Imported Debian patch 1.0.11~git-20060117-2

[nfs-utils.git] / Makefile.in

diff --git a/Makefile.in b/Makefile.in
index 58d87e4044d0e4c64a8b87f9b47d47533753d1b3..6db1cb4d9a96d6744a2f78ee9cf5d150b5638399 100644 (file)
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -33,7 +33,6 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-build_triplet = @build@
 host_triplet = @host@
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
        $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
@@ -50,7 +49,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(mkdir_p)
 CONFIG_HEADER = $(top_builddir)/support/include/config.h
 CONFIG_CLEAN_FILES =
 SOURCES =
@@ -134,6 +133,7 @@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 K5VERS = @K5VERS@
 KRBCFLAGS = @KRBCFLAGS@
 KRBDIR = @KRBDIR@
+KRBLDFLAGS = @KRBLDFLAGS@
 KRBLIBS = @KRBLIBS@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
@@ -177,8 +177,6 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -312,13 +310,7 @@ uninstall-info-am:
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
 $(RECURSIVE_TARGETS):
-       @failcom='exit 1'; \
-       for f in x $$MAKEFLAGS; do \
-         case $$f in \
-           *=* | --[!k]*);; \
-           *k*) failcom='fail=yes';; \
-         esac; \
-       done; \
+       @set fnord $$MAKEFLAGS; amf=$$2; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -330,7 +322,7 @@ $(RECURSIVE_TARGETS):
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-         || eval $$failcom; \
+          || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
@@ -338,13 +330,7 @@ $(RECURSIVE_TARGETS):
 
 mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
-       @failcom='exit 1'; \
-       for f in x $$MAKEFLAGS; do \
-         case $$f in \
-           *=* | --[!k]*);; \
-           *k*) failcom='fail=yes';; \
-         esac; \
-       done; \
+       @set fnord $$MAKEFLAGS; amf=$$2; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
@@ -365,7 +351,7 @@ maintainer-clean-recursive:
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-         || eval $$failcom; \
+          || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        done && test -z "$$fail"
 tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -467,17 +453,15 @@ distdir: $(DISTFILES)
            || exit 1; \
          fi; \
        done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+       list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
-           || $(mkdir_p) "$(distdir)/$$subdir" \
+           || mkdir "$(distdir)/$$subdir" \
            || exit 1; \
-           distdir=`$(am__cd) $(distdir) && pwd`; \
-           top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
            (cd $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
-               top_distdir="$$top_distdir" \
-               distdir="$$distdir/$$subdir" \
+               top_distdir="../$(top_distdir)" \
+               distdir="../$(distdir)/$$subdir" \
                distdir) \
              || exit 1; \
          fi; \
@@ -488,15 +472,15 @@ distdir: $(DISTFILES)
          ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
        || chmod -R a+r $(distdir)
 dist-gzip: distdir
-       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+       $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)
 
 dist-bzip2: distdir
-       tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+       $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
        $(am__remove_distdir)
 
 dist-tarZ: distdir
-       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+       $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
        $(am__remove_distdir)
 
 dist-shar: distdir
@@ -509,7 +493,7 @@ dist-zip: distdir
        $(am__remove_distdir)
 
 dist dist-all: distdir
-       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+       $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
@@ -518,11 +502,11 @@ dist dist-all: distdir
 distcheck: dist
        case '$(DIST_ARCHIVES)' in \
        *.tar.gz*) \
-         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
        *.tar.bz2*) \
-         bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+         bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
        *.tar.Z*) \
-         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+         uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
        *.shar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
        *.zip*) \
@@ -603,7 +587,7 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
@@ -672,14 +656,13 @@ uninstall-info: uninstall-info-recursive
        distclean-generic distclean-libtool distclean-recursive \
        distclean-tags distcleancheck distdir distuninstallcheck dvi \
        dvi-am html html-am info info-am install install-am \
-       install-data install-data-am install-data-hook install-exec \
-       install-exec-am install-info install-info-am install-man \
-       install-strip installcheck installcheck-am installdirs \
-       installdirs-am maintainer-clean maintainer-clean-generic \
+       install-data install-data-am install-exec install-exec-am \
+       install-info install-info-am install-man install-strip \
+       installcheck installcheck-am installdirs installdirs-am \
+       maintainer-clean maintainer-clean-generic \
        maintainer-clean-recursive mostlyclean mostlyclean-generic \
        mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-       tags tags-recursive uninstall uninstall-am uninstall-hook \
-       uninstall-info-am
+       tags tags-recursive uninstall uninstall-am uninstall-info-am
 
 
 install-data-hook: