Jeff Layton [Mon, 14 Sep 2009 17:24:00 +0000 (13:24 -0400)]
IPv6 support for nfsd was finished before some of the other daemons
(mountd and statd in particular). That could be a problem in the future
if someone were to boot a kernel that supports IPv6 serving with an
older nfs-utils. For now, hardcode the IPv6 switch into the off position
until the other daemons are functional.
Lukas Hejtmanek [Thu, 27 Aug 2009 15:42:24 +0000 (11:42 -0400)]
Gssd blindly caches machine credentials
We have a problem with rpc.gssd which blindly caches machine credentials.
E.g., if someone deletes /tmp/krb5cc_machine_REALM, rpc.gss does not create
new one until the old one expires. Also, it has problems with clock skew, if
time goes back and gssd thinks that machine credentials are not expired yet.
The following patch tries to use cache but in case of failure, it tries it
again without cache. Any comments?
Signed-off-by: Lukas Hejtmanek <xhejtman@ics.muni.cz> Acked-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
J. Bruce Fields [Mon, 24 Aug 2009 12:20:10 +0000 (08:20 -0400)]
Don't give client an empty flavor list
In the absence of an explicit sec= option on an export, rpc.mountd
is returning a zero-length flavor list to clients in the MOUNT results.
The linux client doesn't seem to mind, but the Solaris client
(reasonably enough) is giving up; the symptom is a "security mode
does not match" error on mount.
We could modify the export-parsing code to ensure the secinfo array
is nonzero. But I think it's slightly simpler to handle this default
case in the implementation of the MOUNT call. This is more-or-less the
same thing the kernel does when mountd passes it an export without any
security flavors specified.
Thanks to Tom Haynes for bug report and diagnosis.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Fri, 7 Aug 2009 18:34:42 +0000 (14:34 -0400)]
Now that only the Section names are case-insensitive
the mount code has to make sure the the mount options
given to the kernel are in the correct case.
Steve Dickson [Wed, 5 Aug 2009 20:10:01 +0000 (16:10 -0400)]
Adds '--enable-mountconfig' configuration flag that will
enabled mount to read from a configuration file.
The default value is disabled (or no)
Adds '--with-mountfile' configuration flag that is used when
mountconf is enabled to define the configuration file name.
The default is /etc/nfsmount.conf.
Steve Dickson [Wed, 5 Aug 2009 20:02:33 +0000 (16:02 -0400)]
Added an conditional argument to the Section names
with the format being:
[ Section <"argument"> ]
This will help group similar functioning Section
together. The argument is conditional but must be
surrounded by the '"' characters.
The new conf_get_section() interface can used
to locate a Section by its Section name and/or
argument.
Subexports automatically created by "crossmnt" get the NFSEXP_FSID flag
cleared. That flag should also be cleared in the
security-flavor-specific flag fields. Otherwise the kernel detects the
inconsistent flags and rejects the export.
The symptoms are clients hanging the first time they export a filesystem
mounted under a filesystem that was exported with something like:
/exports *(crossmnt,fsid=0,sec=krb5)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Fri, 14 Aug 2009 17:42:22 +0000 (13:42 -0400)]
Add some clarification about the purpose of the program, info about the
--debug and --syslog options, and a note about how it behaves when
TI-RPC support is built in.
Jeff Layton [Fri, 14 Aug 2009 17:37:12 +0000 (13:37 -0400)]
nfs-utils: add IPv6 support to nfsd
Add support for handing off IPv6 sockets to the kernel for nfsd. One of
the main goals here is to not change the behavior of options and not to
add any new ones, so this patch attempts to do that.
