1 2008-12-09 Philipp Kern <pkern@debian.org>
3 * daklib/queue.py (cross_suite_version_check): add an additional
4 parameter to specify if an upload is sourceful or not; do not reject
5 uploads that do not satisfy the "must be newer than" criteria and
7 * daklib/queue.py (check_source_against_db, check_binary_against_db):
8 invoke cross_suite_version_check as above
10 2008-12-04 Philipp Kern <pkern@debian.org>
12 * dak/process_new.py (recheck): call reject for
13 Upload.check_{binary,source}_against_db with an empty prefix to not
16 2008-11-30 Philipp Kern <pkern@debian.org>
18 * dak/process_unchecked.py (do_stableupdate, do_oldstableupdate):
19 move files to NEW for {old,}stable-proposed-updates world-readable
22 2008-11-30 Joerg Jaspert <joerg@debian.org>
24 * config/debian/apt.conf: Lets generate experimental content
27 * dak/daklib/queue.py (Upload.cross_suite_version_check): Add a
28 few () to make cross_suite_version_check finally work as
29 intended (well, we hope). Thanks to Philipp Kern for spotting this.
31 2008-11-28 Mark Hymers <mhy@debian.org>
33 * dak/new_security_install.py: Don't attempt to delete the .changes files
34 which have already been moved to queue/done by now.
36 2008-11-27 Mark Hymers <mhy@debian.org>
38 * dak/new_security_install.py: Attempt to tidy up the buildd queue. The
39 buildd team believes that the fact that the packages are in the security
40 pool after this point should be good enough.
42 2008-11-25 Joerg Jaspert <joerg@debian.org>
44 * dak/process_unchecked.py (queue_(un)embargo): (Hopefully) enable
45 sending mails again, which got broken when testing-security
46 handling was (not completly correctly) implemented. Closes: #440004
48 2008-11-24 Joerg Jaspert <joerg@debian.org>
50 * dak/process_unchecked.py (check_signed_by_key): remove the
51 binary-upload restriction stuff. unused.
53 * config/debian-security/apt.conf.buildd: byebye sarge
55 * scripts/nfu/get-w-b-db: remove m68k
57 * scripts/debian/update-ftpstats: remove m68k
59 * config/debian/dak.conf: remove m68k
60 remove the binary-upload-restrictions
62 * config/debian/vars (archs): Remove m68k
64 2008-11-23 Joerg Jaspert <joerg@debian.org>
66 * dak/process_unchecked.py (check_files): fix this armel mess
68 * config/debian-security/dak.conf: Set ValidTime
70 * config/debian-security/cron.weekly: Added
72 2008-11-17 Joerg Jaspert <joerg@debian.org>
74 * dak/security-install.py: Removed, no longer in use.
76 2008-11-16 Joerg Jaspert <joerg@debian.org>
78 * scripts/debian/mkfilesindices: useless typical, doesnt have
79 i18n/ dirs. Force them in (i hope).
81 2008-11-15 Thomas Viehmann <tv@beamnet.de>
83 * dak/show_deferred.py: handle uploads that do not close bugs
85 2008-11-11 Joerg Jaspert <joerg@debian.org>
87 * config/debian/dak.conf: good bye oldstable/o-p-u
89 2008-11-10 Joerg Jaspert <joerg@debian.org>
91 * config/debian/cron.unchecked: how about us ignoring bugs.d.o
92 down? It's not like it is time critical or something to transfer
93 this stuff, it doesn't hurt to have it there a bit later...
95 2008-11-08 Joerg Jaspert <joerg@debian.org>
97 * config/debian/cron.hourly: Create new tracefile format.
99 2008-11-05 Joerg Jaspert <joerg@debian.org>
101 * dak/new_security_install.py (_do_Approve): This sudo call
102 definitely wants the -H option.
104 2008-11-01 Joerg Jaspert <joerg@debian.org>
106 * dak/process_unchecked.py (check_files): Also check the
107 upload_suite for uploads. I guess we could kill the default_suite
108 totally, but for now we just look into the upload_suite one too.
110 * config/debian-security/dak.conf: Let DefaultSuite be stable
112 2008-10-27 Joerg Jaspert <joerg@debian.org>
114 * scripts/debian/mkfilesindices: Remove oldstable
116 * config/debian/vars: Remove sarge
118 * config/debian/dak.conf: Untouchable o-p-u, until we removed all
119 of sarge and its files.
121 * config/debian/apt.conf.oldstable: Removed
123 * config/debian/apt.conf: Remove oldstable
125 2008-10-14 Thomas Viehmann <tv@beamnet.de>
127 * dak/show_deferred.py: produce .changes and improve status
129 2008-10-07 Joerg Jaspert <joerg@debian.org>
131 * config/debian/cron.dinstall: Only keep the last 60 days of
132 dinstall logfiles on disc.
134 2008-10-05 Thomas Viehmann <tv@beamnet.de>
136 * daklib/database.py: added get_suites
137 * dak/dak.py, dak/show_deferred.py: add show-deferred to dak.
139 2008-09-23 Joerg Jaspert <joerg@debian.org>
141 * config/debian/dak.conf: Add the validtime fields, set to 7
144 * dak/generate_releases.py (main): Add a "Valid-Until" line into
145 our release files, meaning "$receiver shouldn't trust this files
146 after that date". Should be used by apt and similar tools to
147 detect some kind of MITM attacks, see #499897
149 2008-09-21 Joerg Jaspert <joerg@debian.org>
151 * config/debian/cron.hourly: Generate the DEFERRED queue
154 2008-09-13 Philipp Kern <pkern@debian.org>
156 * dak/queue.py (dump_vars): make .dak u,g=rw,o=r; James'
157 assumption (as stated in 2002-05-18's ChangeLog entry)
158 was that people will use the information therein albeit
159 it is "just" a duplication of information present in
160 other control files; people should still not use it
161 as source of information but access to those files makes
162 dak debugging easier and there is no leak of sensitive
165 2008-09-12 Philipp Kern <pkern@debian.org>
167 * dak/new_security_install.py (actually_upload): remove
168 oldstable-security/amd64 check; Etch, as the next oldstable,
169 already had proper amd64 support
171 2008-09-12 Joerg Jaspert <joerg@debian.org>
173 * scripts/debian/update-pseudopackages.sh: s/i/file/
175 2008-09-11 Joerg Jaspert <joerg@debian.org>
177 * config/debian/pseudo-packages.description, ...maintainers:
178 Removed, now with the bts people
180 * scripts/debian/update-pseudopackages.sh: Added, fetching
181 pseudo-packages from new bts location
183 * scripts/debian/mkmaintainers: Use new location
185 2008-09-08 Philipp Kern <pkern@debian.org>
187 * dak/check_archive.py (check_checksums): rewind the files
188 before the sha1sum/sha256sum checks as they got seeked by
191 * daklib/utils.py (build_file_list): do not die on very
192 old dsc files without format header
194 2008-09-07 Philipp Kern <pkern@debian.org>
196 * daklib/utils.py (check_hash): try..except..finally only
197 works on python >=2.5.
199 * dak/process_accepted.py (install): better use dsc_file
200 instead of the (for the loop iteration) static file
203 2008-09-07 Philipp Kern <pkern@debian.org>
205 * daklib/utils.py (check_hash): change the comment and warn
206 if a file is not found when checking the hashes (i.e. when
207 it is probably in the pool)
209 * daklib/utils.py (check_size): do not bail out if the file
210 is not found, because it may be in the pool
212 * dak/process_accepted.py (install): bail out and skip the
213 upload when ensure_hashes fails, print the rejection messages
216 2008-08-28 Philipp Kern <pkern@debian.org>
218 * daklib/utils.py (check_hashes): adapt to different API, check
221 * daklib/utils.py (parse_changes, parse_deb822): refactor
222 the string-based logic of parse_changes into a new function
223 parse_deb822; parse_changes itself remains file-based
225 * daklib/utils.py (hash_key): gives the key of a hash in the
228 * daklib/utils.py (create_hash, check_size): made more readable
230 * daklib/utils.py (check_hash): just check the hashes and complain
231 about missing checksums
233 * daklib/utils.py (check_hash_fields): function to reject unknown
236 * daklib/utils.py (_ensure_changes_hash, _ensure_dsc_hash): helper
237 functions for ensure_hashes; check their corresponding manifests'
240 * daklib/utils.py (ensure_hashes): retrieve the checksums fields
241 from the original filecontents blob so that they do not need to
242 be present in the .dak; refactored the actual checks by calling
243 the aforementioned helper functions
245 * daklib/utils.py (parse_checksums): parse a given checksums field
246 in a manifest and insert the values found into the files dict,
247 checking the file sizes on the way
249 2008-09-06 Philipp Kern <pkern@debian.org>
251 * dak/process_new.py (is_source_in_queue_dir): Access the right
252 variable to check if the given entry in the queue is the sourceful
253 upload we are looking for.
255 2008-09-02 Joerg Jaspert <joerg@debian.org>
257 * config/debian/pseudo-packages.description: Added debian-i18n and
260 * dak/process_new.py (_accept): Fix Philipps new helper function
261 to not break by moving Upload.build_summaries there.
263 2008-08-31 Philipp Kern <pkern@debian.org>
265 * dak/process_new.py (_accept): new helper function to accept
266 an upload regularly, obeying no-action if set
267 * dak/process_new.py (do_accept): use _accept
268 * dak/process_new.py (do_accept_stableupdate): bail out in else
269 on binary uploads, in case we missed something; use the _accept
272 2008-08-30 Philipp Kern <pkern@debian.org>
274 * dak/process_new.py (is_source_in_queue_dir): join the queue path
275 because os.listdir entries come with their path stripped
277 2008-08-30 Philipp Kern <pkern@debian.org>
279 * dak/process_new.py (do_accept_stableupdate): state what we intend
282 2008-08-26 Philipp Kern <pkern@debian.org>
284 * dak/process_new.py (is_source_in_queue_dir): fix variable usage
285 * dak/process_new.py (move_to_holding): just state what we intend
286 to do in no-action mode
287 * dak/process_new.py (do_accept_stableupdate): fetch summaries,
288 fix invokation of is_source_in_queue_dir, actually accept sourceful
289 uploads in p-u holding
291 2008-08-26 Philipp Kern <pkern@debian.org>
293 * dak/process_new.py (do_accept): do not try to free the unchecked
294 lockfile in no-action mode
296 2008-08-16 Joerg Jaspert <joerg@debian.org>
298 * config/debian/cron.dinstall: We dont want i18n to ever fail
299 dinstall, add a || true
301 2008-08-15 Mark Hymers <mhy@debian.org>
303 * daklib/utils.py: Actually import a module before using it.
305 * daklib/utils.py: Actually check we have basedict before trying to
308 * dak/process_accepted.py, dak/process_unchecked.py,
309 daklib/database.py: Don't change get_files_id to use sha1sum and
312 * setup/init_pool.sql, dak/check_archive.py, dak/decode_dot_dak.py,
313 dak/process_accepted.py, dak/process_unchecked.py, daklib/database.py,
314 daklib/queue.py, daklib/utils.py: Attempt to add sha1sum and
315 sha256sums into the database. The complication is that we have to
316 keep backwards compatibility with the .dak files already in existance.
317 Note that import_archive hasn't been hacked to deal with this yet.
319 2008-08-14 Joerg Jaspert <joerg@debian.org>
321 * config/debian/cron.dinstall: Added the i18n retrieval of package
322 description translations
324 2008-08-12 Joerg Jaspert <joerg@debian.org>
326 * config/debian/cron.dinstall: Complicate the i18n export a little
327 by using date/hour based directories which we then link into the
328 web view. They contain a signed timestamp file now, which means
329 the i18n people can take a long time to generate files, yet we
330 still know exactly on which dataset their data is based on, and
331 can then verify it with that. Ensures we only get descriptions for
332 packages we know off (or knew of in the past 2 days).
334 2008-08-11 Joerg Jaspert <joerg@debian.org>
336 * web/dinstall.html: Added
338 * config/debian/dak.conf: Added back the pgp keyrings for now, as
339 it seems that we should keep it for a few more days, until we
340 somehow got ll those oldtimers to get a newer key into the
341 keyring. Unfortunately our logic to look for uploads done from
342 that keyring wasnt the most perfect one, so well, it is actually
345 2008-08-09 Joerg Jaspert <joerg@debian.org>
347 * config/debian/dak.conf: No longer use the pgp keyring - no
348 uploads recorded for any of the pgp keys for a long time.
350 * config/debian/cron.dinstall: Export the i18n foo.
352 2008-08-08 Joerg Jaspert <joerg@debian.org>
354 * config/debian/cron.dinstall: Create a hardlinked tree of the
355 ftp/ in mirror/ so we have more atomic mirror updates for the
358 * config/debian/cron.unchecked: Added signing of buildd incoming
360 2008-08-07 Philipp Kern <pkern@debian.org>
362 * dak/process_new.py (do_accept): handle uploads to (oldstable-)
363 proposed-updates differently and put them into p-u holding
364 for review instead of unconditionally accepting them into
365 p-u proper; additional care needed to be taken to look
366 out for the source if a binary-only upload is being handled
368 2008-08-07 Joerg Jaspert <joerg@debian.org>
370 * dak/cruft_report.py (parse_nfu): call utils.warn instead of warn
371 (main): Only do the nfu stuff if nfu is a check we want to run
373 (main): And another place where we dont want to do nfu foo unless
376 * dak/make_suite_file_list.py (main): Fix a bug that has been
377 there for ages, but "just" never triggered.
379 2008-08-07 Stephen Gran <sgran@debian.org>
381 * Drop use of exec to eval variable interpolation
382 2008-08-07 Joerg Jaspert <joerg@debian.org>
384 * dak/process_accepted.py (install): Error out with the new
385 exception if we dont know the source package for a file we want to
386 install. Shouldn't ever hit us, but better safe than sorry.
388 * daklib/dak_exceptions.py (dakerrors): new exception - no source field.
390 2008-08-05 Joerg Jaspert <joerg@debian.org>
392 * config/debian/cron.unchecked: disable the ssh-move insanity (and
393 as soon as rietz is back online - replace it with a one-line scp
394 or rsync statement followed by a one-line rm)
395 And now replaced this 128 line perl "not-invented-here" with a
396 one-line rsync command, using a feature rsync only understands
397 since sarge - damn new-fangled technology.
399 2008-08-05 Joachim Breitner <nomeata@debian.org>
401 * dak/cruft_report.py: In full mode, report out-of-date binaries on
402 architectures that have set Not-For-Us for that package.
404 * scripts/nfu/get-w-b-db: Script to fetch the wanna-build database
405 dump from http://buildd.debian.org/
407 * config/debian/cron.weekly: Run the above script
409 2008-08-03 Mark Hymers <mhy@debian.org>
411 * dak/process_new.py: Apply jvw's patch so that process_new shows
412 packages which need binary uploads sorted earlier than other packages.
414 2008-07-26 Joerg Jaspert <joerg@debian.org>
416 * templates/reject-proposed-updates.rejected,dak/reject_proposed_updates.py:
417 applied a patch by luk modifying the stable rejection mails to fit
420 * config/debian/dak.conf: no m68k in testing, so no m68k in t-p-u
423 2008-06-19 Thomas Viehmann <tv@beamnet.de>
425 * dak/process_unchecked.py (check_dsc,check_hashes): Catch
426 UnknownFormatError and reject
428 2008-06-15 Joerg Jaspert <joerg@debian.org>
430 * config/debian/cron.weekly: Work around a git bug until git is
431 fixed upstream and the fix is on backports.org
433 * config/debian/cron.dinstall: (various ssh calls): Make them use
434 batchmode/connect/setuptimeout to not take too long with
435 connections... Also || true them, no need to die in dinstall if
436 one host isn't reachable.
437 Also do not die when the ldap server is unreachable, just ignore
440 * README: Updated mailing list location
442 2008-06-14 Otavio Salvador <otavio@debian.org>
444 * docs/manpages/clean-suites.1.sgml: Minor typo fix
446 * dak/import_archive.py: Add support to udeb packages
448 * dak/control_suite.py (main): Handle SystemError exception in
449 case of a incompatible commandline parameter
451 * dak/check_overrides.py (main): Use case-insensitive comparing
454 2008-06-14 Joerg Jaspert <joerg@debian.org>
456 * scripts/debian/byhand-task: Merged patch from Frans Pop to
457 fail on byhand-task uploads if they do not go to unstable.
459 * config/debian/cron.weekly: Do a little git cleanup work too.
461 * config/debian/cron.buildd: Add batchmode and also
462 Connect/SetupTimeout parameters to ssh
464 * config/debian/cron.dinstall (POSTDUMP): Compress all
465 uncompressed psql backups
467 2008-06-08 Joerg Jaspert <joerg@debian.org>
469 * dak/process_unchecked.py (check_urgency): Lowercase urgency
470 before we (eventually) warn on it. Patch taken from Russ Allbery.
472 2008-06-01 Otavio Salvador <otavio@debian.org>
474 * daklib/queue.py (check_valid): allow debian-installer specific
475 sources to have 'debian-installer' section.
477 2008-05-28 Frans Pop <fjp@debian.org>
479 * add autobyhand support for task overrides (from tasksel)
481 2008-05-27 Joerg Jaspert <joerg@debian.org>
483 * config/debian/pseudo-packages.maintainers: Change ftp.debian.org
484 pseudopackage maintainer name.
486 2008-05-12 Joerg Jaspert <joerg@debian.org>
488 * dak/transitions.py: use yaml.dump instead of syck.dump, as syck
489 seems to have a bug in its dump(), causing it to write illegal entries
490 And also do this for load.
492 2008-05-10 Stephen Gran <sgran@debian.org>
493 * tools/debianqueued-0.9/debianqueued: First pass at a send_mail
494 implementation that sucks less
495 * Update debian/control to reflect new perl dependency
497 2008-05-09 Joerg Jaspert <joerg@debian.org>
499 * dak/override.py (main): substitute value in X-Debian-Package
502 * templates/override.bug-close: Add X-Debian-Package header
503 * templates/reject-proposed-updates.rejected: dito
504 * templates/queue.rejected: dito
505 * templates/process-unchecked.new: dito
506 * templates/process-unchecked.bug-nmu-fixed: dito
507 * templates/process-unchecked.bug-experimental-fixed: dito
508 * templates/process-unchecked.bug-close: dito
509 * templates/process-unchecked.announce: dito
510 * templates/process-unchecked.accepted: dito
511 * templates/process-new.prod: dito
512 * templates/process-accepted.unaccept: dito
513 * templates/process-accepted.install: dito
514 * templates/process-unchecked.override-disparity: dito
516 2008-05-08 Joerg Jaspert <joerg@debian.org>
518 * templates/override.bug-close: Add X-Debian header
519 * templates/rm.bug-close: dito
520 * templates/reject-proposed-updates.rejected: dito
521 * templates/queue.rejected: dito
522 * templates/process-unchecked.new: dito
523 * templates/process-unchecked.bug-nmu-fixed: dito
524 * templates/process-unchecked.bug-experimental-fixed: dito
525 * templates/process-unchecked.bug-close: dito
526 * templates/process-unchecked.announce: dito
527 * templates/process-unchecked.accepted: dito
528 * templates/process-new.prod: dito
529 * templates/process-accepted.unaccept: dito
530 * templates/process-accepted.install: dito
531 * templates/process-unchecked.override-disparity: dito, but also
532 mention that people should include the package lists with the
533 override disparities.
535 2008-05-06 Joerg Jaspert <joerg@debian.org>
537 * config/debian/cron.dinstall: Put the timestamp stuff into an own
538 function, call that from everywhere. Also change the timestamp
539 format to not be local dependent.
541 2008-05-05 Joerg Jaspert <joerg@debian.org>
543 * daklib/dak_exceptions.py (dakerrors): add TransitionsError
544 * dak/transitions.py: Use it, instead of the own definition
546 2008-05-05 Mark Hymers <mhy@debian.org>
548 * daklib/dak_exceptions.py: Add a default message and tidy up our string
551 2008-05-05 Joerg Jaspert <joerg@debian.org>
553 * daklib/dak_exceptions.py: New file, central place for all those
554 own exceptions dak may raise.
556 * daklib/utils.py: Use dak_exceptions and delete all those string
557 exception raising stuff, which is depcreated.
558 During that delete the unknown_hostname_exc, as it wasnt used.
560 * dak/import_archive.py: use the new Exception class
562 * dak/generate_releases.py: dito
563 * dak/queue_report.py: dito
564 * daklib/queue.py: dito
566 2008-05-04 Joerg Jaspert <joerg@debian.org>
568 * daklib/queue.py: Various pychecker cleanups
570 * dak/import_keyring.py: Remove unused daklib.logging and Logger
571 and add the actually used daklib/utils
573 * dak/examine_package.py: remove daklib.queue import, never used
575 * dak/check_proposed_updates.py: Import stuff from daklib as
576 "import daklib.foo as foo"
577 * dak/clean_proposed_updates.py: likewise
578 * dak/clean_queues.py: likewise
579 * dak/clean_suites.py: likewise
580 * dak/compare_suites.py: likewise
581 * dak/cruft_report.py: likewise
582 (get_suite_binaries): Seperated in own function, out of main. More
583 of main should be splitted. (Or well, cruft_report redesigned a
584 little, so its easier to run on multiple suites with differing tests)
586 * dak/examine_package.py: likewise
587 * dak/find_null_maintainers.py: likewise
588 * dak/generate_index_diffs.py: likewise
589 * dak/generate_releases.py: likewise
590 * dak/import_archive.py: likewise
591 * dak/import_ldap_fingerprints.py: likewise
592 * dak/import_users_from_passwd.py: likewise
593 * dak/init_db.py: likewise
594 * dak/init_dirs.py: likewise
595 * dak/ls.py: likewise
596 * dak/make_maintainers.py: likewise
597 * dak/make_overrides.py: likewise
598 * dak/make_suite_file_list.py: likewise
599 * dak/new_security_install.py: likewise
600 * dak/override.py: likewise
601 * dak/process_accepted.py: likewise
602 * dak/process_new.py: likewise
603 * dak/process_unchecked.py: likewise
604 * dak/rm.py: likewise
605 * dak/show_new.py: likewise
606 * dak/split_done.py: likewise
607 * dak/stats.py: likewise
608 * dak/transitions.py: likewise
610 * dak/check_archive.py (check_files_not_symlinks): Remove
611 long-time unused and commented code. Import stuff from daklib as
612 "import daklib.foo as foo"
614 2008-05-04 Thomas Viehmann <tv@beamnet.de>
616 * dak/process_unchecked.py (check_signed_by_key): cater for uid_email
617 None in sponsor notification
619 2008-05-03 Joerg Jaspert <joerg@debian.org>
621 * dak/examine_package.py: clean up pychecker warnings (merged with
622 Thomas changes to the NEW display)
624 2008-05-03 Mark Hymers <mhy@debian.org>
626 * dak/check_archive.py: clean up pychecker warnings
627 * dak/check_overrides.py: likewise
628 * dak/check_proposed_updates.py: likewise
629 * dak/clean_proposed_updates.py: likewise
630 * dak/clean_queues.py: likewise
631 * dak/control_overrides.py: likewise
632 * dak/control_suite.py: likewise
633 * dak/decode_dot_dak.py: likewise
634 * dak/examine_package.py: likewise
635 * dak/process_new.py: likewise
636 * dak/process_unchecked.py: likewise
637 * dak/queue_report.py: likewise
638 * dak/reject_proposed_updates.py: likewise
639 * dak/security_install.py: likewise
640 * dak/show_new.py: likewise
641 * dak/stats.py: likewise
642 * dak/symlink_dists.py: likewise
643 * dak/transitions.py: likewise
644 >>>>>>> sec-merge:ChangeLog
646 2008-05-03 Joerg Jaspert <joerg@debian.org>
648 * config/debian/cron.daily: Rename to
649 * config/debian/cron.dinstall: this, as its not really something run
650 daily for some time now. And while dinstall is an OLD name, its
651 recognized pretty well within Debian
652 Also add some more timing information
653 Do not allow automated [o-]p-u-new processing to break dinstall
655 2008-05-03 Thomas Viehmann <tv@beamnet.de>
657 * web/,web/style.css: add web dir and current style.css
659 * dak/examine_package.py, dak/show_new.py: improve NEW html pages,
660 based on mock-up by M. Ferrari.
661 remove Checksums-* from examine-package output
663 2008-05-03 Thomas Viehmann <tv@beamnet.de>
665 * dak/process_unchecked.py (check_hashes): Reject on error while
668 2008-05-02 Joerg Jaspert <joerg@debian.org>
670 * config/debian/pseudo-packages*: Removed listarchives, closes #468667
671 added wiki.debian.org (currently pointing to debian-www), closes #194206
672 added security-tracker, closes #436152
673 added release.debian.org, closes #451005
675 * config/debian/cron.buildd: Cleanup unreachable code. (If someone
676 still wants it - its in revision control...)
678 * config/debian/cron.daily: Modify call to update-ftpstats to only
679 use files log/2*, instead of log/*, so it ignores the new cron/
680 subdir. Makes sure it can't get confused, and is also safe for
681 nearly thousand years. If this code is really in use in year 3000,
682 im sure people can adjust it! :)
684 * config/debian/vars: Add logdir as a place for cronjob log output
686 * config/debian/cron.daily: Use a logfile and be more verbose of
688 Also moved the commented VACUUM ; VACUUM ANALYZE calls over to
690 * config/debian/cron.weekly: likewise,
691 ... and activate those calls again. Once a week, as an
692 additional safety bet to be sure the stuff does get run is ok,
693 even if we have autovacuum by default.
695 2008-05-02 Thomas Viehmann <tv@beamnet.de>
697 * dak/process_unchecked.py (check_hashes): fix typo in
698 checksum reject message.
700 2008-05-02 Joerg Jaspert <joerg@debian.org>
702 * config/debian/extensions.py: used reindent.py from the python
703 2.x source examples to get all dak code use the same indentation
704 style, no longer a mix of 4 spaces / 1 tab.
705 * dak/check_archive.py: likewise
706 * dak/check_overrides.py: likewise
707 * dak/check_proposed_updates.py: likewise
708 * dak/clean_proposed_updates.py: likewise
709 * dak/clean_queues.py: likewise
710 * dak/clean_suites.py: likewise
711 * dak/compare_suites.py: likewise
712 * dak/control_overrides.py: likewise
713 * dak/control_suite.py: likewise
714 * dak/cruft_report.py: likewise
715 * dak/dak.py: likewise
716 * dak/decode_dot_dak.py: likewise
717 * dak/examine_package.py: likewise
718 * dak/find_null_maintainers.py: likewise
719 * dak/generate_index_diffs.py: likewise
720 * dak/generate_releases.py: likewise
721 * dak/import_archive.py: likewise
722 * dak/import_keyring.py: likewise
723 * dak/import_ldap_fingerprints.py: likewise
724 * dak/import_users_from_passwd.py: likewise
725 * dak/init_db.py: likewise
726 * dak/init_dirs.py: likewise
727 * dak/ls.py: likewise
728 * dak/make_maintainers.py: likewise
729 * dak/make_overrides.py: likewise
730 * dak/make_suite_file_list.py: likewise
731 * dak/mirror_split.py: likewise
732 * dak/new_security_install.py: likewise
733 * dak/override.py: likewise
734 * dak/poolize.py: likewise
735 * dak/process_accepted.py: likewise
736 * dak/process_new.py: likewise
737 * dak/process_unchecked.py: likewise
738 * dak/queue_report.py: likewise
739 * dak/reject_proposed_updates.py: likewise
740 * dak/rm.py: likewise
741 * dak/security_install.py: likewise
742 * dak/show_new.py: likewise
743 * dak/split_done.py: likewise
744 * dak/stats.py: likewise
745 * dak/symlink_dists.py: likewise
746 * dak/test/001/test.py: likewise
747 * dak/test/002/test.py: likewise
748 * dak/transitions.py: likewise
749 * daklib/extensions.py: likewise
750 * daklib/logging.py: likewise
751 * daklib/queue.py: likewise
752 * daklib/utils.py: likewise
753 * scripts/debian/insert_missing_changedby.py: likewise
755 * dak/process_new.py (recheck): Make the path check more robust,
756 so we no longer have to keep process_new seperate trees between
757 security and normal archive.
759 2008-04-27 Joerg Jaspert <joerg@debian.org>
761 * dak/process_accepted.py (Urgency_Log.__init__): Warn if the
762 configured path does not exist or is not writeable by us. Use a
763 tmp path if so, so we do not lose the urgencies in such cases.
765 * config/debian/dak.conf: Changed path for UrgencyLog
766 Same for the ReleaseTransitions file
768 * config/debian/cron.daily: Notify qa user on merkel of dinstall
769 start, Remove the britney call
771 2008-04-26 Joerg Jaspert <joerg@debian.org>
773 * dak/process_new.py: Call end() whenever we try to leave by
776 * config/debian/cron.daily: Also report NBS in experimental
778 2008-04-25 Joerg Jaspert <joerg@debian.org>
780 * dak/cruft_report.py (main): Make it possible to look at
781 experimental too, especially NBS
783 * dak/split_done.py (main): Only move files into their subdirs if
784 they are older than 30 days. That enables us to run this script as
787 * config/debian/cron.weekly: Run dak split-done
789 2008-04-23 Thomas Viehmann <tviehmann@debian.org>
791 * dak/process_unchecked.py: add changes["sponsoremail"]
792 for sponsored uploads if desired
793 * daklib/queue.py: add changes["sponsoremail"] to
794 Subst["__MAINTAINER_TO__"] if present
795 * daklib/utils.py: add functions
796 is_email_alias to check which accounts allow email forwarding,
797 which_alias_file to find the alias file, and
798 gpg_get_key_addresses to find uid addresses for a given
801 2008-04-22 Joerg Jaspert <joerg@debian.org>
803 * setup/init_pool.sql: added a function/aggregate for the release
804 team to base some script on it.
806 * config/debian/cron.daily: push katie@merkel to immediately start
807 the sync of projectb there.
809 2008-04-21 Joerg Jaspert <joerg@debian.org>
811 * scripts/debian/expire_dumps: New script, expires old database
812 dumps, using a scheme to keep more of the recent dumps.
814 * config/debian/cron.daily: Use the new script. Also - compress
815 all files older than 7 days, instead of 30.
817 * dak/process_accepted.py (install): Do not break if a
818 source/maintainer combination is already in src_uploaders, "just"
821 2008-04-20 Thomas Viehmann <tviehmann@debian.org>
823 * daklib/utils.py (build_file_list): Deal with "Format 3 style"
824 Format lines (ie. those having extra text appended).
826 2008-04-19 Joerg Jaspert <joerg@debian.org>
828 * dak/process_unchecked.py (check_files): Sanity check the
829 provides field, which closes #472783
831 2008-04-18 Joerg Jaspert <joerg@debian.org>
833 * config/debian/dak.conf: Add mapping stable-proposed-updates
836 * dak/transitions.py (load_transitions): Additionally check for
837 invalid package list indentation
839 2008-04-17 Joerg Jaspert <joerg@debian.org>
841 * config/debian/dak.conf: Add TempPath statement for the Release
844 * dak/transitions.py (temp_transitions_file): Use the TempPath
845 (write_transitions_from_file): Check if the file we should get our
846 transitions from is in our TempPath, error out if it isnt
847 (main): Check for TempPath existance
849 2008-04-12 James Troup <troup@debian.org>
851 * dak/clean_proposed_updates.py: add support for -s/--suite and
854 2008-04-11 Anthony Towns <ajt@debian.org>
856 * dak/utils.py: build_file_list() extra parameters so it can
857 build a file list for checksums-foo fields. Don't use float() to
858 compare formats, because Format: 1.10 should compare greater than
859 Format: 1.9 (use "1.9".split(".",1) and tuple comparison instead)
861 * dak/process_unchecked.py: check_md5sum becomes check_hashes
862 and check_hash. If changes format is 1.8 or later, also check
863 checksums-sha1 and checksums-sha256 for both .changes and .dsc,
864 and reject on presence/absence of un/expected checksums-* fields.
866 2008-04-07 Joerg Jaspert <joerg@debian.org>
868 * daklib/utils.py (build_file_list): Check for dpkg .changes
869 adjusted to reject newer (and right now broken) 1.8 version, until
870 dpkg (or debsign) is fixed and doesn't produce invalid .changes anymore
872 2008-03-22 Joerg Jaspert <joerg@debian.org>
874 * dak/transitions.py (load_transitions): Check if all our keys are
875 defined, if there are only keys defined we want and also the types
878 2008-03-22 Anthony Towns <ajt@debian.org>
880 * dak/edit_transitions.py: Add --import option.
881 Add --use-sudo option. Use fcntl locking for writing.
882 Move writing into a function (write_transitions).
883 Reinvoke self using sudo and --import if necessary.
884 Move temporary file creation into a function, use mkstemp.
885 Rename to "dak transitions".
887 2008-03-21 Joerg Jaspert <joerg@debian.org>
889 * dak/edit_transitions.py (edit_transitions): Use sudo to copy the
890 edited file back in place
891 (check_transitions): Use proper locking and also use sudo to copy
892 the new file in place
894 2008-03-21 Anthony Towns <ajt@debian.org>
896 * config/debian/extensions.py: Add infrastructure for replacing
897 functions in dak modules; add upload blocking for dpkg.
899 2008-03-12 Joerg Jaspert <joerg@debian.org>
901 * dak/edit_transitions.py: Done a number of cleanups to make code
902 working. Also changed the way prompting/answering goes, to not
903 have to import daklib/queue.
904 (edit_transitions): When done with a successful edit - also print
905 a final overview about defined transitions
907 2008-03-11 Joerg Jaspert <joerg@debian.org>
909 * dak/process_unchecked.py: Import syck module directly, not "from
911 (check_transition): Do the check for sourceful upload in here
912 Also adjust the syck loading commands, rename new_vers to
913 expected, curvers to current, to make it more clear what they mean.
915 * daklib/database.py (get_suite_version): Renamed from
916 get_testing_version. Also changed the cache variables name
918 * The above changes are based on modifications from Anthony.
920 * dak/dak.py (init): Renamed check -> edit transitions
922 * dak/edit_transitions.py: Renamed from check_transitions.py
923 (main): Also rename new_vers/curvers to expected/current
924 Basically a nice rewrite, so it now does checks and edit,
925 depending on how you call it. Check also removes old transitions,
928 2008-03-02 Joerg Jaspert <joerg@debian.org>
930 * debian/control (Suggests): Add python-syck to Depends:
932 * dak/dak.py (init): Tell it about check_transitions
934 * dak/check_transitions.py (usage): Added, checks the transitions
937 * daklib/database.py (get_testing_version): Added. Returns the
938 version for the source in testing, if any
940 * dak/process_unchecked.py (check_transition): Added. Checks if a
941 release team member defined a transition, and rejects based on
943 (process_it): Use it.
944 (check_transition): Warn on broken transitions file and return,
946 (check_transition): Moved out of here, into daklib/queue
947 (process_it): Call check_transitions only if
948 changes[architecture] has source included.
949 (check_transition): Now call the database.get_testing_version
951 2008-02-09 Christoph Berg <myon@debian.org>
953 * daklib/queue.py (get_type): fubar does not exist in global
956 * setup/add_constraints.sql setup/init_pool.sql: Add changedby column
957 to source table, and move src_uploaders after source so the REFERNCES
959 * dak/process_accepted.py (install): Fill the changedby column from
960 the information found in the .changes. This will allow to identify
961 NMUs and sponsored uploads more precisely in tools querying projectb.
962 * scripts/debian/insert_missing_changedby.py: Script to import yet
963 missing fields from filippo's uploads-history DB.
965 2008-02-06 Joerg Jaspert <joerg@debian.org>
967 * daklib/utils.py (check_signature): Make variable key available,
970 2008-01-07 Joerg Jaspert <joerg@debian.org>
972 * dak/examine_package.py (check_deb): Remove linda call. It
973 provides no added benefit to lintian anymore.
975 2008-01-07 Joerg Jaspert <joerg@debian.org>
977 * dak/examine_package.py (check_deb): Remove linda call. It
978 provides no added benefit to lintian anymore.
980 2008-01-06 Joerg Jaspert <joerg@debian.org>
982 * dak/examine_package.py (do_lintian): lintian now supports html
984 (do_command): Dont escape html chars if param escaped = 1
986 2008-01-06 Joerg Jaspert <joerg@debian.org>
988 * dak/examine_package.py (do_lintian): lintian now supports html
990 (do_command): Dont escape html chars if param escaped = 1
992 2007-12-31 Anthony Towns <ajt@debian.org>
994 * dak/process_new.py (recheck): pass "" for prefix_str to reject()
995 when processing result of check_dsc_against_db so we don't promote
996 warnings to rejections.
998 2007-12-31 Anthony Towns <ajt@debian.org>
1000 * dak/process_new.py (recheck): pass "" for prefix_str to reject()
1001 when processing result of check_dsc_against_db so we don't promote
1002 warnings to rejections.
1004 2007-12-30 Joerg Jaspert <joerg@debian.org>
1006 * dak/dak.py (init): add show-new. This is based on a patch
1007 submitted by Thomas Viehmann in Bug #408318, but large parts of
1008 handling it are rewritten and show-new is done by me.
1010 * dak/queue_report.py (table_row): Add link to generated html page
1013 * dak/show_new.py: new file, generates html overview for NEW
1014 packages, similar to what we see with examine-package.
1016 * config/debian/cron.hourly: Add show-new call
1018 * config/debian/dak.conf: Add HTMLPath for Show-New
1020 * dak/examine_package.py (print_copyright): ignore stderr when
1021 finding copyright file.