We also don't want to break anything in the event that someone has an
rpc.nfsd program built with IPv6 capability, but the knfsd doesn't
support IPv6. Ditto for the cases where IPv6 is either not compiled in
or is compiled in and blacklisted.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Fri, 14 Aug 2009 17:30:04 +0000 (13:30 -0400)]
nfs-utils: convert nfssvc_setfds to use getaddrinfo
Convert nfssvc_setfds to use getaddrinfo. Change the args that it takes
and fix up nfssvc function to pass in the proper args. The things that
nfssvc has to do to call the new nfssvc_setfds is a little cumbersome
for now, but that will eventually be cleaned up in a later patch.
nfs-utils: break up the nfssvc interface
Currently, the only public interface to the routines in nfssvc.c is
nfssvc(). This means that we do an awful lot of work after closing
stderr that could be done while it's still available.
Add prototypes to the header so that more functions in nfssvc.c can be
called individually, and change the nfsd program to call those routines
individually.
Jeff Layton [Sat, 1 Aug 2009 11:21:26 +0000 (07:21 -0400)]
nfs-utils: declare a static common buffer for nfssvc.c routines
Several of the routines in nfssvc.c declare a buffer for strings. Use a
shared static buffer instead to keep it off of the stack. Also, the
buffer allocated in some places is *really* large. BUFSIZ is generally
8k. These routines don't need nearly that much.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Sat, 1 Aug 2009 10:27:40 +0000 (06:27 -0400)]
nfs-utils: convert rpc.nfsd to use xlog()
...and add --debug and --syslog options.
With the switch to xlog(), it becomes trivial to add debug messages, so
add an option to turn them on when requested.
Also, rpc.nfsd isn't a proper daemon per-se, so it makes more sense to
log errors to stderr where possible. Usually init scripts take care of
redirecting stderr output to syslog anyway.
For those that don't, add a --syslog option that forces all output to go
to syslog instead. Note that even with this option, errors encountered
during option processing will still go to stderr.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Wed, 15 Jul 2009 11:58:22 +0000 (07:58 -0400)]
errno not be set on RPC errors
Changed both nfs_advise_umount() and nfs_gp_ping() to
set the errno by calling CLNT_GETERR() after a CLNT_CALL()
error. Also added code to rpc_strerror() that will log
the errno value, when set, via strerror().
These changes added essential information to the error message
making it much easier to detect errorsuch as "Connection refused"
Steve Dickson [Wed, 15 Jul 2009 10:21:54 +0000 (06:21 -0400)]
Don't use initialized garbage for address lengths
Make sure address lengths are initialized before
call calling nfs_extract_server_addresses() from
nfs_rewrite_pmap_mount_options(). Otherwise the
length check in nfs_string_to_sockaddr() can fail
since its will be using garbage from the stack.
Chuck Lever [Tue, 14 Jul 2009 21:00:47 +0000 (17:00 -0400)]
mount.nfs: Squelch compiler warnings in nfs_strerror()
Address compiler warnings:
error.c: In function nfs_strerror:
error.c:341: warning: comparison between signed and unsigned
error.c:342: warning: comparison between signed and unsigned
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:48:50 +0000 (16:48 -0400)]
mount.nfs: Use correct data type in discover_nfs_mount_data_version()
Address compiler warning:
mount.c: In function discover_nfs_mount_data_version¿:
mount.c:162: warning: comparison between signed and unsigned
mount.c:164: warning: comparison between signed and unsigned
mount.c:166: warning: comparison between signed and unsigned
mount.c:168: warning: comparison between signed and unsigned
mount.c:170: warning: comparison between signed and unsigned
mount.c:178: warning: comparison between signed and unsigned
linux_version_code() and MAKE_VERSION() both return an unsigned int.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:47:09 +0000 (16:47 -0400)]
support: Introduce sockaddr helpers to get and set IP port numbers
Introduce address family-agnostic functions that get and set IP port
numbers in socket addresses. We can already replace a few similar
functions in the mount command, and a few more will come up with
statd and sm-notify.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:45:07 +0000 (16:45 -0400)]
mount.nfs: Don't update extra_opts after text-based negotiation
The umount.nfs command will negotiate the mount options again, so all
that is needed in /etc/mnttab is the original set of options used for
the mount, plus the additional mandatory options like addr=''.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:39:17 +0000 (16:39 -0400)]
mount.nfs: Clean up after restructuring version/protocol negotiation
Fix up comments and function names to reflect the new version/protocol
negotiation scheme. We can now remove a bunch of mount processing
that is specific to v2/v3, removing about 100 lines of logic from
stropts.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:37:02 +0000 (16:37 -0400)]
mount.nfs: Clean up nfs_is_permanent_error()
Clean up: Move nfs_is_permanent_error() closer to the functions that
call it, and update a documenting comment to reflect recent
restructuring in this area.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:35:26 +0000 (16:35 -0400)]
mount.nfs: rearchitect mount version/protocol negotiation logic
Text-based mounts try a mount operation first with default settings,
then negotiate via rpcbind queries and retry the mount, if the default
settings don't work. This method introduces long delays in certain
common scenarios, and makes it difficult to tell when it is
appropriate to fail immediately or negotiate and retry.
To address these behavioral regressions, make text-based mounts
operate the same way that legacy mounts work. Perform rpcbind queries
with short timeouts first, then use the results to determine
transport, version, and port number settings for the mount.
This allows the mount.nfs command to detect server settings, or
whether negotiation is even possible, quickly. It also makes it
simple to determine when to fail vs. when to retry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:34:20 +0000 (16:34 -0400)]
mount.nfs: make nfs_options2pmap return errors
Up until now, nfs_options2pmap() has been passed mount options that
have already gone through the kernel's parser successfully. So, it
never had to check for invalid mount option values.
However, we are about to pass it options that come right from the
user. So nfs_options2pmap() will now need to report an error and
fail if it encounters a bogus value for any of the options it cares
about.
=====
Note that nfs_options2pmap() will allow a bogus value for an option
if the same option is specified farther to the right with a useable
value.
For example, if a user specifies "proto=foo,...,tcp" then
nfs_options2pmap() uses "tcp" and ignores "proto=foo".
However, if the options are specified in the other order:
"tcp,...,proto=foo" then nfs_options2pmap() will fail. This is a simple
and unambiguous extension of the "rightmost wins" rule.
Since mount.nfs strips out these options out and replaces them with
the rpcbind-negotiated options before invoking mount(2), the kernel
should never receive bogus values for these options from mount.nfs in
such cases.
This is probably slightly more flexible behavior than the legacy
mount implementation, but should be harmless. All mount options
unrelated to pmap are ignored by nfs_options2pmap().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:31:15 +0000 (16:31 -0400)]
mount.nfs: force rpcbind queries if options aren't specified
nfs_options2pmap() fills in default values if the passed-in mount
options don't specify values. This short-circuits the version, port,
and transport negotiation logic in nfs_probe_bothports().
Instead, nfs_options2pmap() should plant zeros in these pmap fields
to force nfs_probe_bothports() and nfs_advise_mount() to discover, via
rpcbind queries, what the server supports.
This fixes some scenarios where umount.nfs fails to connect to servers
that don't have all rpcbind ports open, in addition to fixing other
corner cases during mount.nfs version/protocol negotiation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:29:11 +0000 (16:29 -0400)]
mount.nfs: If port= specifies an unregistered port, retry, then fail
Suppose a port= option is specified on the mount command line, but not
enough other mount options are specified to avoid an rpcbind query to
discover the NFS service.
If the NFS service isn't registered on [100003, 3, "tcp", port] (even
if the server is listening on the specified port), the legacy mount.nfs
command fails immediately with:
mount.nfs: mount to NFS server 'server' failed: RPC Error: Success
What's more, this mount request should succeeded if an NFS service is
registered on the specified port for another version and/or protocol.
So instead, let's retry the rpcbind query with the other versions and
transport protocols to be absolutely sure that port won't work with
either version or transport. Then, if all fails, report:
mount.nfs: mount to NFS server 'server' failed:
RPC Error: Program not registered
This change also affects text-based mounts that require negotiation
by the mount.nfs command.