1022 (main): add html option
1023 (html_escape): new function
1024 (escape_if_needed): ditto
1026 (colour_output): ditto
1027 (print_escaped_text): ditto
1028 (print_formatted_text): ditto
1029 - use those functions everywhere where we generate output, as they
1030 easily know if we want html or not and just DTRT
1031 (do_lintian): new function
1033 (output_deb_info): Use print_escaped_text, not print_formatted_text.
1034 Also import daklib.queue, determine_new now lives there
1036 Also add a variable to see if we want html output. Default is
1037 disabled, show_new enables it for its use.
1038 Most of html, besides header/footer are in examine_package instead
1039 of show_new, as it makes it a whole lot easier to deal with it at
1040 the point the info is generated.
1043 * dak/process_new.py (determine_new): Moved out of here.
1044 (check_valid): Moved out of here.
1045 (get_type): Moved out of here.
1047 * daklib/queue.py (determine_new): Moved here.
1048 (check_valid): Moved here.
1049 (get_type): Moved here.
1051 * dak/init_db.py (do_section): Remove non-US code
1053 * dak/make_overrides.py (main): ditto
1055 * dak/process_new.py (determine_new): ditto
1057 * daklib/queue.py (Upload.in_override_p),
1058 (Upload.check_override): ditto
1060 * daklib/utils.py (extract_component_from_section):,
1063 * dak/import_archive.py (update_section): ditto
1065 * dak/symlink_dists.py (fix_component_section): ditto
1067 * scripts/debian/mkmaintainers: ditto
1069 * scripts/debian/update-mirrorlists (masterlist): ditto
1071 * config/debian-non-US/*: Remove subdir
1073 * scripts/debian/update-readmenonus: Removed.
1076 2007-12-30 Joerg Jaspert <joerg@debian.org>
1078 * dak/dak.py (init): add show-new. This is based on a patch
1079 submitted by Thomas Viehmann in Bug #408318, but large parts of
1080 handling it are rewritten and show-new is done by me.
1082 * dak/queue_report.py (table_row): Add link to generated html page
1085 * dak/show_new.py: new file, generates html overview for NEW
1086 packages, similar to what we see with examine-package.
1088 * config/debian/cron.hourly: Add show-new call
1090 * config/debian/dak.conf: Add HTMLPath for Show-New
1092 * dak/examine_package.py (print_copyright): ignore stderr when
1093 finding copyright file.
1094 (main): add html option
1095 (html_escape): new function
1096 (escape_if_needed): ditto
1098 (colour_output): ditto
1099 (print_escaped_text): ditto
1100 (print_formatted_text): ditto
1101 - use those functions everywhere where we generate output, as they
1102 easily know if we want html or not and just DTRT
1103 (do_lintian): new function
1105 (output_deb_info): Use print_escaped_text, not print_formatted_text.
1106 Also import daklib.queue, determine_new now lives there
1108 Also add a variable to see if we want html output. Default is
1109 disabled, show_new enables it for its use.
1110 Most of html, besides header/footer are in examine_package instead
1111 of show_new, as it makes it a whole lot easier to deal with it at
1112 the point the info is generated.
1115 * dak/process_new.py (determine_new): Moved out of here.
1116 (check_valid): Moved out of here.
1117 (get_type): Moved out of here.
1119 * daklib/queue.py (determine_new): Moved here.
1120 (check_valid): Moved here.
1121 (get_type): Moved here.
1123 * dak/init_db.py (do_section): Remove non-US code
1125 * dak/make_overrides.py (main): ditto
1127 * dak/process_new.py (determine_new): ditto
1129 * daklib/queue.py (Upload.in_override_p),
1130 (Upload.check_override): ditto
1132 * daklib/utils.py (extract_component_from_section):,
1135 * dak/import_archive.py (update_section): ditto
1137 * dak/symlink_dists.py (fix_component_section): ditto
1139 * scripts/debian/mkmaintainers: ditto
1141 * scripts/debian/update-mirrorlists (masterlist): ditto
1143 * config/debian-non-US/*: Remove subdir
1145 * scripts/debian/update-readmenonus: Removed.
1148 2007-12-28 Anthony Towns <ajt@debian.org>
1150 * daklib/utils.py (check_signature): add NOTATION_DATA and
1151 NOTATION_NAME to known keywords.
1153 * daklib/queue.py (Upload.check_source_against_db):
1155 * dak/make_suite_file_list.py: add -f/--force option.
1157 * dak/generate_releases.py: add -a/--apt-conf=FILE and
1158 -f/--force-touch options. Pull version info from the database.
1159 Make suite description optional.
1161 * config/debian/dak.conf: update
1162 Reject-Proposed-Updates::MoreInfoURL. Comment out
1163 Suite::Stable::Version and ::Description.
1165 * config/debian/apt.conf: Add hurd-i386 to unstable
1166 debian-installer stanza.
1168 2007-12-28 Joerg Jaspert <joerg@debian.org>
1170 * KEYEXPIRED is actually a known keyword. We do check it earlier
1171 on and reject in case the sig is bad (or unknown)
1173 2007-12-28 Anthony Towns <ajt@debian.org>
1175 * daklib/utils.py (check_signature): add NOTATION_DATA and
1176 NOTATION_NAME to known keywords.
1178 * daklib/queue.py (Upload.check_source_against_db):
1180 * dak/make_suite_file_list.py: add -f/--force option.
1182 * dak/generate_releases.py: add -a/--apt-conf=FILE and
1183 -f/--force-touch options. Pull version info from the database.
1184 Make suite description optional.
1186 * config/debian/dak.conf: update
1187 Reject-Proposed-Updates::MoreInfoURL. Comment out
1188 Suite::Stable::Version and ::Description.
1190 * config/debian/apt.conf: Add hurd-i386 to unstable
1191 debian-installer stanza.
1193 2007-12-28 Joerg Jaspert <joerg@debian.org>
1195 * KEYEXPIRED is actually a known keyword. We do check it earlier
1196 on and reject in case the sig is bad (or unknown)
1198 2007-12-24 Joerg Jaspert <joerg@debian.org>
1200 * Also run lintian on the .dsc file to check the source itself.
1202 * Fix the direct usage of ar | tar etc to get the copyright file
1203 and use dpkg-deb, which is made for this and makes us able to
1204 process data.tar.bz2 (or whatever format it will be in the
1207 2007-12-24 Joerg Jaspert <joerg@debian.org>
1209 * Also run lintian on the .dsc file to check the source itself.
1211 * Fix the direct usage of ar | tar etc to get the copyright file
1212 and use dpkg-deb, which is made for this and makes us able to
1213 process data.tar.bz2 (or whatever format it will be in the
1216 2007-12-21 Joerg Jaspert <joerg@debian.org>
1218 * Remove the (now useless) check for a pre-depends on dpkg for
1219 binaries that contain bzip2 compressed data tarballs.
1221 2007-12-21 Joerg Jaspert <joerg@debian.org>
1223 * Remove the (now useless) check for a pre-depends on dpkg for
1224 binaries that contain bzip2 compressed data tarballs.
1226 2007-08-28 Anthony Towns <ajt@debian.org>
1228 * process_unchecked.py: Add support for automatic BYHAND
1230 * config/debian/dak.conf, scripts/debian/byhand-tag: Automatic
1231 processing of tag-overrides.
1232 * examine_package.py: Summarise duplicate copyright file entries
1233 (same md5sum) with a reference to the previous instance, rather
1234 than repeating them.
1235 * process_new.py: When rejecting from the p-u-new or o-p-u-new
1236 holding queues, don't worry if dak has its own reasons for
1237 rejecting the package as well as the SRMs.
1239 2007-08-28 Anthony Towns <ajt@debian.org>
1241 * process_unchecked.py: Add support for automatic BYHAND
1243 * config/debian/dak.conf, scripts/debian/byhand-tag: Automatic
1244 processing of tag-overrides.
1245 * examine_package.py: Summarise duplicate copyright file entries
1246 (same md5sum) with a reference to the previous instance, rather
1247 than repeating them.
1248 * process_new.py: When rejecting from the p-u-new or o-p-u-new
1249 holding queues, don't worry if dak has its own reasons for
1250 rejecting the package as well as the SRMs.
1252 2007-06-19 Anthony Towns <ajt@debian.org>
1254 * Add nm.debian.org pseudopackage
1256 2007-06-19 Anthony Towns <ajt@debian.org>
1258 * Add nm.debian.org pseudopackage
1260 2007-06-18 Anthony Towns <ajt@debian.org>
1262 * daklib/logging.py: Set umask to not exclude group-writability
1263 so we don't get reminded at the start of each month. Thanks to
1265 * dak/override.py: More changes from Herr von Wifflepuck: warn
1266 if section of source is different to binary section; restore
1267 functionality on source-only overrides; croak if trying to set
1268 priority of a source override; never set priority of source
1269 overrides; correct typo in logging (s/priority/section/ at
1272 * config/debian/apt.conf.oldstable: Added for oldstable point releases.
1273 * config/debian/cron.daily: auotmatically accept/reject
1274 oldstable-proposed-updates based on COMMENTS directory
1276 2007-06-18 Anthony Towns <ajt@debian.org>
1278 * config/debian/apt.conf, config/debian/apt.conf.stable,
1279 config/debian/dak.conf: update for 4.0r0 (etch), and 3.1r6
1280 (sarge), support for oldstable-proposed-updates, dropping m68k
1281 from etch, creating etch-m68k suite, creating lenny.
1283 * config/debian/vars: update for lenny
1285 * config/debian/dak.conf: typo fix for Dinstall::GPGKeyring,
1286 drop upload limitations, add release postgres user
1288 * dak/process_new.py: support for automatically accepting and rejecting
1289 packages from proposed-updates holding queues via COMMENTS directory
1290 * cron.daily: automatically process COMMENTS-based approvals
1291 and rejections for proposed-updates holding queues
1293 * dak/process_unchecked.py: add support for oldproposedupdates
1296 * dak/control_suite.py: allow control-suite to work with etch-m68k
1298 * dak/generate_releases.py: unlink old Release files before updating
1299 them if nlinks > 1 (ie, if two files used to be the same, maybe they
1300 shouldn't be when generate-releases is run)
1302 * dak/generate_releases.py: add a couple of commented lines to make
1303 it easier to deal with point releases
1305 * dak/make_overrides.py: generate overrides for !contrib udebs
1307 * docs/README.stable-point-release: update docs for doing a
1310 2007-06-18 Anthony Towns <ajt@debian.org>
1312 * daklib/logging.py: Set umask to not exclude group-writability
1313 so we don't get reminded at the start of each month. Thanks to
1315 * dak/override.py: More changes from Herr von Wifflepuck: warn
1316 if section of source is different to binary section; restore
1317 functionality on source-only overrides; croak if trying to set
1318 priority of a source override; never set priority of source
1319 overrides; correct typo in logging (s/priority/section/ at
1322 * config/debian/apt.conf.oldstable: Added for oldstable point releases.
1323 * config/debian/cron.daily: auotmatically accept/reject
1324 oldstable-proposed-updates based on COMMENTS directory
1326 2007-06-18 Anthony Towns <ajt@debian.org>
1328 * config/debian/apt.conf, config/debian/apt.conf.stable,
1329 config/debian/dak.conf: update for 4.0r0 (etch), and 3.1r6
1330 (sarge), support for oldstable-proposed-updates, dropping m68k
1331 from etch, creating etch-m68k suite, creating lenny.
1333 * config/debian/vars: update for lenny
1335 * config/debian/dak.conf: typo fix for Dinstall::GPGKeyring,
1336 drop upload limitations, add release postgres user
1338 * dak/process_new.py: support for automatically accepting and rejecting
1339 packages from proposed-updates holding queues via COMMENTS directory
1340 * cron.daily: automatically process COMMENTS-based approvals
1341 and rejections for proposed-updates holding queues
1343 * dak/process_unchecked.py: add support for oldproposedupdates
1346 * dak/control_suite.py: allow control-suite to work with etch-m68k
1348 * dak/generate_releases.py: unlink old Release files before updating
1349 them if nlinks > 1 (ie, if two files used to be the same, maybe they
1350 shouldn't be when generate-releases is run)
1352 * dak/generate_releases.py: add a couple of commented lines to make
1353 it easier to deal with point releases
1355 * dak/make_overrides.py: generate overrides for !contrib udebs
1357 * docs/README.stable-point-release: update docs for doing a
1360 2007-03-05 Anthony Towns <ajt@debian.org>
1362 * config/debian/dak.conf: update for 3.1r5.
1363 * scripts/debian/ssh-move: add ssh-move script from debbugs
1364 * config/debian/cron.unchecked: push version info to debbugs using
1367 2007-03-05 Anthony Towns <ajt@debian.org>
1369 * config/debian/dak.conf: update for 3.1r5.
1370 * scripts/debian/ssh-move: add ssh-move script from debbugs
1371 * config/debian/cron.unchecked: push version info to debbugs using
1374 2007-02-14 James Troup <troup@ries.debian.org>
1376 * docs/README.config: remove Dinstall::GroupOverrideFilename.
1377 * config/debian/dak.conf: likewise.
1378 * config/debian-non-US/dak.conf: likewise.
1379 * config/debian-security/dak.conf: likewise.
1381 * daklib/queue.py (Upload.close_bugs): no longer handle NMUs or
1382 experimental differently, just close the bugs and let version
1383 tracking sort it out.
1384 (nmu_p): remove entire class - now unused.
1385 (Upload.__init__): don't use nmu_p.
1387 2007-02-14 James Troup <troup@ries.debian.org>
1389 * docs/README.config: remove Dinstall::GroupOverrideFilename.
1390 * config/debian/dak.conf: likewise.
1391 * config/debian-non-US/dak.conf: likewise.
1392 * config/debian-security/dak.conf: likewise.
1394 * daklib/queue.py (Upload.close_bugs): no longer handle NMUs or
1395 experimental differently, just close the bugs and let version
1396 tracking sort it out.
1397 (nmu_p): remove entire class - now unused.
1398 (Upload.__init__): don't use nmu_p.
1400 2007-02-08 Anthony Towns <ajt@debian.org>
1402 * config/debian/dak.conf: update for 3.1r4. Use new 'etch'
1403 signing key. Drop maximum index diffs down to 14.
1405 * config/debian/apt.conf: add udeb support for non-free (testing,
1406 unstable) and experimental.
1407 * config/debian/dak.conf: likewise.
1409 * dak/generate_releases.py (main): handle udebs in any component.
1411 * daklib/queue.py (Upload.build_summaries): handle files without a
1414 * dak/generate_releases.py (print_sha256_files): new function.
1417 * dak/process_accepted.py (stable_install): fix name of template
1420 * dak/process_unchecked.py (is_stableupdate): fix invocation of
1421 database.get_suite_id().
1423 * templates/process-new.bxa_notification: Update on request
1424 of/after discussion with BIS staff.
1426 * scripts/debian/mkfilesindices: also handle proposed-updates.
1428 2007-02-08 Ryan Murray <rmurray@debian.org>
1430 * config/debian/cron.monthly: use $ftpgroup instead of hardcoding
1431 group name for chgrp of mail archives.
1433 * daklib/queue.py (Upload.check_dsc_against_db): handle multiple
1434 orig.tar.gz's by picking the first one by file id.
1436 * dak/override.py (main): limit to binary overrides only for now.
1437 (usage): update to match.
1439 * config/debian/cron.daily: track when we have the accepted lock
1440 and clean it up on exit if we have it. Take/check the
1441 cron.unchecked lock just before traping to cleanup on exit.
1442 Remove potato override handling. Remove any dangling symlinks in
1443 /srv/incoming.d.o/buildd. Clean up apt-ftparchive's databases.
1445 * config/debian/apt.conf: change default compression scheme for
1446 both Sources and Packages to gzip and bzip2 rather than
1447 uncompressed and gzip (Packages) and gzip (Sources). Use old
1448 defaults for proposed-updates.
1450 * dak/control_overrides.py (main): refuse to operate on
1453 * config/debian/pseudo-packages.maintainers: drop install,
1454 installation, boot-floppy, slink-cd, potato-cd and
1455 nonus.debian.org. Update base.
1456 * config/debian/pseudo-packages.description: likewise.
1458 * daklib/utils.py (re_srchasver): new regex.
1459 (parse_changes): use regex to split 'Source (Version)' style
1460 Source fields into 'source' and 'source-version'.
1462 * config/debian/cron.daily: use $base instead of hardcoding path
1465 * scripts/debian/mkfilesindices: source 'vars' file and use it's
1466 variables instead of hardcoding path names.
1468 * config/debian/apt.conf: switch from /org to /srv.
1469 * config/debian/apt.conf.buildd: likewise.
1470 * config/debian/apt.conf.stable: likewise.
1471 * config/debian/cron.daily: likewise.
1472 * config/debian/cron.hourly: likewise.
1473 * config/debian/cron.monthly: likewise.
1474 * config/debian/cron.unchecked: likewise.
1475 * config/debian/cron.weekly: likewise.
1476 * config/debian/dak.conf: likewise.
1477 * config/debian/vars: likewise.
1478 * scripts/debian/mkfilesindices: likewise.
1480 2007-02-08 James Troup <james@nocrew.org>
1482 * dak/process_unchecked.py (check_signed_by_key): new function to
1483 ensure .changes files are signed by an authorized uploader.
1484 (process_it): use it.
1486 * config/debian/dak.conf (Binary-Upload-Restrictions): new stanza
1487 to configure per suite/component/architecture binary upload
1490 2007-02-08 Anthony Towns <ajt@debian.org>
1492 * config/debian/dak.conf: update for 3.1r4. Use new 'etch'
1493 signing key. Drop maximum index diffs down to 14.
1495 * config/debian/apt.conf: add udeb support for non-free (testing,
1496 unstable) and experimental.
1497 * config/debian/dak.conf: likewise.
1499 * dak/generate_releases.py (main): handle udebs in any component.
1501 * daklib/queue.py (Upload.build_summaries): handle files without a
1504 * dak/generate_releases.py (print_sha256_files): new function.
1507 * dak/process_accepted.py (stable_install): fix name of template
1510 * dak/process_unchecked.py (is_stableupdate): fix invocation of
1511 database.get_suite_id().
1513 * templates/process-new.bxa_notification: Update on request
1514 of/after discussion with BIS staff.
1516 * scripts/debian/mkfilesindices: also handle proposed-updates.
1518 2007-02-08 Ryan Murray <rmurray@debian.org>
1520 * config/debian/cron.monthly: use $ftpgroup instead of hardcoding
1521 group name for chgrp of mail archives.
1523 * daklib/queue.py (Upload.check_dsc_against_db): handle multiple
1524 orig.tar.gz's by picking the first one by file id.
1526 * dak/override.py (main): limit to binary overrides only for now.
1527 (usage): update to match.
1529 * config/debian/cron.daily: track when we have the accepted lock
1530 and clean it up on exit if we have it. Take/check the
1531 cron.unchecked lock just before traping to cleanup on exit.
1532 Remove potato override handling. Remove any dangling symlinks in
1533 /srv/incoming.d.o/buildd. Clean up apt-ftparchive's databases.