Note that if the mount options specify all four pmap parameters for
NFS, the rpcbind query for the NFS service is skipped entirely. The
mount command then hangs and times out later if NFS service is not
listening on the requested tuple. This is unchanged from previous
behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:27:54 +0000 (16:27 -0400)]
getport: Convert TCP connection refused to RPC_CANTRECV
In a similar vein to the timeout logic we just restored, a refused
TCP connection should be mapped to an equivalent UDP error code:
RPC_CANTRECV.
This is new behavior for TCP connections; the legacy mount command
appears to have simply failed immediately if a TCP connection was
refused during an rpcbind query.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
The latest versions of mount.nfs appear not to fall back to
UDP if TCP isn't available on the server.
Our new nfs_getport() implementation is missing a bit of logic
from the original mount getport() implementation. Without it,
nfs_probe_port() sees a TCP connect timeout as a permanent error,
so it fails immediately instead of attempting to try again with
UDP.
Similar changes for our new ping API (see the old clnt_ping()
function, which is still in utils/mount/network.c).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:25:43 +0000 (16:25 -0400)]
mount.nfs: Add more debugging output around nfs_getport()
So we can see how rpcbind queries are failing during mount processing,
add some debugging messages (enabled with "mount.nfs -v") around the
nfs_getport() calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:24:11 +0000 (16:24 -0400)]
getport: Clear shared error fields before trying rpcbind queries
Some RPC errors set fields in rpc_createerr.cf_error in addition
to cf_stat. Be sure to clear _all_ error fields in rpc_createerr
each time through the rpcbind API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:21:01 +0000 (16:21 -0400)]
getport: RPC_PROGNOTREGISTERED is a permanent error
rpcbind returns RPC_PROGNOTREGISTERED if it knows for certain that an
RPC program is not supported for a given transport. This is a
permanent and authoritative error, so the library's rpcbind query API
should never retry the query -- it will only get the same answer.
A similar change was submitted for libtirpc. Unlike rpcb_getaddr(3t),
mount.nfs's rpcbind client only retries once (with RPCB3PROC_GETADDR),
but an extra TCP socket in this case would leave another port in
TIME_WAIT. It's infrequent enough, but might as well get rid of it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:18:37 +0000 (16:18 -0400)]
support: Set proper retransmit timeout for datagram transports
Instead of setting the total timeout and the retransmit timeout to the
same value for datagram transports, use a 1 second retransmit timeout,
so we actually get a retransmit or two before failing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:17:28 +0000 (16:17 -0400)]
support: Don't return RPC_UNKNOWNHOST from rpc_socket.c
RPC_UNKNOWNHOST means a hostname isn't known -- basically it's
EAI_NONAME from getaddrinfo(3). Since the functions in rpc_socket.c
don't take a hostname argument, RPC_UNKNOWNHOST is not an appropriate
return code from these functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:12:23 +0000 (16:12 -0400)]
getport: replace getnameinfo(NI_NUMERICHOST) with inet_ntop(3)
getnameinfo(3) with the NI_NUMERICHOST flag is used in
support/nfs/getport.c to convert socket addresses to universal address
strings.
Older versions of glibc do not have getnameinfo(3), however. In order
for nfs-utils to build on older systems we switch in legacy code via
HAVE_GETNAMEINFO and use inet_ntoa(3).
A problem with this is that we have to double our test matrix to be
sure that both versions of these routines build and operate correctly.
Another minor problem is that inet_ntoa(3) is officially deprecated.
So let's always use a single implementation based on inet_ntop(3).
Universal address strings do not support link-local / scope IDs, so we
don't lose any functionality by using inet_ntop(3) here.
This means we open code a bit of logic that is available in most
modern versions of glibc, but in return we can use exactly the same
code for all builds (on systems with getnameinfo(3) and without).
An additional benefit is we can avoid using NI_MAXHOST for character
buffers that live on the stack: it's 1025 bytes. Instead,
INET6_ADDRSTRLEN is used, which is just 46 bytes, plus an additional
eight bytes for the port information. We add beefier buffer overflow
detection logic as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 14 Jul 2009 20:11:08 +0000 (16:11 -0400)]
getport: Remove AI_ADDRCONFIG from nfs_gp_loopback_address()
AI_ADDRCONFIG was used ostensibly to figure out if the local system
had IPv6 available when generating a loopback address.
A legacy version of nfs_gp_loopback_address() was created to handle
ANYADDR address generation for old versions of glibc where
AI_ADDRCONFIG doesn't exist. This means we have to be careful to
test both the normal and legacy versions when committing changes in
this area.
But it turns out that even contemporary versions of glibc ignore
AI_ADDRCONFIG when the hostname string is NULL. getaddrinfo(3)
always returns an AF_INET and an AF_INET6 loopback address in this
case, no matter how the system is configured.
Change nfs_gp_loopback_address() to have one version that simply looks
up "localhost" instead of doing anything fancy. If "localhost" is an
IPv6 address, we'll use that. Otherwise, it should nearly always be
an AF_INET loopback address.
This eliminates the need for AI_ADDRCONFIG, and removes the duplicate
version of nfs_gp_loopback_address(). Note that callers never used
the port number in the returned socket address, so get rid of the
"sunrpc" service string too.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Mon, 29 Jun 2009 14:44:20 +0000 (10:44 -0400)]
mydaemon: remove closeall() calls from mydaemon()
idmapd and svcgssd have a mydaemon() routine that uses closeall() to
close file descriptors. Unfortunately, they aren't using it correctly
and it ends up closing the pipe that the child process uses to talk to
its parent.
Fix this by not using closeall() in this routine and instead, just close
the file descriptors that we know need to be closed. If /dev/null can't
be opened for some reason, then just have the child exit with a non-zero
error.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Mon, 22 Jun 2009 14:05:44 +0000 (10:05 -0400)]
The closeall function is broken in such a way that it almost never
closes any file descriptors. It's calling strtol on the text
representation of the file descriptor, and then checking to see if the
value of *endptr is not '\0' before trying to close the file. This check
is wrong.
When strtol returns an endptr that points to a NULL byte, that indicates
that the conversion was completely successful. I believe this check
should instead be requiring that endptr is pointing to '\0' before
closing the fd.
Also, fix up the function to check for conversion errors from strtol. If
one occurs, just skip the close on that entry.
Finally, as Trond pointed out, it's unlikely that readdir will return a
blank string in d_name but that situation wouldn't be detected by the
current code. This patch adds such a check and skips the close if it
occurs.
Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Mon, 22 Jun 2009 13:49:17 +0000 (09:49 -0400)]
Make --enable-tirpc the default. If --enable-tirpc wasn't explicitly
specified, but TIRPC libs or headers aren't present then just throw a
warning and disable it. If it was explicitly specified, then throw an
error and exit if they aren't present.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
NeilBrown [Wed, 3 Jun 2009 19:48:08 +0000 (15:48 -0400)]
Retry export if getfh fails.
mountd tries to avoid telling the kernel to export something
when the kernel already knows to do that.
However sometimes (exportfs -r) the kernel can be told
to forget something without mountd realising.
So if mountd finds that it cannot get a valid filehandle,
make sure it really has been exported to the kernel.
This only applies if the nfsd filesystem is not mounted.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 18 May 2009 17:29:38 +0000 (13:29 -0400)]
umount.nfs: Harden umount.nfs error reporting
Add additional error reporting to nfs_advise_umount().
These messages can be displayed if the "-v" option
is specified with umount.nfs. Normally these
messages do not appear.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 18 May 2009 15:17:49 +0000 (11:17 -0400)]
mount: remove legacy version of nfs_name_to_address()
Currently we have two separate copies of nfs_name_to_address() since
some older glibc's don't define AI_ADDRCONFIG. This means extra
work to build- and run-test both functions when code is changed in
this area.
It is also the case that gethostbyname(3) is deprecated, and should
not be used in new code.
Remove the legacy code in favor of always using getaddrinfo(3).
We can also get rid of nfs_name_to_address()'s @family argument as
well.