1535 * config/debian/apt.conf: change default compression scheme for
1536 both Sources and Packages to gzip and bzip2 rather than
1537 uncompressed and gzip (Packages) and gzip (Sources). Use old
1538 defaults for proposed-updates.
1540 * dak/control_overrides.py (main): refuse to operate on
1543 * config/debian/pseudo-packages.maintainers: drop install,
1544 installation, boot-floppy, slink-cd, potato-cd and
1545 nonus.debian.org. Update base.
1546 * config/debian/pseudo-packages.description: likewise.
1548 * daklib/utils.py (re_srchasver): new regex.
1549 (parse_changes): use regex to split 'Source (Version)' style
1550 Source fields into 'source' and 'source-version'.
1552 * config/debian/cron.daily: use $base instead of hardcoding path
1555 * scripts/debian/mkfilesindices: source 'vars' file and use it's
1556 variables instead of hardcoding path names.
1558 * config/debian/apt.conf: switch from /org to /srv.
1559 * config/debian/apt.conf.buildd: likewise.
1560 * config/debian/apt.conf.stable: likewise.
1561 * config/debian/cron.daily: likewise.
1562 * config/debian/cron.hourly: likewise.
1563 * config/debian/cron.monthly: likewise.
1564 * config/debian/cron.unchecked: likewise.
1565 * config/debian/cron.weekly: likewise.
1566 * config/debian/dak.conf: likewise.
1567 * config/debian/vars: likewise.
1568 * scripts/debian/mkfilesindices: likewise.
1570 2007-02-08 James Troup <james@nocrew.org>
1572 * dak/process_unchecked.py (check_signed_by_key): new function to
1573 ensure .changes files are signed by an authorized uploader.
1574 (process_it): use it.
1576 * config/debian/dak.conf (Binary-Upload-Restrictions): new stanza
1577 to configure per suite/component/architecture binary upload
1580 2006-10-09 James Troup <james.troup@canonical.com>
1582 * dak/process_unchecked.py (check_timestamps): change match to
1583 search as recent versions of python-apt prefix the string with 'E: '.
1585 2006-10-09 James Troup <james.troup@canonical.com>
1587 * dak/process_unchecked.py (check_timestamps): change match to
1588 search as recent versions of python-apt prefix the string with 'E: '.
1590 2006-06-26 Ryan Murray <rmurray@debian.org>
1592 * dak/process_unchecked.py (check_files): strip optional source version
1593 from Source: field in changes file, and ensure what is left is a valid
1596 2006-06-26 Ryan Murray <rmurray@debian.org>
1598 * dak/process_unchecked.py (check_files): strip optional source version
1599 from Source: field in changes file, and ensure what is left is a valid
1602 2006-06-23 Ryan Murray <rmurray@debian.org>
1604 * dak/process_unchecked.py (check_files): also check ProposedUpdates
1607 2006-06-23 Ryan Murray <rmurray@debian.org>
1609 * dak/process_unchecked.py (check_files): also check ProposedUpdates
1612 2006-06-18 Ryan Murray <rmurray@debian.org>
1614 * dak/scripts/debian/update-ftpstats: look for dak named processes in
1617 * dak/process_unchecked.py (check_files): only check embargoed and
1618 unembargoed queues if the keys are set.
1620 * dak/config/debian-security/apt.conf: set Packages::Compress to gzip
1623 2006-06-18 Ryan Murray <rmurray@debian.org>
1625 * dak/scripts/debian/update-ftpstats: look for dak named processes in
1628 * dak/process_unchecked.py (check_files): only check embargoed and
1629 unembargoed queues if the keys are set.
1631 * dak/config/debian-security/apt.conf: set Packages::Compress to gzip
1634 2006-06-16 James Troup <james@nocrew.org>
1636 * dak/dak.py (init): add new-security-install.
1638 * dak/new_security_install.py: cleanups and adapt for new naming
1639 scheme and other changes.
1641 2006-06-16 Anthony Towns <ajt@debian.org>
1643 * dak/new_security_install.py: initial version imported from
1646 2006-06-16 James Troup <james@nocrew.org>
1648 [Merged changes from klecker - original author unknown.]
1650 * daklib/queue.py (Upload.dump_vars): also save changes["adv id"].
1652 * dak/security_install.py (do_upload): fix check for oldstable and
1653 upload file list handling.
1655 * dak/process_unchecked.py (check_files): update "check for
1656 source" code to also look in Embargoed and Unembargoed queues.
1657 (is_unembargo): fix handling of Dir::Queue::Disembargo.
1659 * dak/decode_dot_dak.py (main): add support for changes["adv id"].
1661 * config/debian-security/vars (disembargo): add.
1663 * config/debian-security/dak.conf (Dinstall::SigningKeyIds):
1665 (Process-Unchecked::AcceptedLockFile): add.
1666 (Suite::Testing): clean up Version and Description.
1667 (SuiteMappings): add silent map from etch-secure to testing.
1669 * config/debian-security/cron.unchecked: add support for
1670 disembargoed queues.
1672 * config/debian-security/apt.conf.buildd: add bzip2ed Packages
1675 * config/debian-security/apt.conf: add amd64 to architectures for
1678 2006-06-11 James Troup <troup@spohr.debian.org>
1680 * config/debian/cron.daily: invoke process-accepted not
1683 * config/debian/vars (scriptsdir): new variable.
1684 * config/debian/cron.daily: use it.
1686 * scripts/debian/mkmaintainers: put Maintainers_Versions-non-US in
1687 $base/misc/ instead of versioned $masterdir. Correct 'dak
1688 make-maintainers' invocation to look in $configdir for
1689 pseudo-packages.maintainers.
1691 * daklib/queue.py (Upload.do_reject): use correct name for
1694 2006-06-11 James Troup <james@nocrew.org>
1696 * dak/override.py (main): temporarily add content of old X-Katie
1697 header back as the PTS apparently filters on it.
1698 * dak/process_accepted.py (main): likewise.
1699 * dak/process_new.py (main): likewise.
1700 * dak/process_unchecked.py (main): likewise.
1701 * dak/reject_proposed_updates.py (main): likewise.
1702 * dak/rm.py (main): likewise.
1703 * daklib/queue.py (Upload.do_reject): likewise.
1705 * config/debian/cron.unchecked: set -u to error out on undefined
1706 variables. Preset LOCKDAILY to "" accordingly.
1707 * config/debian/cron.hourly: likewise.
1708 * config/debian/cron.monthly: likewise.
1709 * config/debian/cron.weekly: likewise.
1711 * config/debian/vars (configdir): add new variable pointing to
1714 * config/debian/cron.daily: use $configdir inplace of $masterdir
1715 when that's what we mean, and don't cd into $masterdir just to run
1716 dak scripts as we don't need to do that anymore.
1717 * config/debian/cron.hourly: likewise.
1718 * config/debian/cron.unchecked: likewise.
1719 * config/debian/cron.weekly: likewise.
1721 * config/debian/dak.conf
1722 (Import-Users-From-Passwd::KnownPostgres): temporarily add 'katie'
1723 user back to list of known users as it's non-trivial to entirely
1724 change the owner of a database with postgresql 7.4.
1726 * daklib/queue.py (Upload.source_exists): use string object
1727 methods rather than string module.
1728 (Upload.get_anyversion): likewise.
1730 * daklib/utils.py (validate_changes_file_arg): update filename
1731 slicing to cope with new .dak filenames.
1733 * dak/ls.py (main): add back 'heidi' as a valid argument for
1734 -f/--format as people are using it in scripts and breaking that
1735 without warning seems rude.
1737 2006-05-21 James Troup <james@nocrew.org>
1739 * dak/rm.py (main): use string .isdigit() rather than
1741 * dak/process_new.py (edit_overrides): likewise.
1743 * daklib/utils.py (str_isnum): removed accordingly. Also drop
1746 2006-05-21 James Troup <james@nocrew.org>
1748 * dak/check_archive.py (check_indices_files_exist): use list
1749 comprehension instead of map(). No longer need to import
1750 deprecated string module as a side-effect.
1751 * dak/check_overrides.py (process): likewise.
1753 * dak/cruft_report.py (do_obsolete_source): likewise.
1755 * dak/ls.py (main): likewise.
1756 * dak/make_suite_file_list.py (write_filelists): likewise.
1757 * dak/process_accepted.py (stable_install): likewise.
1758 * dak/rm.py (main): likewise.
1759 * dak/stats.py (number_of_packages): likewise.
1760 * daklib/logging.py (Logger.log): likewise.
1761 * daklib/queue.py (Upload.source_exists): likewise.
1762 (Upload.cross_suite_version_check): likewise.
1763 * daklib/utils.py (parse_args): likewise.
1765 2006-05-21 James Troup <james@nocrew.org>
1767 * daklib/utils.py (process_gpgv_output): new function, split out
1768 of check_signature().
1769 (check_signature): adapt accordingly.
1770 (retrieve_key): new function that will try to retrieve the key
1771 that signed a given file from a keyserver.
1772 (check_signature): add 'autofetch' argument that if not set
1773 defaults to the value of Dinstall::KeyAutoFetch (if that exists).
1774 If 'autofetch' is true, invoke retrieve_key().
1776 * docs/README.config: document Dinstall::KeyAutoFetch and
1779 2006-05-20 James Troup <james@nocrew.org>
1781 * dak/find_null_maintainers.py (main):
1782 s/createtimestamp/createTimestamp/ to make things work with modern
1785 * config/debian/dak.conf: Update StableRejector, MoreInfoURL,
1786 Stable::Version and Stable::Description for 3.1r2.
1788 * config/debian-non-US/dak.conf: sync with klecker - update
1789 version number of 3.0 and MoreInfoURL.
1791 * docs/README.stable-point-release: Add notes about updating
1792 dak.conf and Reject-Proposed-Updates section in particular.
1793 s/woody/stable/. Also need to update README.html.
1795 * scripts/debian/mklslar: drop support for uncompressed ls-lR file.
1797 * config/debian/apt.conf: Add udeb tree for proposed-updates.
1799 2006-05-20 Ryan Murray <rmurray@debian.org>
1801 * scripts/debian/update-ftpstats: new script to update daily
1802 architecture size graph data.
1804 * config/debian/cron.buildd: sync with spohr - due to ftp-master /
1805 buildd split, simply ssh to buildd.d.o and call 'trigger.often'
1808 * config/debian/cron.daily: ssh to buildd and run 'trigger.daily'
1809 before we finish. Don't push to merkel.
1811 * dak/process_unchecked.py (check_changes): Also look in
1812 ProposedUpdates queue dir.
1813 (check_files): likewise.
1815 2006-05-20 Anthony Towns <ajt@debian.org>
1817 * scripts/debian/mkfilesindices: new script to generate file
1818 indices used for partial mirroring.
1820 * config/debian/cron.daily: add progress timestamps.
1822 * config/debian/dak.conf: update Dinstall::SigningKeyIds. Add
1823 amd64 to testing, unstable and experimental. Drop sh from
1824 experimental. Move Experimental to dists/experimental. Add
1825 Dir::ProposedUpdates. Add Architectures::amd64.
1827 * config/debian/apt.conf: add amd64 to testing, unstable and
1828 experimental. Drop uncompressed Packages files from testing. Drop
1829 sh from experimental. Move experimental to dists/experimental/.
1831 * config/debian/vars (archs): add amd64.
1833 * dak/process_unchecked.py (action): Add support for
1834 proposed-updates approval queue.
1835 (is_stableupdate): new function - checks if the upload is targeted
1836 at proposed-updates.
1837 (do_stableupdate): likewise - moves upload to proposed-updates
1840 * dak/process_new.py (do_new): warn if original or new target
1843 * dak/generate_releases.py (print_md5sha_files): less whitespace
1844 between the hash and size.
1846 * dak/generate_index_diffs.py (genchanges): don't say we're not
1847 doing anything. Better formatting of other messages.
1848 (main): don't skip experimental and remove some 'doing stuff'
1851 2006-05-18 James Troup <james@nocrew.org>
1853 * dak/clean_suites.py (clean_binaries): remove debug print of SQL
1856 * dak/init_dirs.py: pylint cleanups - long lines, unused globals,
1857 docstrings, untabify, don't shadow builtins, lowercase non-global
1858 variable names, spaces after commas. Also bail if given any
1859 arguments since we don't accept any.
1860 * dak/init_db.py: likewise. Also split large main() into
1861 subfunctions and rename get() to sql_get().
1863 * dak/init_db.py (main): check returned value from
1864 database.get_archive_id().
1866 * dak/dak.py: renamed from shell.py. Update to support new source
1867 layout. Created init() and usage() functions. Various
1868 pylint-inspired cleanups. Use daklib utils.warn() and
1869 utils.fubar(). Change 'functionality' variable to only have
1870 (command, description) and always invoke main() when running the
1871 module. Also support -h.
1873 2006-05-17 James Troup <james@nocrew.org>
1875 * dak/check_archive.py: remove $Id$ and $Revision$ strings. Update
1876 imports of and calls to daklib modules. Change script name
1877 everywhere, i.e. in output, mails, comments and configuration tree
1878 + filenames. Also update references to other renamed scripts,
1879 classes and templates. Use '.dak' instead of '.katie' for the
1880 queue info storage files.
1882 * dak/check_overrides.py: likewise. (Renamed from cindy)
1883 * dak/check_proposed_updates.py: likewise. (Renamed from jeri)
1884 * dak/clean_proposed_updates.py: likewise. (Renamed from halle)
1885 * dak/clean_queues.py: likewise. (Renamed from shania)
1886 * dak/clean_suites.py: likewise. (Renamed from rhona)
1887 * dak/compare_suites.py: likewise. (Renamed from andrea)
1888 * dak/control_overrides.py: likewise. (Renamed from natalie)
1889 * dak/control_suite.py: likewise. (Renamed from heidi)
1890 * dak/cruft_report.py: likewise. (Renamed from rene)
1891 * dak/decode_dot_dak.py: likewise. (Renamed from ashley)
1892 * dak/find_null_maintainers.py: likewise. (Renamed from rosamund)
1893 * dak/generate_index_diffs.py: likewise. (Renamed from tiffani)
1894 * dak/generate_releases.py: likewise. (Renamed from ziyi)
1895 * dak/import_archive.py: likewise. (Renamed from neve)
1896 * dak/import_ldap_fingerprints.py: likewise. (Renamed from emilie)
1897 * dak/import_users_from_passwd.py: likewise. (Renamed from julia)
1898 * dak/init_db.py: likewise. (Renamed from alyson)
1899 * dak/init_dirs.py: likewise. (Renamed from rose)
1900 * dak/ls.py: likewise. (Renamed from madison)
1901 * dak/make_maintainers.py: likewise. (Renamed from charisma)
1902 * dak/make_overrides.py: likewise. (Renamed from denise)
1903 * dak/make_suite_file_list.py: likewise. (Renamed from jenna)
1904 * dak/mirror_split.py: likewise. (Renamed from billie)
1905 * dak/override.py: likewise. (Renamed from alicia)
1906 * dak/poolize.py: likewise. (Renamed from catherine)
1907 * dak/process_accepted.py: likewise. (Renamed from kelly)
1908 * dak/process_new.py: likewise. (Renamed from lisa)
1909 * dak/process_unchecked.py: likewise. (Renamed from jennifer)
1910 * dak/queue_report.py: likewise. (Renamed from helena)
1911 * dak/reject_proposed_updates.py: likewise. (Renamed from lauren)
1912 * dak/rm.py: likewise. (Renamed from melanie)
1913 * dak/security_install.py: likewise. (Renamed from amber)
1914 * dak/split_done.py: likewise. (Renamed from nina)
1915 * dak/stats.py: likewise. (Renamed from saffron)
1916 * dak/symlink_dists.py: likewise. (Renamed from saffron)
1917 * daklib/database.py: likewise. (Renamed from db_access)
1918 * daklib/queue.py: likewise. 'Katie' class -> 'Upload'. (Renamed from katie)
1919 * daklib/utils.py: likewise.
1921 * dak/cruft_report.py: Use '[auto-cruft]' as the magic "this removal
1922 doesn't need to notify anyone" string.
1923 * dak/rm.py: likewise, look for '[auto-cruft]' as the magic string.
1925 * dak/process_accepted.py (init): drop -V/--version argument.
1926 * dak/process_new.py (init): likewise.
1927 * dak/process_unchecked.py (init): likewise.
1928 * dak/reject_proposed_updates.py (init): likewise
1930 * dak/shell.py: Renamed from dak. ".katie" -> ".dak"
1932 * dak/stats.py: in usage() output change STAT to MODE.
1934 2006-05-15 James Troup <james@nocrew.org>
1936 * dak/queue_report.py: remove unused encodings imports.
1938 * dak/mirror_split.py: drop unused pg, pwd, db_access and logging
1939 imports. Initalize 'Cnf' as a global.
1940 (BillieDB._internal_recurse): fix 'util.' typo.
1942 * dak/import_ldap_fingerprints.py (main): drop unused time import and
1943 commented out time check for LDAP search.
1945 2005-12-16 Ryan Murray <rmurray@debian.org>
1947 * halle: add support for udebs
1948 * kelly: stable_install: add support for binNMU versions
1950 2005-12-05 Anthony Towns <aj@erisian.com.au>
1952 * katie.py: Move accept() autobuilding support into separate function
1953 (queue_build), and generalise to build different queues
1955 * db_access.py: Add get_or_set_queue_id instead of hardcoding accepted=0
1957 * jennifer: Initial support for enabling embargo handling with the
1958 Dinstall::SecurityQueueHandling option.
1959 * jennifer: Shift common code into remove_from_unchecked and move_to_dir
1962 * katie.conf-security: Include embargo options
1963 * katie.conf-security: Add Lock dir
1964 * init_pool.sql-security: Create disembargo table
1965 * init_pool.sql-security: Add constraints for disembargo table
1967 2005-11-26 Anthony Towns <aj@erisian.com.au>
1969 * Merge of changes from klecker, by various people
1971 * amber: special casing for not passing on amd64 and oldstable updates
1972 * amber: security mirror triggering
1973 * templates/amber.advisory: updated advisory structure
1974 * apt.conf.buildd-security: update for sarge's release
1975 * apt.conf-security: update for sarge's release
1976 * cron.buildd-security: generalise suite support, update for sarge's release
1977 * cron.daily-security: update for sarge's release, add udeb support
1978 * vars-security: update for sarge's release
1979 * katie.conf-security: update for sarge's release, add amd64 support,
1982 * docs/README.names, docs/README.quotes: include the additions
1984 2005-11-25 Anthony Towns <aj@erisian.com.au>
1986 * Changed accepted_autobuild to queue_build everywhere.
1987 * Add a queue table.
1988 * Add a "queue" field in the queue_build table (currently always 0)
1990 * jennifer: Restructure to make it easier to support special
1991 purpose queues between unchecked and accepted.
1993 2005-11-25 Anthony Towns <aj@erisian.com.au>
1995 * Finishing merge of changes from spohr, by various people still
1997 * jennifer: If changed-by parsing fails, set variables to "" so REJECT
1999 * jennifer: Re-enable .deb ar format checking
2000 * katie.py: Convert to +bX binNMU special casing
2001 * rhona: Add some debug output when deleting binaries
2002 * cron.daily: Add emilie
2003 * cron.unchecked: Add lock files
2005 2005-11-15 Anthony Towns <aj@erisian.com.au>
2007 * Merge of changes from spohr, by various people.
2009 * tiffani: new script to do patches to Packages, Sources and Contents
2010 files for quicker downloads.
2011 * ziyi: update to authenticate tiffani generated files
2013 * dak: new script to provide a single binary with less arbitrary names
2014 for access to dak functionality.
2016 * cindy: script implemented
2018 * saffron: cope with suites that don't have a Priority specified
2019 * heidi: use get_suite_id()
2020 * denise: don't hardcode stable and unstable, or limit udebs to unstable
2021 * denise: remove override munging for testing (now done by cindy)
2022 * helena: expanded help, added new, sort and age options, and fancy headers
2023 * jennifer: require description, add a reject for missing dsc file
2024 * jennifer: change lock file
2025 * kelly: propogation support
2026 * lisa: honour accepted lock, use mtime not ctime, add override type_id
2027 * madison: don't say "dep-retry"
2028 * melanie: bug fix in output (missing %)
2029 * natalie: cope with maintainer_override == None; add type_id for overrides
2030 * nina: use mtime, not ctime
2032 * katie.py: propogation bug fixes
2033 * logging.py: add debugging support, use | as the logfile separator
2035 * katie.conf: updated signing key (4F368D5D)
2036 * katie.conf: changed lockfile to dinstall.lock
2037 * katie.conf: added Lisa::AcceptedLockFile, Dir::Lock
2038 * katie.conf: added tiffani, cindy support
2039 * katie.conf: updated to match 3.0r6 release
2040 * katie.conf: updated to match sarge's release
2042 * apt.conf: update for sarge's release
2043 * apt.conf.stable: update for sarge's release
2044 * apt.conf: bump daily max Contents change to 25MB from 12MB
2046 * cron.daily: add accepted lock and invoke cindy
2047 * cron.daily: add daily.lock
2048 * cron.daily: invoke tiffani
2049 * cron.daily: rebuild accepted buildd stuff
2050 * cron.daily: save rene-daily output on the web site
2051 * cron.daily: disable billie
2052 * cron.daily: add stats pr0n
2054 * cron.hourly: invoke helena
2056 * pseudo-packages.maintainers,.descriptions: miscellaneous updates
2057 * vars: add lockdir, add etch to copyoverrides
2058 * Makefile: add -Ipostgresql/server to CXXFLAGS
2060 * docs/: added README.quotes
2061 * docs/: added manpages for alicia, catherine, charisma, cindy, heidi,
2062 julia, katie, kelly, lisa, madison, melanie, natalie, rhona.
2064 * TODO: correct spelling of "conflicts"
2066 2005-05-28 James Troup <james@nocrew.org>
2068 * helena (process_changes_files): use MTIME rather than CTIME (the
2069 C's not for 'creation', stupid).
2070 * lisa (sort_changes): likewise.
2072 * jennifer (check_distributions): use has_key rather than an 'in'
2073 test which doesn't work with python2.1. [Probably by AJ]
2075 2005-03-19 James Troup <james@nocrew.org>
2077 * rene (main): use Suite::<suite>::UdebComponents to determine
2078 what components have udebs rather than assuming only 'main' does.
2080 2005-03-18 James Troup <james@nocrew.org>
2082 * utils.py (rfc2047_encode): use codecs.lookup() rather than
2083 encodings.<encoding>.Codec().decode() as encodings.utf_8 no longer
2084 has a Codec() module in python2.4. Thanks to Andrew Bennetts
2085 <andrew@ubuntu.com>.
2087 2005-03-06 Joerg Jaspert <ganneff@debian.org>
2089 * helena: add -n/--new HTML output option and improved sorting
2092 2005-03-06 Ryan Murray <rmurray@debian.org>
2094 * shania(main): use Cnf::Dir::Reject instead of REJECT
2096 2005-02-08 James Troup <james@nocrew.org>
2098 * rene (main): add partial NBS support by checking that binary
2099 packages are built by their real parent and not some random
2101 (do_partial_nbs): likewise.
2103 2005-01-18 James Troup <james@nocrew.org>
2105 * katie.py (Katie.build_summaries): avoid leaking file handle when
2106 extracting package description.
2107 (Katie.force_reject): remember and close each file descriptor we
2109 (Katie.do_reject): s/file/temp_fh/ to avoid pychecker warning.
2110 s/reason_file/reason_fd/ because it's a file descriptor.
2111 (Katie.check_dsc_against_db): avoid leaking file handle whenever
2112 invoking apt_pkg.md5sum().
2114 * jennifer (check_deb_ar): new function: sanity check the ar
2116 (check_files): use it.
2117 (check_timestamps): check for data.tar.bz2 if data.tar.gz can't be
2119 (check_files): accept 'raw-installer' as an alias for 'byhand'.
2121 2005-01-14 Anthony Towns <ajt@debian.org>
2123 * kelly: when UNACCEPTing, don't double up the "Rejecting:"
2125 * propup stuff (thanks to Andreas Barth)
2126 * katie.conf: add stable MustBeOlderThan testing, add -security
2128 * jennifer: set distribution-version in .katie if propup may be needed
2129 * katie.py: add propogation to cross_suite_version_check
2131 2004-11-27 James Troup <james@nocrew.org>
2133 * nina: new script to split monolithic queue/done into date-based
2136 * rene (usage): document -s/--suite.
2137 (add_nbs): use .setdefault().
2138 (do_anais): likewise.
2139 (do_nbs): don't set a string to "" and then += it.
2140 (do_obsolete_source): new function - looks for obsolete source
2141 packages (i.e source packages whose binary packages are ALL a)
2142 claimed by someone else and b) newer when built from the other
2144 (main): support -s/--suite. Add 'obsolete source' to both 'daily'
2145 and 'full' check modes. Check for obsolete source packages.
2146 linux-wlan-ng has been fixed - remove hideous bodge.
2148 * jennifer (check_distributions): support 'reject' suite map type.
2150 * utils.py (validate_changes_file_arg): s/file/filename/.
2151 s/fatal/require_changes/. If require_changes is -1, ignore errors
2152 and return the .changes filename regardless.
2153 (re_no_epoch): s/\*/+/ as there must be a digit in an epoch.
2154 (re_no_revision): don't escape '-', it's not a special character.
2155 s/\*/+/ as there must be at least one non-dash character after the
2156 dash in a revision. Thanks to Christian Reis for noticing both of
2159 * ashley (main): pass require_changes=-1 to
2160 utils.validate_changes_file_arg().
2162 * pseudo-packages.maintainers (kernel): switch to 'Debian Kernel
2163 Team <debian-kernel@lists.debian.org>'.
2165 * katie.py (Katie.in_override_p): fix .startswith() usage.
2167 * katie.conf (Dinstall::DefaultSuite): add as 'unstable'.
2168 (Lauren::MoreInfoURL): update to 3.0r3.
2169 (Suite::Stable::Version): likewise.
2170 (Suite::Stable::Description): likewise.
2172 * cron.daily: disable automatic task override generation.
2174 * cindy (process): restrict "find all packages" queries by
2175 component. Respect Options["No-Action"].
2176 (main): add -n/--no-action support. Only run on unstable. Rename
2177 type to otype (pychecker).
2179 2004-11-27 Daniel Silverstone <dsilvers@digital-scurf.org>
2181 * katie.conf (Billie::BasicTrees): add all architectures.
2182 (Billie::CombinationTrees): remove 'welovehp' and 'embedded', add
2185 * cron.daily: Update a 'current' symlink when creating the
2186 post-daily-cron-job database backup to aid mirroring to merkel.
2189 * billie (BillieTarget.poolish_match): handle .udeb too.
2191 2004-10-13 Ryan Murray <rmurray@debian.org>
2193 * amber (do_upload): Sort changes files in "katie" order so that
2194 source always arrives before binary-only rebuilds
2196 2004-10-05 James Troup <james@nocrew.org>
2198 * jennifer (check_dsc): correct reject message on invalid
2201 2004-09-20 James Troup <james@nocrew.org>
2203 * alicia: remove unused 'pwd' import.
2205 * tea (check_override): underline suite name in output properly.
2207 * rene (main): read a compressed Packages file.
2208 * tea (validate_packages): likewise.
2210 * katie.py (re_fdnic): add 'r' prefix.
2211 (re_bin_only_nmu_of_mu): likewise.
2212 (re_bin_only_nmu_of_nmu): likewise.
2214 * madison (main): retrieve component information too and display
2215 it if it's not 'main'.
2216 * melanie (reverse_depends_check): likewise.
2218 * utils.py (pp_dep): renamed...
2219 (pp_deps): ... to this.
2220 * jeri (check_dep): update calls to utils.pp_deps().
2221 * melanie (reverse_depends_check): likewise.
2223 * jennifer (check_changes): move initalization of email variables
2225 (process_it): ...to here as we no longer always run
2226 check_changes(). Don't bother to initialize
2227 changes["architecture"].
2229 * denise (list): renamed to...
2230 (do_list): ...this to avoid name clash with builtin 'list'.
2231 Similarly, s/file/output_file/, s/type/otype/. Use .setdefault()
2233 (main): Likewise for name clash avoidance and also
2234 s/override_type/suffix/. Adjust call to do_list().
2236 2004-09-01 Ryan Murray <rmurray@debian.org>
2238 * tea (check_files): check the pool/ directory instead of dists/
2240 2004-08-04 James Troup <james@nocrew.org>
2242 * jenna (cleanup): use .setdefault() for dictionaries.
2243 (write_filelists): likewise.
2245 (write_filelists): Use utils.split_args() not split() to split
2246 command line arguments.
2247 (stable_dislocation_p): likewise.
2249 (write_filelists): Add support for mapping side of suite-based
2250 "Arch: all mapping".
2251 (do_da_do_da): ensure that if we're not doing all suites that we
2252 process enough to be able correct map arch: all packages.
2254 * utils.py (cant_open_exc): correct exception string,
2255 s/read/open/, s/.$//.
2257 * templates/amber.advisory: update to match reality a little
2260 * melanie (reverse_depends_check): read Packages.gz rather than
2263 * jennifer (check_files): check for unknown component before
2264 checking for NEWness.
2266 * katie.py (Katie.in_override_p): use .startswith in favour of a
2269 * docs/melanie.1.sgml: document -R/--rdep-check.
2271 2004-07-12 Daniel Silverstone <dsilvers@digital-scurf.org>
2273 * billie (main): Make the verbatim lists include all the README
2275 * docs/README.names: Add billie in (correcting oversight)
2277 2004-07-01 James Troup <james@nocrew.org>
2279 * emilie (main): handle woody's case-sensitive python-ldap,
2280 s/keyfingerprint/keyFingerPrint/.
2282 2004-06-25 James Troup <james@nocrew.org>
2284 * debian/control (Depends): add dpkg-dev since jennifer uses
2287 2004-06-24 James Troup <james@nocrew.org>
2289 * melanie (main): s/file/temp_file/ and close file handle before
2290 removing the temporary file.
2291 (main): don't warn about needing a --carbon-copy if in no-action
2294 * rene (do_nbs): pcmcia-cs has been fixed - remove hideous bodge.
2297 * test/006/test.py (main): check bracketed email-only form.
2299 * utils.py (fix_maintainer): if the Maintainer string is bracketed
2300 email-only, strip the brackets so we don't end up with
2301 <<james@nocrew.org>>.
2303 2004-06-20 James Troup <james@nocrew.org>
2305 * jennifer (process_it): only run check_changes() if
2306 check_signature() returns something. (Likewise)
2308 * utils.py (changes_compare): if there's no changes["version"] use
2309 "0" rather than None. (Avoids a crash on unsigned changes file.)
2311 2004-06-17 Martin Michlmayr <tbm@cyrius.com>
2313 * jeri (pp_dep): moved from here to ...
2314 * utils.py (pp_dep): here.
2316 * melanie (main): add reverse dependency checking.
2318 2004-06-17 James Troup <james@nocrew.org>
2320 * jennifer (check_dsc): s/dsc_whitespace_rules/signing_rules/.
2321 * tea (check_dscs): likewise.
2323 * utils.py (parse_changes): s/dsc_whitespace_rules/signing_rules/,
2324 change from boolean to a variable with 3 possible values, 0 and 1
2325 as before, -1 means don't require a signature. Makes
2326 parse_changes() useful for parsing arbitary RFC822-style files,
2327 e.g. 'Release' files.
2328 (check_signature): add support for detached signatures by passing
2329 the files the signature is for as an optional third argument.
2330 s/filename/sig_filename/g. Add a fourth optional argument to
2331 choose the keyring(s) to use. Don't os.path.basename() the
2332 sig_filename before checking it for taint.
2333 (re_taint_free): allow '/'.
2335 2004-06-11 James Troup <james@nocrew.org>
2337 * tea (check_files): make override.unreadable optional.
2338 (validate_sources): close the Sources file handle.
2340 * docs/README.first: clarify that 'alyson' and running
2341 add_constraints.sql by hand is something you only want to do if
2342 you're not running 'neve'.
2344 * docs/README.config (Location::$LOCATION::Suites): document.
2346 * db_access.py (do_query): also print out the result of the query.
2348 2004-06-10 James Troup <james@nocrew.org>
2350 * katie.py (Katie.cross_suite_version_check): post-woody versions
2351 of python-apt's apt_pkg.VersionCompare() function apparently
2352 returns variable integers for less than or greater than results -
2353 update our result checking to match.
2354 * jenna (resolve_arch_all_vs_any): likewise.
2355 * charisma (main): likewise.
2357 2004-06-09 James Troup <james@nocrew.org>
2359 * jennifer (process_it): s/changes_valid/valid_changes_p/. Add
2360 valid_dsc_p and don't run check_source() if check_dsc() failed.
2361 (check_dsc): on fatal failures return 0 so check_source() isn't
2362 run (since it makes fatal assumptions about the presence of
2363 mandatory .dsc fields).
2364 Remove unused and obsolete re_bad_diff and re_is_changes regexps.
2366 2004-05-07 James Troup <james@nocrew.org>
2368 * katie.conf (Rhona::OverrideFilename): unused and obsolete, remove.
2369 * katie.conf-non-US (Rhona::OverrideFilename): likewise.
2371 * katie.conf (Dir::Override): remove duplicate definition.
2373 * neve (get_or_set_files_id): add an always-NULL last_used column
2376 2004-04-27 James Troup <james@nocrew.org>
2378 * apt.conf-security (tree "dists/stable/updates"): add
2379 ExtraOverride - noticed by Joey Hess (#246050).
2380 (tree "dists/testing/updates"): likewise.
2382 2004-04-20 James Troup <james@nocrew.org>
2384 * jennifer (check_files): check for existing .changes or .katie
2385 files of the same name in the Suite::<suite>::Copy{Changes,Katie}
2388 2004-04-19 James Troup <james@nocrew.org>
2390 * jennifer (check_source): handle failure to remove the temporary
2391 directory (used for source tree extraction) better, specifically:
2392 if we fail with -EACCES, chmod -R u+rwx the temporary directory
2393 and try again and if that works, REJECT the package.
2395 2004-04-17 James Troup <james@nocrew.org>
2397 * docs/madison.1.sgml: document -b/--binary-type,
2398 -g/--greaterorequal and -G/--greaterthan.
2400 * madison (usage): -b/--binary-type only takes a single argument.
2401 Document -g/--greaterorequal and -G/--greaterthan.
2402 (main): add support for -g/--greaterorequal and -G/--greaterthan.
2404 2004-04-12 Daniel Silverstone <dsilvers@digital-scurf.org>
2406 * billie: Cleaned up a load of comments, added /README.non-US to
2407 the verbatim matches list.
2409 2004-04-07 Daniel Silverstone <dsilvers@digital-scurf.org>
2411 * utils.py (size_type): Make it use real binary megabytes and
2412 kilobytes, instead of the marketing terms used before.
2414 2004-04-07 James Troup <james@nocrew.org>
2416 * katie.py (Katie.check_dsc_against_db): in the case we're
2417 ignoring an identical-to-existing orig.tar.gz remember the path to
2418 the existent version in pkg.orig_tar_gz. Adjust query to grab
2419 location.path too to be able to do so.
2421 2004-04-03 James Troup <james@nocrew.org>
2423 * debian/control (Depends): add python2.1-email | python (>= 2.2)
2424 needed for new utils.rfc2047_encode() function.
2426 * utils.py (re_parse_maintainer): allow whitespace inside the
2428 (Error): new exception base class.
2429 (ParseMaintError): new exception class.
2430 (force_to_utf8): new function.
2431 (rfc2047_encode): likewise.
2432 (fix_maintainer): rework. use force_to_utf8() to force name and
2433 rfc822 return values to always use UTF-8. use rfc2047_encode() to
2434 return an rfc2047 value. Validate the address to catch missing
2435 email addresses and (some) broken ones.
2437 * katie.py (nmu_p.is_an_nmu): adapt for new utils.fix_maintainer()
2438 by adopting foo2047 return value.
2439 (Katie.dump_vars): add changedby2047 and maintainer2047 as
2440 mandatory changes fields. Promote changes and maintainer822 to
2442 (Katie.update_subst): default maintainer2047 rather than
2443 maintainer822. User foo2047 rather than foo822 when setting
2444 __MAINTAINER_TO__ or __MAINTAINER_FROM__.
2446 * jennifer (check_changes): set default changes["maintainer2047"]
2447 and changes["changedby2047"] values rather than their 822
2448 equivalents. Makes changes["changes"] a mandatory field. Adapt
2449 to new utils.fix_maintainer() - reject on exception and adopt
2450 foo2047 return value.
2451 (check_dsc): if a mandatory field is missing don't do any further
2452 checks and as a result reduce paranoia about dsc[var] existence.
2453 Validate the maintainer field by calling new
2454 utils.fix_maintainer().
2456 * ashley (main): add changedby2047 and maintainer2047 to mandatory
2457 changes fields. Promote maintainer822 to a mandatory changes
2458 field. add "pool name" to files fields.
2460 * test/006/test.py: new file - tests for new
2461 utils.fix_maintainer().
2463 2004-04-01 James Troup <james@nocrew.org>
2465 * templates/lisa.prod (To): use __MAINTAINER_TO__ not __MAINTAINER__.
2467 * jennifer (get_changelog_versions): create a symlink mirror of
2468 the source files in the temporary directory.
2469 (check_source): if check_dsc_against_db() couldn't find the
2470 orig.tar.gz bail out.
2472 * katie.py (Katie.check_dsc_against_db): if the orig.tar.gz is not
2473 part of the upload store the path to it in pkg.orig_tar_gz and if
2474 it can't be found set pkg.orig_tar_gz to -1.
2476 Explicitly return the second value as None in the (usual) case
2477 where we don't have to reprocess. Remove obsolete diagnostic
2480 * lisa (prod_maintainer): don't return anything, no one cares. (pychecker)
2482 * utils.py (temp_filename): new helper function that wraps around
2485 * katie.py (Katie.do_reject): use it and don't import tempfile.