Note also this addresses a bug in nfsumount.c -- it was calling
nfs_name_to_address() with AF_UNSPEC unconditionally, even if the
legacy version of nfs_name_to_address(), which doesn't support
AF_UNSPEC, was in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 18 May 2009 15:08:53 +0000 (11:08 -0400)]
sm-notify: Failed DNS lookups should be retried
Currently, if getaddrinfo(3) fails when trying to resolve a hostname,
sm-notify gives up immediately on that host. If sm-notify is started
before network service is available on a system, that means it quits
without notifying anyone. Or, if DNS service isn't available due to
a network partition or because the DNS server crashed, sm-notify will
simply remove all of its callback files and exit.
Really, sm-notify should try harder. We know that the hostnames
passed in to notify_host() have already been vetted by statd, which
won't monitor a hostname that it can't resolve. So it's likely that
any DNS failure we meet here is a temporary condition. If it isn't,
then sm-notify will stop trying to notify that host in 15 minutes
anyway.
[ The host's file is left in /var/lib/nfs/sm.bak in this case, but
sm.bak is not read again until the next time sm-notify runs. ]
sm-notify already has retry logic for handling RPC timeouts. We can
co-opt that to drive DNS resolution retries.
We also add AI_ADDRCONFIG because on systems whose network startup is
handled by NetworkManager, there appears to be a bug that causes
processes that started calling getaddinfo(3) before the network came
up to continue getting EAI_AGAIN even after the network is fully
operating.
As I understand it, legacy glibc (before AI_ADDRCONFIG was exposed in
headers) sets AI_ADDRCONFIG by default, although I haven't checked
this. In any event, pre-glibc-2.2 systems probably won't run
NetworkManager anyway, so this may not be much of a problem for them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 18 May 2009 15:03:54 +0000 (11:03 -0400)]
sm-notify: Don't orphan addrinfo structs
sm-notify orphans an addrinfo struct in its address list rotation
logic if only a single result was returned from getaddrinfo(3).
For each host, the first time through notify_host(), we want to
send a PMAP_GETPORT request. ->ai is NULL, and retries is set to 100,
forcing a DNS lookup and an address rotation. If only a single
addrinfo struct is returned, the rotation logic causes a NULL to be
planted in ->ai, copied from the ai_next field of the returned result.
This means that the second time through notify_host() (to perform the
actual SM_NOTIFY call) we do a second DNS lookup, since ->ai is NULL.
The result of the first lookup has been orphaned, and extra network
traffic is generated.
This scenario is actually fairly common. Since we pass
.ai_protocol = IPPROTO_UDP,
to getaddrinfo(3), for most hosts, which have a single forward and
reverse pointer in the DNS database, we get back a single addrinfo
struct as a result.
To address this problem, only perform the address list rotation if
there is more than one element on the list returned by getaddrinfo(3).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Benny Halevy [Mon, 4 May 2009 15:44:49 +0000 (11:44 -0400)]
utils/nfsd: add support for minorvers4
minorvers4 can be used to either enable or disable nfsv4.x.
If minorvers4 is a positive integer n, in the allowed range (only
minorversion 1 is supported for now), the string "+4.n" is appended
to the versions string written onto /proc/fs/nfsd/versions.
Correspondingly, if minorver4 is a negative integer -n, the string
"-4.n" is written.
With the default value, minorvers4==0, the minor version
setting is not changed.
Note that unlike the protocol versions 2, 3, or 4. The minor version
setting controls the *maximum* minor version nfsd supports. Particular
minor version cannot be controlled on their own. With only minor
version 1 supported at the moment the difference doesn't matter,
but for future minor versions greater than 1, enabling minor
version X will enable support for all minor versions 1 through X.
Disabling minor version X will disable support for minor
versions X and up, enabling 1 through X-1.
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Sat, 18 Apr 2009 13:43:58 +0000 (09:43 -0400)]
support: Provide an API for creating a privileged RPC client
We needed to guarantee that some RPC programs, such as PMAP, got an
unprivileged port, to prevent exhausting the local privileged port
space sending RPC requests that don't need such privileges.
nfs_get_rpcclient() provides that feature.