2486 * lisa (prod_maintainer): likewise.
2487 (edit_note): likewise.
2488 (edit_new): likewise.
2489 * lauren (reject): likewise.
2490 * melanie (main): likewise.
2491 * neve (do_sources): likewise.
2492 * rene (main): likewise.
2493 * tea (validate_sources): likewise.
2495 2004-03-31 James Troup <james@nocrew.org>
2497 * tea (validate_sources): remove unused 's' temporary variable.
2499 2004-03-15 James Troup <james@nocrew.org>
2501 * jennifer (check_dsc): check changes["architecture"] for
2502 source before we do anything else.
2504 2004-03-21 Daniel Silverstone <dsilvers@digital-scurf.org>
2507 * katie.conf (Billie): Added sample Billie stanza to katie.conf
2509 2004-03-12 James Troup <james@nocrew.org>
2511 * docs/README.config (Dir::Queue::BTSVersionTrack): document.
2513 * katie.conf (Dir::Queue::BTSVersionTrack): define.
2515 * katie.py (Katie.accept): add support for DebBugs Version
2516 Tracking by writing out .versions (generated in jennifer's
2517 get_changelog_versions()) and .debinfo (mapping of binary ->
2520 * ashley (main): add dsc["bts changelog"].
2522 * katie.py (Katie.dump_vars): store dsc["bts changelog"] too.
2524 * jennifer (check_diff): obsoleted by check_source(), removed.
2525 (check_source): new function: create a temporary directory and
2526 move into it and call get_changelog_versions().
2527 (get_changelog_versions): new function: extract the source package
2528 and optionally parse debian/changelog to obtain the version
2529 history for the BTS.
2530 (process_it): call check_source() rather than check_diff().
2532 2004-03-08 James Troup <james@nocrew.org>
2534 * lisa (edit_index): Fix logic swapo from 'use "if varfoo in
2535 listbar" rather than "if listbar.count(varfoo)"' change on
2538 2004-03-05 James Troup <james@nocrew.org>
2540 * alicia (main): don't warn about not closing bugs - we don't
2541 manage overrides through the BTS.
2543 2004-02-27 Martin Michlmayr <tbm@cyrius.com>
2545 * docs/README.config: lots of updates and corrections.
2546 * docs/README.first: likewise.
2548 * docs/README.config: drop unused Dir::Queue::Root.
2549 * katie.conf-non-US: likewise.
2550 * katie.conf: likewise.
2551 * katie.conf-security: likewise.
2553 2004-02-27 James Troup <james@nocrew.org>
2555 * rose (process_tree): use 'if var in [ list ]' rather than long
2556 'if var == foo or var == bar or var == baz'. Suggested by Martin
2559 * jennifer (check_files): reduce 'if var != None' to 'if var' as
2560 suggested by Martin Michlmayr.
2561 * catherine (poolize): likewise.
2562 * charisma (main): likewise.
2563 * halle (check_changes): likewise.
2564 * heidi (main): likewise.
2565 (process_file): likewise.
2566 * kelly (install): likewise.
2567 (stable_install): likewise.
2568 * utils.py (fix_maintainer): likewise.
2570 * apt.conf: add support for debian-installer in testing-proposed-updates.
2571 * katie.conf (Suite::Testing-Proposed-Updates::UdebComponents):
2574 * mkmaintainers: add "-T15" option to wget of non-US packages file
2575 so that we don't hang cron.daily if non-US is down.
2577 * templates/lisa.prod (Subject): Prefix with "Comments regarding".
2579 * templates/jennifer.bug-close: add Source and Source-Version
2580 pseudo-headers that may be used for BTS Version Tracking someday
2583 * rene (do_nbs): special case linux-wlan-ng like we do for pcmcia.
2586 * cron.unchecked: it's /org/ftp.debian.org not ftp-master.
2588 2004-02-25 James Troup <james@nocrew.org>
2590 * katie.conf (SuiteMappings): don't map testing-security to
2593 2004-02-24 James Troup <james@nocrew.org>
2595 * katie.py (Katie.__init__): remove unused 'values' field.
2597 * utils.py (extract_component_from_section): use 's.find(c) != -1'
2598 rather than 's.count(c) > 0'.
2600 * katie.py (Katie.source_exists): use "if varfoo in listbar"
2601 rather than "if listbar.count(varfoo)".
2602 * halle (check_joey): likewise.
2603 * jeri (check_joey): likewise.
2604 * lisa (edit_index): likewise.
2605 * jenna (stable_dislocation_p): likewise.
2607 * jennifer (main): remove unused global 'nmu'.
2609 2004-02-03 Daniel Silverstone <dsilvers@digital-scurf.org>
2611 * pseudo-packages.maintainers (ftp.debian.org): Changed the maintainer
2612 to be ftpmaster@ftp-master.debian.org to bring it into line with how
2613 the dak tools close bugs.
2615 2004-02-02 Daniel Silverstone <dsilvers@digital-scurf.org>
2617 * katie.conf (Alicia): Added an Alicia section with email address
2618 * templates/alicia.bug-close: Added
2619 * docs/alicia.1.sgml: Added the docs for the -d/--done argument
2620 * alicia (main): Added a -d/--done argument
2622 2004-02-02 Daniel Silverstone <dsilvers@digital-scurf.org>
2624 * templates/lisa.prod: Oops, missed a BITCH->PROD conversion
2626 2004-01-29 Daniel Silverstone <dsilvers@digital-scurf.org>
2628 * lisa (prod_maintainer): Added function to prod the maintainer without
2629 accepting or rejecting the package
2630 * templates/lisa.prod: Added this template for the prodding mail
2632 * .cvsignore: Added neve-files which turns up in new installations
2634 2004-01-30 Daniel Silverstone <dsilvers@digital-scurf.org>
2636 * alicia (usage): Fixed usage message to offer section and priority
2637 as seperately optional arguments.
2638 * alicia (main): Added a % (arg) interpolation needed when only
2639 one of section or priority is provided and it cannot be found.
2641 2004-01-29 Daniel Silverstone <dsilvers@digital-scurf.org>
2644 * docs/alicia.1.sgml: Added
2645 * docs/Makefile: Added alicia to the list of manpages to build
2646 * docs/README.names: Noted what alicia does
2647 * docs/README.first: Noted where alicia is useful
2649 2004-01-21 James Troup <james@nocrew.org>
2651 * madison (main): add -b/--binary-type.
2654 * denise (main): generate debian-installer overrides for testing
2656 * apt.conf: add support for debian-installer in testing.
2657 * katie.conf (Suite::Testing::UdebComponents): set to main.
2659 * katie.conf (Dinstall::SigningKeyIds): 2004 key.
2660 * katie.conf-non-US (Dinstall::SigningKeyIds): likewise.
2661 * katie.conf-security (Dinstall::SigningKeyIds): likewise.
2663 * utils.py (parse_changes): don't process data not inside the
2664 signed data. Thanks to Andrew Suffield <asuffield@debian.org> for
2666 * test/005/test.py (main): new test to test for above.
2668 2004-01-04 James Troup <james@nocrew.org>
2670 * jenna (write_filelists): correct typo, s/Components/Component/
2673 2004-01-04 Ryan Murray <rmurray@debian.org>
2675 * cron.buildd: move update of overrides and Packages file...
2676 * cron.unchecked: to here.
2677 * katie.conf-non-US: (Dinstall::SingingKeyIds) update for 2003v2 key
2678 * katie.conf-security: likewise
2680 2003-11-20 James Troup <james@nocrew.org>
2682 * jenna (main): don't use utils.try_with_debug(), it produces way
2685 * halle (check_changes): don't error out if a .changes refers to a
2686 non-existent package, just warn and skip the file.
2688 * docs/README.stable-point-release: mention halle and .changes
2689 obsoleted by removal through melanie. Update for 3.0r2.
2691 * katie.conf (Suite::Stable::Version): bump to 3.0r2.
2692 (Suite::Stable::Description): update for 3.0r2.
2693 (Lauren::MoreInfoURL): likewise.
2694 * katie.conf-non-US (Suite::Stable::Version): likewise.
2695 (Suite::Stable::Description): likewise.
2696 (Lauren::MoreInfoURL): likewise.
2698 * apt.conf.stable (Default): don't define MaxContentsChange.
2699 * apt.conf.stable-non-US (Default): likewise.
2701 * lauren (reject): hack to work around partial replacement of an
2702 upload, i.e. one or more binaries superseded by another source
2705 2003-11-17 James Troup <james@nocrew.org>
2707 * pseudo-packages.maintainers: point installation-reports at
2708 debian-boot@l.d.o rather than debian-testing@l.d.o at jello@d.o's
2711 * utils.py (parse_changes): calculate the number of lines once
2712 with len() rather than max().
2714 * jennifer (check_dsc): handle the .orig.tar.gz disappearing from
2715 files, since check_dsc_against_db() deletes the .orig.tar.gz
2718 2003-11-13 Ryan Murray <rmurray@debian.org>
2720 * apt.conf: specify a src override file for debian-installer
2722 2003-11-10 James Troup <james@nocrew.org>
2724 * fernanda.py (strip_pgp_signature): new function - strips PGP
2725 signature from a file and returns the modified contents of the
2727 (display_changes): use it.
2728 (read_dsc): likewise.
2730 2003-11-09 Ryan Murray <rmurray@debian.org>
2732 * cron.buildd: export accepted_autobuild table for unstable, and use
2733 it to generate the incoming Packages/Sources rather than having apt
2735 * apt.conf.buildd: use exported table from cron.buildd to generate
2738 2003-11-07 James Troup <james@nocrew.org>
2740 * kelly: import errno.
2742 * katie.py (Katie.build_summaries): sort override disparities.
2744 * kelly (install): set dsc_component based on the .dsc's component
2745 not a random binaries.
2747 2003-10-29 James Troup <james@nocrew.org>
2749 * katie.py (Katie.build_summaries): don't assume changes["source"]
2750 exists since it might not.
2752 2003-10-20 James Troup <james@nocrew.org>
2754 * pseudo-packages.maintainers: update security.d.o to use
2755 team@s.d.o at joy@'s request.
2757 2003-10-17 James Troup <james@nocrew.org>
2759 * jennifer (check_dsc): use .startswith rather than .find() == 0.
2761 2003-10-17 Martin Michlmayr <tbm@cyrius.com>
2763 * tea (chk_bd_process_dir): use .endswith rather than slice.
2765 2003-10-14 James Troup <james@nocrew.org>
2767 * tea (check_build_depends): new function.
2768 (chk_bd_process_dir): likewise. Validates build-depends in .dsc's
2770 (main): update for new function.
2773 * katie.py (Katie.do_reject): sanitize variable names,
2774 s/reject_filename/reason_filename/, s/fd/reason_fd/. Move shared
2775 os.close() to outside if clause.
2777 * jennifer (check_dsc): check build-depends and
2778 build-depends-indep by running them past apt_pkg.ParseSrcDepends.
2779 Fold the ARRAY check into the same code block and tidy up it's
2781 (check_changes): ensure that the Files field is non-empty.
2782 Suggested by Santiago Vila <sanvila@unex.es>
2783 (check_changes): normalize reject messages.
2784 (check_dsc): instead of doing most of the checks inside a for loop
2785 and an if, find the dsc_filename in a short loop over files first
2786 and then do all the checks. Add check for more than one .dsc in a
2787 .changes which we can't handle. Normalize reject messages.
2789 2003-10-13 James Troup <james@nocrew.org>
2791 * katie.conf (Dinstall::Reject::NoSourceOnly): set to true.
2792 * katie.conf-non-US (Dinstall::Reject::NoSourceOnly): likewise.
2794 * jennifer (check_files): Set 'has_binaries' and 'has_source'
2795 variables while iterating over 'files'. Don't regenerate it when
2796 checking for source if source is mentioned.
2798 Reject source only uploads if the config variable
2799 Dinstall::Reject::NoSourceOnly is set.
2801 2003-10-03 James Troup <james@nocrew.org>
2803 * rene (main): add nasty hardcoded reference to debian-installer
2804 so we detect NBS .udebs.
2806 2003-09-29 James Troup <james@nocrew.org>
2808 * apt.conf (old-proposed-updates): remove.
2809 * apt.conf-non-US (old-proposed-updates): likewise.
2811 2003-09-24 James Troup <james@nocrew.org>
2813 * tea (check_files_not_symlinks): new function, ensure files
2814 mentioned in the database aren't symlinks. Includes code to
2815 update any files that are like this to their real filenames +
2816 location; commented out by though.
2817 (usage): update for new function.
2820 2003-09-24 Anthony Towns <ajt@debian.org>
2822 * vars: external-overrides variable added
2823 * cron.daily: Update testing/unstable Task: overrides from joeyh
2824 managed external source.
2826 2003-09-22 James Troup <james@nocrew.org>
2828 * kelly (install): if we can't move the .changes into queue/done,
2829 fail don't warn and carry on. The old behaviour pre-dates NI and
2830 doesn't make much sense now since jennifer checks both
2831 queue/accepted and queue/done for any .changes files it's
2834 * utils.py (move): don't throw exceptions on existing files or
2835 can't overwrite, instead just fubar out.
2837 * jennifer (check_dsc): also check Build-Depends-Indep for
2838 ARRAY-lossage. Noticed by Matt Zimmerman <mdz@debian.org>.
2840 2003-09-18 James Troup <james@nocrew.org>
2842 * katie.py (Katie.close_bugs): only log the bugs we've closed
2845 * kelly (main): log as 'kelly', not 'katie'.
2847 2003-09-16 James Troup <james@nocrew.org>
2849 * katie.py (Katie.check_binary_against_db): likewise noramlize.
2851 * jennifer (check_changes): normalize reject message for "changes
2852 file already exists" to be %s: <foo>.
2853 (check_dsc): add a check for 'Build-Depends: ARRAY(<hex>)'
2854 produced by broken dpkg-source in 1.10.11. Tone down and
2855 normalize rejection message for incompatible 'Format' version
2857 (check_diff): likewise tone down and normalize.
2859 2003-09-07 James Troup <james@nocrew.org>
2861 * utils.py (parse_changes): if dsc_whitespace_rules is false,
2862 don't bomb out on bogus empty lines.
2863 (build_file_list): check for changes["files"] earlier. use Dict
2864 to create files[name] dictionary.
2865 (send_mail): don't bother validating arguments.
2866 (check_signature): minor improvements to some of the rejection
2867 messages including listing the key id of the key that wasn't found
2869 (wrap): new function.
2871 * tea: add new check 'validate-indices' that ensures all files
2872 mentioned in indices (Packages, Sources) files do in fact exist.
2874 * catherine (poolize): use a local re_isadeb which handles legacy
2875 (i.e. no architecture) style .deb filenames.
2877 * rosamund: new script.
2879 * rhona (check_binaries): when checking for binary packages not in
2880 a suite, don't bother selecting files that already have a
2882 (check_sources): likewise.
2884 * rhona: change all SQL EXISTS sub-query clauses to use the
2885 postgres suggested convention of "SELECT 1 FROM".
2886 * andrea (main): likewise.
2887 * tea (check_override): likewise.
2888 * catherine (main): likewise.
2890 * katie.conf (Suite): remove OldStable and Old-Proposed-Updates
2891 entries and in other suites MustBeNewerThan's.
2892 (SuiteMappings): likewise
2893 * katie.conf-non-US: likewise.
2894 * katie.conf-security: likewise.
2896 * apt.conf-security: remove oldstable.
2897 * apt.conf.stable: likewise.
2898 * apt.conf.stable-non-US: likewise.
2899 * cron.buildd-security: likewise.
2900 * cron.daily-security: likewise.
2901 * vars-security (suites): likewise.
2902 * wanna-build/trigger.daily: likewise.
2904 * claire.py (clean_symlink): move...
2905 * utils.py (clean_symlink): here.
2907 * claire.py (find_dislocated_stable): update accordingly.
2909 2003-08-16 Anthony Towns <ajt@debian.org>
2911 * katie.py (source_exists): expand the list of distributions
2912 the source may exist in to include any suite that's mapped to
2913 the destination suite (even transitively (a->b->c)). This should
2914 unbreak binary uploads to *-proposed-updates.
2916 2003-08-09 Randall Donald <rdonald@debian.org>
2918 * lisa (recheck): change changes["distribution"].keys() to
2919 Katie.pkg.changes...
2921 2003-08-08 Randall Donald <rdonald@debian.org>
2923 * katie.py: only tag bugs as fixed-in-experimental for
2924 experimental uploads
2926 2003-07-26 Anthony Towns <ajt@debian.org>
2928 * katie.py (source_exists): add an extra parameter to limit the
2929 distribution(s) the source must exist in.
2930 * kelly, lisa, jennifer: update to use the new source_exists
2932 2003-07-15 Anthony Towns <ajt@debian.org>
2934 * ziyi: quick hack to support a FakeDI line in apt.conf to generate
2935 checksums for debian-installer stuff even when it's just a symlink to
2938 * apt.conf: add the FakeDI line
2940 2003-06-09 James Troup <james@nocrew.org>
2942 * kelly (check): make sure the 'file' we're looking for in 'files'
2943 hasn't been deleted by katie.check_dsc_against_db().
2945 2003-05-07 James Troup <james@nocrew.org>
2947 * helena (time_pp): fix s/years/year/ typo.
2949 2003-04-29 James Troup <james@nocrew.org>
2951 * madison (usage): document -c/--component.
2953 * madison (usage): Fix s/seperated/separated/.
2954 * melanie (usage): likewise.
2955 * jenna (usage): likewise.
2957 2003-04-24 James Troup <james@nocrew.org>
2959 * cron.daily-non-US: if there's nothing for kelly to install, say
2962 * jennifer (check_timestamps): print sys.exc_value as well as
2963 sys.exc_type when capturing exceptions. Prefix 'timestamp check
2964 failed' with 'deb contents' to make it clearer what timestamp(s)
2967 2003-04-15 James Troup <james@nocrew.org>
2969 * cron.daily-non-US: only run kelly if there are some .changes
2972 * rene: add -m/--mode argument which can be either daily (default)
2973 or full. In daily mode only 'nviu' and 'nbs' checks are run.
2974 Various changes to make this possible including a poor attempt at
2975 splitting main() up a little. De-hardcode suite numbers from SQL
2976 queries and return quietly from do_nviu() if experimental doesn't
2977 exist (i.e. non-US). Hardcode pcmcia-cs as dubious NBS since it
2980 * debian/control (Depends): remove python-zlib as it's obsolete.
2982 * charisma (main): don't slice the \n off strings when we're
2983 strip()-ing it anyway.
2984 * heidi (set_suite): likewise.
2985 (process_file): likewise.
2986 * natalie (process_file): likewise.
2988 2003-04-08 James Troup <james@nocrew.org>
2990 * katie.py (Katie.check_dsc_against_db): improve the speed of two
2991 slow queries by using one LIKE '%foo%' and then matching against
2992 '%s' or '/%s$' in python. Also only join location when we need it
2993 (i.e. the .orig.tar.gz query). On auric, this knocks ~3s of each
2994 query, so 6s for each sourceful package.