However, some RPC programs, such as MNT and UMNT, require a privileged
port. So, let's provide an additional API for this that also supports
IPv6 and setting a destination port.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
as currently printed c is the version number, not a string char,
therefore is should be printed as %d not %c. That said, just print
optarg as %s since it might be non-numeric.
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 15 Apr 2009 16:38:40 +0000 (12:38 -0400)]
nfs-utils: reverse order of librpcsecgss and libgssglue checks
The check that validates the version of librpcsecgss also needs to
have libgssglue installed. Without libgssglue, ./configure complains
that it can't find rpcsecgss, even though it's installed.
It also turns out that the error message generated by pkg-config is
more complete than the one we have in aclocal/rpcsec_vers.m4, so just
let those PKG_CHECK_MODULES m4 macros use the default error message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 16:04:06 +0000 (12:04 -0400)]
nfs-utils: add IPv6 code to gssd
All of the pieces to handle IPv6 are now in place. Add IPv6-specific
code wrapped in the proper #ifdef's so that IPv6 support works when
it's enabled at build-time.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 16:01:46 +0000 (12:01 -0400)]
nfs-utils: switch gssd to use standard function for getting an RPC client
We already have a common function for setting up an RPC client. That
function uses the tirpc API when tirpc is enabled and is also already
IPv6 enabled. Switch gssd to use it.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 15:36:07 +0000 (11:36 -0400)]
nfs-utils: query for remote port using rpcbind instead of getaddrinfo
We already have the server's address from the upcall, so we don't really
need to look it up again, and querying the local services DB for the
port that the remote server is listening on is just plain wrong.
Use rpcbind to set the port for the program and version that we were
given in the upcall. The exception here is NFSv4. Since NFSv4 mounts
are supposed to use a well-defined port then skip the rpcbind query
for that and just set the port to the standard one (2049).
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 15:34:51 +0000 (11:34 -0400)]
nfs-utils: store the address given in the upcall for later use
The current upcall could be more efficient. We first convert the address
to a hostname, and then later when we set up the RPC client, we do a
hostname lookup to convert it back to an address.
Begin to change this by keeping the address in the clnt_info that we get
out of the upcall. Since a sockaddr has a port field, we can also
eliminate the port from the clnt_info.
Finally, switch to getnameinfo() instead of gethostbyaddr(). We'll need
to use that call anyway when we add support for IPv6.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 14:29:04 +0000 (10:29 -0400)]
nfs-utils: make getnameinfo() required for --enable-gss
Systems that are so old that they don't have getnameinfo() in glibc are
probably also running kernels that are so old that they don't support
gssapi upcalls anyway.
Make --enable-gss dependent on the presence of the getnameinfo()
function. This allows us to reduce some conditional compilation.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Wed, 8 Apr 2009 14:26:26 +0000 (10:26 -0400)]
The --list option does not work on server stats.
The print_stats_list() routine was using the client's
stats to decide whether to display any stats. This did
not work when there was only server stats.
This patch breaks up print_stats_list into two different
routines allowing both server and clients stats to be
listed.
Steve Dickson [Wed, 8 Apr 2009 13:28:22 +0000 (09:28 -0400)]
Eliminate the displaying zero stats when the explicit protocol
is specified (-2, -3, -4) the -Z and or --list options.
When a particular protocol is specified and either
the -Z or --list options are used, zeros or blank lines
are echoed to the screen when there is not any NFS traffic.
This cause any useful data to be scroll off the screen.
With this patch only non-zero stats will be shown, which
makes the output of these options more condensed and
in turn more useful.
nfsstat.c: Adds the --list flag to print information in a list format
instead of the standard multi-column format
nfsstat.man: Updates the manpage to include the --list flag.
Signed-off-by: Kevin Constantine <kevin.constantine@disneyanimation.com> Signed-off-by: Steve Dickson <steved@redhat.com>
projects / nfs-utils.git / log