2996 * cron.daily: invoke rene and send the report to ftpmaster.
2997 * cron.daily-non-US: likewise.
2999 2003-03-14 James Troup <james@nocrew.org>
3001 * utils.py (send_mail): default filename to blank.
3002 * amber (make_advisory): adapt.
3003 * jennifer (acknowledge_new): likewise.
3004 * katie.py (Katie.close_bugs): likewise.
3005 (Katie.announce): likewise.
3006 (Katie.accept): likewise.
3007 (Katie.check_override): likewise.
3008 (Katie.do_reject): likewise.
3009 * kelly (do_reject): likewise.
3010 (stable_install): likewise.
3011 * lisa (do_bxa_notification): likewise.
3012 * lauren (reject): likewise.
3013 * melanie (main): likewise.
3015 * rene (add_nbs): check any NBS packages against unstable to see
3016 if they haven't been removed already.
3018 * templates/katie.rejected: remove paragraph about rejected files
3019 since they're o-rwx due to c-i-m and the uploader can't do
3020 anything about them and shania will take care of them anyway.
3022 * madison (usage): update usage example to use comma seperation.
3023 * melanie (usage): likewise.
3025 * utils.py (split_args): new function; splits command line
3026 arguments either by space or comma (whichever is used). Also has
3027 optional-but-default DWIM spurious space detection to avoid
3028 'command -a i386, m68k' problems.
3029 (parse_args): use it.
3030 * melanie (main): likewise.
3032 * melanie (main): force the admin to tell someone if we're not
3033 doing a rene-led removal (or closing a bug, which counts as
3036 2003-03-05 James Troup <james@nocrew.org>
3038 * katie.conf (Section): add embedded, gnome, kde, libdevel, perl
3039 and python sections.
3040 * katie.conf-security (Section): likewise.
3042 * add_constraints.sql: add uid and uid_id_seq to grants.
3044 * lisa (determine_new): also warn about adding overrides to
3047 * madison (main): make the -S/--source-and-binary query obey
3048 -s/--suite restrictions.
3050 2003-03-03 James Troup <james@nocrew.org>
3052 * madison (main): if the Archive_Maintenance_In_Progress lockfile
3053 exists, warn the user that our output might seem strange. (People
3054 get confused by multiple versions in a suite which happens
3055 post-kelly but pre-jenna.)
3057 2003-02-21 James Troup <james@nocrew.org>
3059 * kelly (main): we don't need to worry about StableRejector.
3061 * melanie (main): sort versions with apt_pkg.VersionCompare()
3064 * lauren: new script to manually reject packages from
3065 proposed-updates. Updated code from pre-NI kelly (nee katie).
3067 2003-02-20 James Troup <james@nocrew.org>
3069 * kelly (init): remove unused -m/--manual-reject argument.
3071 * katie.py (Katie.force_reject): renamed from force_move to make
3072 it more explicit what this function does.
3073 (Katie.do_reject): update to match.
3075 * utils.py (prefix_multi_line_string): add an optional argument
3076 include_blank_lines which defaults to 0. If non-zero, blank lines
3077 will be includes in the output.
3079 * katie.py (Katie.do_reject): don't add leading space to each line
3080 of the reject message. Include blank lines when showing the
3081 message to the user.
3083 2003-02-19 Martin Michlmayr <tbm@cyrius.com>
3085 * utils.py (fix_maintainer): replace pointless re.sub() with
3086 simple string format.
3088 2003-02-11 James Troup <james@nocrew.org>
3090 * lisa (edit_overrides): only strip-to-one-char and upper-case
3091 non-numeric answers. Fixes editing of items with indices >= 10;
3093 (edit_overrides): correct order of arguments to "not a valid
3094 index" error message.
3096 * jenna (cleanup): call resolve_arch_all_vs_any() rather than
3097 remove_duplicate_versions(); thanks to aj for the initial
3099 (remove_duplicate_versions): correct how we return
3101 (resolve_arch_all_vs_any): arch_all_versions needs to be a list of
3102 a tuple rather than just a tuple.
3104 2003-02-10 James Troup <james@nocrew.org>
3106 * emilie: new script - sync fingerprint and uid tables with a
3109 * init_pool.sql: new table 'uid'; contains user ids. Reference it
3112 * db_access.py (get_or_set_uid_id): new function.
3114 * jennifer (main): update locking to a) not used FCNTL (deprecated
3115 in python >= 2.2) and b) acknowledge upstream's broken
3116 implementation of lockf (see Debian bug #74777), c) try to acquire
3117 the lock non-blocking.
3118 * kelly (main): likewise.
3120 * contrib/python_1.5.2-fcntl_lockf.diff: obsolete, removed.
3122 * madison (main): only append the package to new_packages if it's
3123 not already in there; fixes -S/--source-and-binary for cases where
3124 the source builds a binary package of the same name.
3126 2003-02-10 Anthony Towns <ajt@debian.org>
3128 * madison (main): use explicit JOIN syntax for
3129 -S/--source-and-binary queries to reduce the query's runtime from
3130 >10 seconds to negligible.
3132 2003-02-08 James Troup <james@nocrew.org>
3134 * rene (main): in the NVIU output, append items to lists, not
3135 extend them; fixes amusing suggestion that "g n u m e r i c" (sic)
3138 2003-02-07 James Troup <james@nocrew.org>
3140 * apt.conf (tree "dists/unstable"): Add bzip2-ed Packages and
3143 * pseudo-packages.maintainers (bugs.debian.org): s/Darren
3144 O. Benham/Adam Heath/.
3146 * katie.conf (Suite::Stable::Version): bump to 3.0r1a.
3147 (Suite::Stable::Description): update for 3.0r1a.
3148 (Dinstall::SigningKeyIds): update for 2003 key [aj].
3150 * utils.py (gpgv_get_status_output): rename from
3151 get_status_output().
3153 * neve (check_signature): use gpgv_get_status_output and Dict from
3154 utils(). Add missing newline to error message about duplicate tokens.
3156 * saffron (per_arch_space_use): also print space used by source.
3157 (output_format): correct string.join() invocation.
3159 * jennifer (check_signature): ignored duplicate EXPIRED tokens.
3161 2003-02-04 James Troup <james@nocrew.org>
3163 * cron.buildd: correct generation of Packages/Sources and grep out
3164 non-US/non-free as well as non-free.
3166 2003-02-03 Ryan Murray <rmurray@debian.org>
3168 * cron.buildd: generate quinn-diff output with full Packages/Sources
3169 files to get out-of-date vs. uncompiled right.
3170 * apt.conf.buildd: no longer generate uncompressed files, as they
3171 are generated in cron.buildd instead
3172 * add -i option to quinn-diff to ignore binary-all packages
3173 * apt.conf.buildd: remove and readd udeb to extensions. If the udebs
3174 aren't in the packages file, the arch that uploaded them will build
3177 2003-01-30 James Troup <james@nocrew.org>
3179 * rene (main): only print suggested melanie command when there's
3182 2003-01-30 Ryan Murray <rmurray@debian.org>
3184 * cron.buildd: fix incorrectly inverted lockfile check
3186 2003-01-29 Ryan Murray <rmurray@debian.org>
3188 * cron.buildd: generate override.sid.all3.src
3189 * apt.conf.buildd: use generated override.sid.all3.src
3191 2003-01-27 Martin Michlmayr <tbm@cyrius.com>
3193 * utils.py (get_status_output): moved from jennifer.
3195 (check_signature): likewise.
3197 * jennifer (get_status_output): moved to utils.py.
3199 (check_signature): likewise.
3201 * utils.py (check_signature): add an argument to specifiy which
3202 function to call when an error was found.
3203 (check_signature): document this function better.
3205 * jennifer (check_files): pass the reject function as an argument
3206 to utils.check_signature.
3207 (process_it): likewise.
3209 2003-01-20 James Troup <james@nocrew.org>
3211 * rene (main): lots of changes to improve the output and make it
3214 * katie.py (Katie.check_override): make the override messages
3215 clearer (hopefully).
3217 2002-12-26 James Troup <james@nocrew.org>
3219 * ziyi (usage): document the ability to pass suite(s) as
3221 (main): read apt.conf after checking for -h/--help.
3223 * tea (main): take the check to run as an argument.
3225 * saffron.R: R script to graph daily install runs.
3227 * saffron: new script; various stats functions.
3229 * rhona (main): connect to the database after checking for -h/--help.
3231 * neve (do_da_do_da): if no -a/--action option is given, bail out.
3233 * melanie (main): sort versions with utils.arch_compare_sw().
3235 * madison (usage): alphabetize order of options.
3236 * melanie (usage): likewise.
3238 * kelly (usage): fix usage short description (we aren't dinstall).
3240 * julia (usage): fix usage description and alphabetize order of
3243 * jeri (usage): fix usage short description.
3245 * jennifer (main): move --help and --version checks from here...
3246 (init): to here so that they work with an empty katie.conf.
3249 * alyson (usage): new function.
3261 * apt.conf.stable (tree "dists/stable"): add missing ExtraOverride
3262 entry that caused tasks to be omitted from 3.0r1.
3264 2002-12-10 James Troup <james@nocrew.org>
3266 * jennifer (check_files): sanity check the Depends field to ensure
3267 it's non-empty if present since apt chokes on an empty one.
3268 Thanks to Ryan Murray for the idea.
3270 2002-12-08 James Troup <james@nocrew.org>
3272 * katie.conf-security (Helena::Directories): new; include accepted
3273 in addition to byhand and new.
3275 * helena (process_changes_files): use utils.arch_compare_sw().
3276 Justify things based on the longest [package, version,
3277 architecture]. Reduce '[note]' to '[N]' to save space, and remove
3278 the commas in architecture and version lists for the same reason.
3279 (main): make directories we process configurable through
3280 Helena::Directories in the config file; if that doesn't exist
3281 default to the old hardcoded values (byhand & new).
3283 * utils.py (arch_compare_sw): moved here from madison.
3284 * madison (main): adjust to compensate.
3286 2002-12-06 James Troup <james@nocrew.org>
3288 * ziyi (main): fix "suite foo not in apt.conf" msg to use the
3291 2002-12-05 James Troup <james@nocrew.org>
3293 * katie.conf-non-US (Julia::KnownPostgres): add 'udmsearch'.
3295 2002-11-28 Randall Donald <rdonald@debian.org>
3297 * fernanda.py (read_control): fix typo of 'Architecture'.
3299 2002-11-26 James Troup <james@nocrew.org>
3301 * lisa (check_pkg): call less with '-R' so we see the colour from
3302 Randall's fernanda changes.
3304 * neve (process_sources): if Directory points to a legacy location
3305 but the .dsc isn't there; assume it's broken and look in the pool.
3306 (update_section): new, borroed from alyson.
3307 (do_da_do_da): use it.
3308 (process_packages): add suite_it to the cache key used for
3309 arch_all_cache since otherwise we only add a package to the first
3310 suite it's in and ignore any subsequent ones.
3312 * katie.conf-non-US (Location): fixed to reflect reality (all
3313 suites, except old-proposed-updates (which is legacy-mixed)) are
3316 * utils.py (try_with_debug): wrapper for print_exc().
3317 * jenna (main): use it.
3318 * neve (main): likewise.
3320 2002-11-25 Randall Donald <rdonald@debian.org>
3322 * fernanda.py (main): added -R to less command line for raw control
3323 character support to print colours
3324 (check_deb): Instead of running dpkg -I on deb file, call
3325 output_deb_info, the new colourized control reporter.
3326 (check_dsc): add call to colourized dsc info reader, read_dsc, instead
3327 of printing out each .dsc line.
3328 (output_deb_info): new function. Outputs each key/value pair from
3329 read_control except in special cases where we highlight section,
3330 maintainer, architecture, depends and recommends.
3331 (create_depends_string): new function. Takes Depends tree and looks
3332 up it's compontent via projectb db, colourizes and constructs a
3333 depends string in original order.
3334 (read_dsc): new function. reads and parses .dsc info via
3335 utils.parse_changes. Build-Depends and Build-Depends-Indep are
3337 (read_control): new function. reads and parses control info via
3338 apt_pkg. Depends and Recommends are split in to list structures,
3339 Section and Architecture are colourized. Maintainer is colourized
3340 if it has a localhost.localdomain address.
3341 (split_depends): new function. Creates a list of lists of
3342 dictionaries of depends (package,version relation). Top list is
3343 colected from comma delimited items. Sub lists are | delimited.
3344 (get_comma_list): new function. splits string input among commas
3345 (get_or_list): new function. splits string input among | delimiters
3346 (get_depends_parts): new function. Creates dictionary of package name
3347 and version relation from dependancy string.
3348 Colours for section and depends are per component. Unfound depends
3349 are in bold. Lookups using version info is not supported yet.
3351 2002-11-22 James Troup <james@nocrew.org>
3353 * katie.conf-security (Julia::KnownPostgres): add 'www-data' and
3356 * amber (make_advisory): string.atol() is deprecated and hasn't
3357 been ported to string methods. Use long() instead.
3359 * init_pool.sql: explicitly specify the encoding (SQL_ASCII) when
3360 creating the database since we'll fail badly if it's created with
3361 e.g. UNICODE encoding.
3363 * rose (main): AptCnf is a global.
3365 * neve (get_location_path): new function determines the location
3366 from the the first (left-most) directory of a Filename/Directory.
3367 (process_sources): don't need 'location' anymore. Use
3368 utils.warn(). Use the Directory: field for each package to find
3369 the .dsc. Use get_location_path() to determine the location for
3371 (process_packages): do't need 'location' anymore. Use
3372 utils.warn(). Use get_location_path().
3373 (do_sources): don't need 'location', drop 'prefix' in favour of
3374 being told the full path to the Sources file, like
3376 (do_da_do_da): main() renamed, so that main can call us in a
3377 try/except. Adapt for the changes in do_sources() and
3378 process_packages() above. Assume Sources and Packages file are in
3379 <root>/dists/<etc.>. Treat pool locations like we do legacy ones.
3381 * katie.conf-security (Location): fixed to reflect reality (all
3382 suites are pool, not legacy).
3384 * utils.py (print_exc): more useful (i.e. much more verbose)
3385 traceback; a recipe from the Python cookbook.
3386 * jenna (main): use it.
3387 * neve (main): likewise.
3389 2002-11-19 James Troup <james@nocrew.org>
3391 * kelly (install): fix brain-damaged CopyChanges/CopyKatie
3392 handling which was FUBAR for multi-suite uploads. Now we just
3393 make a dictionary of destinations to copy to and iterate over
3396 * fernanda.py (check_deb): run linda as well as lintian.
3398 2002-10-21 James Troup <james@nocrew.org>
3400 * melanie (main): change X-Melanie to X-Katie and prefix it with
3403 * lisa (main): prefix X-Katie with 'lisa '.
3405 * jennifer (clean_holding): fix typo in string method changes;
3406 s/file.find(file/file.find(/.
3408 * cron.daily: invoke helena and send the report to ftpmaster.
3409 * cron.daily-non-US: likewise.
3411 2002-10-16 James Troup <james@nocrew.org>
3413 * kelly (check): call reject() with a blank prefix when parsing
3414 the return of check_dsc_against_db() since it does its own
3417 * rose: new script; only handles directory creation initally.
3419 * katie.conf (Dinstall::NewAckList): obsolete, removed.
3420 * katie.conf-non-US (Dinstall::NewAckList): likewise.
3422 2002-10-06 James Troup <james@nocrew.org>
3424 * rene (main): remove bogus argument handling.
3426 * kelly: katie, renamed.
3427 * cron.daily: adapt for katie being renamed to kelly.
3428 * cron.daily-non-US: likewise.
3429 * amber (main): likewise.
3431 * Changes for python 2.1.
3433 * kelly: time.strftime no longer requires a second argument of
3434 "time.localtime(time.time())".
3435 * logging.py: likewise.
3437 * shania (init): likewise.
3439 * amber: use augmented assignment.
3440 * catherine (poolize): likewise.
3441 * claire.py (fix_component_section): likewise.
3442 * halle (check_changes): likewise.
3445 * jennifer: likewise.
3447 * katie.py: likewise.
3450 * madison (main): likewise.
3451 * melanie: likewise.
3452 * natalie: likewise.
3456 * utils.py: likewise.
3459 * amber: use .endswith.
3460 * fernanda.py: likewise.
3461 * halle (main): likewise.
3462 * jennifer: likewise.
3464 * katie.py: likewise.
3468 * shania (main): likewise.
3469 * utils.py: likewise.
3471 * alyson: use string methods.
3475 * catherine: likewise.
3476 * charisma: likewise.
3477 * claire.py: likewise.
3478 * db_access.py: likewise.
3484 * jennifer: likewise.
3487 * katie.py: likewise.
3490 * logging.py: likewise.
3491 * madison: likewise.
3492 * melanie: likewise.
3493 * natalie: likewise.
3497 * utils.py: likewise.
3500 2002-09-20 Martin Michlmayr <tbm@cyrius.com>
3502 * utils.py (parse_changes): use <string>.startswith() rather than
3505 2002-08-27 Anthony Towns <ajt@debian.org>
3507 * katie.py (in_override_p): when searching for a source override,
3508 and the dsc query misses, search for both udeb and deb overrides
3509 as well. Should fix the UNACCEPT issues with udebs.
3511 2002-08-24 James Troup <james@nocrew.org>
3513 * melanie (main): remove gratuitous WHERE EXISTS sub-select from
3514 source+binary package finding code which was causing severe
3515 performance degradation with postgres 7.2.
3517 2002-08-14 James Troup <james@nocrew.org>
3519 * julia (main): use the pwd.getpwall() to get system user info
3520 rather than trying to read a password file. Add a -n/--no-action
3523 * cron.hourly: julia no longer takes any arguments.
3524 * cron.hourly-non-US: likewise.
3526 2002-08-07 James Troup <james@nocrew.org>
3528 * katie (install): handle multi-suite uploads when CopyChanges
3529 and/or CopyKatie are in use, ensuring we only copy stuff once.
3531 2002-08-01 Ryan Murray <rmurray@debian.org>
3533 * wanna-build/trigger.daily: initial commit, with locking
3534 * cron.buildd: add locking against daily run
3536 2002-07-30 James Troup <james@nocrew.org>
3538 * melanie (main): readd creation of suite_ids_list so melanie is
3539 remotely useful again.
3541 * katie.conf: adopt for woody release; diable
3542 StableDislocationSupport, add oldstable, adjust other suites and
3543 mappings, fix up location.
3544 * katie.conf-non-US: likewise.
3545 * katie.conf-security: likewise.
3547 * apt.conf.stable: adapt for woody release; add oldstable, adjust
3549 * apt.conf.stable-non-US: likewise.
3551 * apt.conf-security: adapt for woody release; adding oldstable,
3552 oldstable, adjust stable and testing.
3553 * cron.daily-security: likewise.
3554 * cron.buildd-security: likewise.
3556 * apt.conf: adapt for woody release; rename woody-proposed-updates
3557 to testing-proposed-updates and proposed-updates to
3558 old-proposed-updates.
3559 * apt.conf-non-US: likewise.
3561 * vars-non-US (copyoverrides): add sarge.
3562 * vars (copyoverrides): likewise.
3564 * vars-security (suites): add oldstable.
3566 2002-07-22 Ryan Murray <rmurray@debian.org>
3568 * apt.conf.security-buildd: use suite codenames instead of
3571 2002-07-16 James Troup <james@nocrew.org>
3573 * denise (main): fix filenames for testing override files.
3575 2002-07-14 James Troup <james@nocrew.org>
3577 * jennifer (process_it): call check_md5sums later so we can check
3578 files in the .dsc too
3579 (check_md5sums): check files in the .dsc too. Check both md5sum
3582 * melanie (main): use parse_args() and join_with_commas_and() from
3583 utils. If there's nothing to do, say so and exit, don't ask for
3586 * amber (join_with_commas_and): moved from here to ...
3587 * utils.py (join_with_commas_and): here.
3589 2002-07-13 James Troup <james@nocrew.org>
3591 * madison (main): use parse_args() from utils. Support
3594 * jenna (parse_args): moved from here to ...
3595 * utils.py (parse_args): here.
3597 * katie.conf (Architectures): minor corrections to the description
3598 for arm, mips and mipsel.
3599 * katie.conf-non-US (Architectures): likewise.
3600 * katie.conf-security (Architectures): likewise.
3602 * cron.daily-security: use natalie's new -a/--add functionality to
3603 flesh out the security overrides.
3605 2002-07-12 James Troup <james@nocrew.org>
3607 * cron.buildd (ARCHS): add arm.
3609 * katie.conf: 2.2r7 was released.
3610 * katie.conf-non-US: likewise.
3612 * utils.py (parse_changes): handle a multi-line field with no
3615 2002-06-25 James Troup <james@nocrew.org>
3617 * templates/amber.advisory (To): add missing email address since
3618 __WHOAMI__ is only a name.
3620 * katie.conf-security (Melane::LogFile): correct to go somewhere
3621 katie has write access to.
3622 (Location::/org/security.debian.org/ftp/dists/::Suites): add
3625 * natalie: add support for -a/-add which adds packages only
3626 (ignoring changes and deletions).
3628 * katie.py (Katie.announce): Dinstall::CloseBugs is a boolean so
3631 2002-06-22 James Troup <james@nocrew.org>
3633 * jennifer (check_files): validate the package name and version
3634 field. If 'Package', 'Version' or 'Architecture' are missing,
3635 don't try any further checks.
3636 (check_dsc): likewise.
3638 * utils.py (re_taint_free): add '~' as a valid character.
3640 2002-06-20 Anthony Towns <ajt@debian.org>
3642 * katie.conf-non-US: add OverrideSuite for w-p-u to allow uploads
3644 2002-06-09 James Troup <james@nocrew.org>
3646 * jennifer (check_files): reduce useless code.
3648 * cron.daily-security: run symlinks -dr on $ftpdir.
3650 * vars-security (ftpdir): add.
3652 2002-06-08 James Troup <james@nocrew.org>
3654 * neve (update_override_type): transaction is handled higher up in
3656 (update_priority): likewise.
3657 (process_sources): remove code that makes testing a duplicate of
3659 (process_packages): likewise.
3661 * templates/amber.advisory: add missing mail headers.
3663 * cron.daily-security: also call apt-ftparchive clean for
3664 apt.conf.buildd-security.
3665 * cron.weekly: likewise.
3667 * amber (do_upload): write out a list of source packages (and
3668 their version) uploaded for testing.
3669 (make_advisory): add more Subst mappings for the mail headers.
3670 (spawn): check for suspicious characters in the command and abort
3673 2002-06-07 James Troup <james@nocrew.org>
3675 * ziyi (main): remove the 'nonus'/'security' hacks and use
3676 Dinstall::SuiteSuffix (if it exists) instead. Always try to write
3677 the lower level Release files, even if they don't exist. fubar
3678 out if we can't open a lower level Release file for writing.
3680 * katie.conf-non-US (Dinstall): add SuiteSuffix, used to simplify
3682 * katie.conf-security (Dinstall): likewise.
3684 * amber (do_upload): renamed from get_file_list(). Determine the
3685 upload host from the original component.
3686 (init): Add a -n/--no-action option. Fix how we get changes_files
3687 (i.e. from the return value of apt_pkg.ParseCommandLine(), not
3688 sys.argv). Add an Options global.
3689 (make_advisory): support -n/--no-action.
3692 (usage): document -n/--no-action.
3694 * cron.buildd-security: fix path to Packages-arch-specific in
3695 quinn-diff invocation.
3697 * katie.conf-security (Dinstall::AcceptedAutoBuildSuites): change
3698 to proper suite names (i.e. stable, testing) rather than codenames
3700 (Dinstall::DefaultSuite): likewise.
3702 (Location::/org/security.debian.org/ftp/dists/::Suites): likewise.
3703 * vars-security (suites): likewise.
3704 * apt.conf-security: likewise.
3706 * katie.conf-security (Component): add "updates/" prefix.
3707 (Suite::*::Components): likewise.
3708 (ComponentMappings): new; map all {ftp-master,non-US} components
3711 * katie.conf-security (Natalie): removed; the options have
3712 defaults and ComponentPosition is used by alyson which doesn't
3713 work on security.d.o.
3714 (Amber): replace UploadHost and UploadDir with ComponentMappings
3715 which is a mapping of components -> URI.
3716 (Suite::*::CodeName): strip bogus "/updates" suffix hack.
3717 (SuiteMappings): use "silent-map" in preference to "map".
3719 * cron.unchecked-security: fix call to cron.buildd-security.
3721 * cron.daily-security: map local suite (stable) -> override suite
3722 (potato) when fixing overrides. Correct component in natalie call
3723 to take into account "updates/" prefix. Fix cut'n'waste in
3724 override.$dist.all3 generation, the old files weren't being
3725 removed, so they were endlessly growing.
3727 * neve (main): don't use .Find for the CodeName since we require
3728 it. Location::*::Suites is a ValueList.
3729 (check_signature): ignore duplicate SIGEXPIRED tokens. Don't bomb
3730 out on expired keys, just warn.
3731 (update_override_type): new function; lifted from alyson.
3732 (update_priority): likewise.
3733 (main): use update_{override_type,priority}().
3735 * jennifer (check_distributions): remove redunant test for
3736 SuiteMappings; ValueList("does-not-exist") returns [] which is
3737 fine. Add support for a "silent-map" type which doesn't warn
3738 about the mapping to the user.
3739 (check_files): add support for ComponentMappings, similar to
3740 SuiteMappings, but there's no type, just a source and a
3741 destination and the original component is stored in "original
3743 * katie.py (Katie.dump_vars): add "original component" as an
3744 optionsal files[file] dump variable.
3746 * claire.py (find_dislocated_stable): dehardcode 'potato' in SQL
3747 query. Add support for section-less legacy locations like current
3748 security.debian.org through YetAnotherConfigBoolean
3749 'LegacyStableHasNoSections'.
3750 * katie.conf-security (Dinstall): LegacyStableHasNoSections is true.
3752 * utils.py (real_arch): moved here from ziyi.
3753 * ziyi (real_arch): moved to utils.py.
3754 * ziyi (main): likewise.
3756 * claire.py (find_dislocated_stable): use real_arch() with
3757 filter() to strip out source and all.
3758 * neve (main): likewise.
3759 * rene (main): likewise.
3760 * jeri (parse_packages): likewise.
3762 2002-06-06 James Troup <james@nocrew.org>
3764 * tea (check_missing_tar_gz_in_dsc): modifed patch from Martin
3765 Michlmayr <tbm@cyrius.com> to be more verbose about what we're
3768 2002-05-23 Martin Michlmayr <tbm@cyrius.com>
3770 * jeri (check_joey): check if the line contains two elements
3771 before accessing the second. Also, strip trailing spaces as well
3773 * halle (check_joey): likewise.
3775 2002-06-05 James Troup <james@nocrew.org>
3777 * cron.unchecked-security: new file; like cron.unchecked but if
3778 there's nothing to do exit so we don't call cron.buildd-security.
3780 * apt.conf.buildd-security: new file.
3782 * vars (archs): alphabetize.
3783 * vars-non-US (archs): likewise.
3785 * vars-security: add unchecked.
3787 * madison (main): reduce rather bizarrely verbose and purposeless
3788 code to print arches to a simple string.join.
3790 * katie.conf (Suites::Unstable): add UdebComponents, a new
3791 valuelist of suites, used by jenna to flesh out the list of
3792 <suite>_main-debian-installer-binary-<arch>.list files generated.
3793 (Dinstall): add StableDislocationSupport, a new boolean used by
3794 jenna to enable or disable stable dislocation support
3795 (i.e. claire), as true.
3797 * katie.conf (Dinstall): add StableDislocationSupport, a new
3798 boolean used by jenna to enable or disable stable dislocation
3799 support (i.e. claire), as true.
3800 * katie.conf-non-US: likewise.
3801 * katie.conf-security: likewise.
3803 * cron.daily-security: generate .all3 overrides for the buildd
3804 support. Freshen a local copy of Packages-arch-specific from
3807 * claire.py (find_dislocated_stable): disable the support for
3808 files in legacy-mixed locations since none of the Debian archives
3811 * helena: new script; produces a report on NEW and BYHAND
3814 * jenna: rewritten from scratch to fix speed problems. Run time
3815 on auric goes down from 31.5 minutes to 3.5 minutes. Of that 3.5
3816 minutes, 105 seconds are the monster query and 70 odd seconds is
3819 * apt.conf.buildd (Default): remove MaxContentsChange as it's
3822 2002-06-05 Ryan Murray <rmurray@debian.org>
3824 * cron.buildd-security: new file.
3826 2002-06-05 Matt Kraai <kraai@alumni.cmu.edu>
3828 * denise (list): take a file argument and use it.
3829 (main): don't abuse sys.stdout, just write to the file.
3831 * claire.py (usage): Fix misspelling.
3832 (clean_symlink): Simplify.
3833 (find_dislocated_stable): Avoid unnecessary work.
3835 2002-05-29 James Troup <james@nocrew.org>
3837 * cameron: removed; apt-ftparchive can simply walk the directory.
3839 2002-05-26 Anthony Towns <ajt@debian.org>
3841 * katie.conf{,-non-US}: Map testing to testing-proposed-updates
3842 for the autobuilders.
3844 2002-05-24 Ryan Murray <rmurray@debian.org>
3846 * cron.buildd: update override files before running apt-ftparchive
3848 2002-05-23 Martin Michlmayr <tbm@cyrius.com>
3850 * amber (main): remove extra space in prompt.
3852 * utils.py (validate_changes_file_arg): use original filename in
3855 * jeri (check_joey): close file after use.
3856 (parse_packages): likewise.
3857 (main): setup debug option properly.
3859 * melanie (main): remove unused packages variable and simplify the
3860 code to build up con_packages by using repr().
3862 2002-05-23 James Troup <james@nocrew.org>
3864 * lisa (recheck): when we reject, also return 0 so the package is
3866 (sg_compare): fix note sorting.
3867 (recheck): remove the .katie file after rejection.
3869 * katie.py (Katie.accept): accepted auto-build support take 3;
3870 this time adding support for security. Security needs a) non-pool
3871 files copied rather than symlinked since accepted is readable only
3872 by katie/security and www-data needs to be able to see the files,
3873 b) needs per-suite directories. SpecialAcceptedAutoBuild becomes
3874 AcceptedAutoBuildSuites and is a ValueList containing the suites.
3875 SecurityAcceptedAutoBuild is a new boolean which controls whether
3876 or not normal or security style is used. The unstable_accepted
3877 table was renamed to accepted_autobuild and a suite column added.
3878 Also fix a bug noticed by Ryan where an existent orig.tar.gz
3879 didn't have it's last_used/in_accepted flags correctly updated.
3880 * katie (install): likewise.
3881 * rhona (clean_accepted_autobuild): likewise.
3883 2002-05-22 James Troup <james@nocrew.org>
3885 * lisa (sort_changes): new function; sorts changes properly.
3887 (sg_compare): new function; helper for sort_changes(). Sorts by
3888 have note and time of oldest upload.
3889 (indiv_sg_compare): new function; helper for sort_changes().
3890 Sorts by source version, have source and filename.
3891 (main): use sort_changes().
3892 (changes_compare): obsoleted; removed.
3894 2002-05-20 James Troup <james@nocrew.org>
3896 * rhona (clean_accepted_autobuild): don't die if a file we're
3897 trying to remove doesn't exist. Makes rhona more friendly to
3898 katie/katie.py crashes/bugs without any undue cost.
3900 2002-05-19 James Troup <james@nocrew.org>
3902 * lisa (main): if sorting a large number of changes give some
3904 (recheck): new function, run the same checks (modulo NEW,
3905 obviously) as katie does, if they fail do the standard
3906 reject/skip/quit dance.
3909 * katie (install): don't try to unlink the symlink in the
3910 AcceptedAutoBuild support if the destination is not a symlink (or
3911 doesn't exist). Avoids unnecessary bombs on previous partial
3912 accepts and will still bomb hard if the file exists and isn't a
3915 * utils.py: blah, commands _is_ used when the mail stuff isn't
3916 commented out like it is in my test environment.
3918 * lisa (changes_compare): "has note" overrides everything else.
3919 Use .katie files rather than running parse_changes, faster and
3920 allows "has note" to work. Correct version compare, it was
3921 reversed. Ctime check should only kick in if the source packages
3923 (print_new): print out and return any note. Rename 'ret_code' to
3925 (edit_new): renamed from spawn_editor. Don't leak file
3926 descriptors. Clean up error message if editor fails.
3927 (edit_note): new function, allows one to edit notes.
3928 (do_new): add note support, editing and removing.
3929 (init): kill -s/--sort; with notes we always want to use our
3933 * katie.py (Katie.dump_vars): add "lisa note" as an optional
3936 * utils.py (build_file_list): rename 'dsc' to 'is_a_dsc' and have
3937 it default to 0. Adapt tests to assume it's boolean.
3938 * fernanda.py (check_changes): adjust call appropriately.
3939 * halle (check_changes): likewise.
3940 * jennifer (check_changes): likewise.
3941 * jeri (check_changes): likewise.
3942 * shania (flush_orphans): likewise.
3944 * jennifer (check_dsc): pass is_a_dsc by name when calling
3945 build_file_list() for clarity.
3946 * shania (flush_orphans): likewise.
3947 * tea (check_missing_tar_gz_in_dsc): likewise.
3949 * jennifer (check_dsc): pass dsc_whitespace_rules by name when
3950 calling parse_changes() for clarity.
3951 * tea (check_dscs): likewise.
3953 * utils.py (parse_changes): make dsc_whitespace_rules default to
3955 * halle (check_changes): adjust call appropriately.
3956 * jennifer (check_changes): likewise.
3957 * jeri (check_changes): likewise.
3958 * lisa (changes_compare): likewise.
3959 * utils.py (changes_compare): likewise.
3960 * melanie (main): likewise.
3961 * shania (flush_orphans): likewise.
3962 * fernanda.py (check_changes): likewise.
3964 2002-05-18 James Troup <james@nocrew.org>
3966 * katie.py (Katie.dump_vars): make the .katie file unreadable,
3967 it's not useful and by and large a duplication of information
3968 available in readable format in other files.
3970 2002-05-16 Ryan Murray <rmurray@debian.org>
3972 * melanie: Dir::TemplatesDir -> Dir::Templates
3974 2002-05-15 Ryan Murray <rmurray@debian.org>
3976 * cameron: correct the use of os.path.join
3978 2002-05-15 Anthony Towns <ajt@debian.org>
3980 * ziyi: Update to match the new format for Architectures/Components
3983 2002-05-14 James Troup <james@nocrew.org>
3985 * amber: new script; 'installer' wrapper script for the security
3988 * katie.py (Katie.announce): remove unused 'dsc' local
3989 variable. (pychecker)
3991 * ziyi: pre-define AptCnf and out globals to None. (pychecker)
3993 * neve: don't import sys, we don't use it. (pychecker)
3994 (check_signature): fix return type mismatch. (pychecker)
3996 * utils.py: don't import commands, we don't use it. (pychecker)
3998 * katie (install): SpecialAcceptedAutoBuild is a boolean.
4000 * katie.py (Katie.dump_vars): don't store "oldfiles", it's
4001 obsoleted by the change to "othercomponents" handling in jennifer
4003 (Katie.cross_suite_version_check): new function; implements
4004 cross-suite version checking rules specified in the conf file
4005 while also enforcing the standard "must be newer than target
4007 (Katie.check_binary_against_db): renamed, since it's invoked once
4008 per-binary, "binaries" was inaccurate. Use
4009 cross_suite_version_check() and don't bother with the "oldfiles"
4010 rubbish as jennifer works out "othercomponents" herself now.
4011 (Katie.check_source_against_db): use cross_suite_version_check().
4013 * katie (check): the version and file overwrite checks
4014 (check_{binary,source,dsc}_against_db) are not per-suite.
4016 * jennifer (check_files): less duplication of
4017 'control.Find("Architecture", "")' by putting it in a local
4019 (check_files): call check_binary_against_db higher up since it's
4020 not a per-suite check.
4021 (check_files): get "othercomponents" directly rather than having
4022 check_binary_against_db do it for us.
4024 * heidi (main): 'if x:', not 'if x != []:'.
4025 * katie.py (Katie.in_override_p): likewise.
4026 (Katie.check_dsc_against_db): likewise.
4027 * natalie (main): likewise.
4028 * rene (main): likewise.
4029 * ziyi (real_arch): likewise.
4031 * alyson (main): Suite::%s::Architectures, Suite::%s::Components
4032 and OverrideType are now value lists, not lists.
4033 * andrea (main): likewise.
4034 * cindy (main): likewise.
4035 * claire.py (find_dislocated_stable): likewise.
4036 * denise (main): likewise.
4037 * jenna (main): likewise.
4038 * jennifer (check_distributions): likewise.
4039 (check_files): likewise.
4040 (check_urgency): likewise (Urgency::Valid).
4041 * jeri (parse_packages): likewise.
4042 * neve (main): likewise (and Location::%s::Suites).
4043 * rene (main): likewise.
4045 2002-05-13 James Troup <james@nocrew.org>
4047 * katie.py (Katie.check_source_against_db): correct case of reject
4048 message to be consistent with binary checks.
4050 * jennifer (get_status_output): don't leak 2 file descriptors per
4052 (check_signature): add missing '\n' to "duplicate status token"
4055 2002-05-09 James Troup <james@nocrew.org>
4057 * utils.py (validate_changes_file_arg): new function; validates an
4058 argument which should be a .changes file.
4059 * ashley (main): use it.
4060 * lisa (main): likewise.
4062 * katie.py (Katie.check_dsc_against_db): since there can be more
4063 than one .orig.tar.gz make sure we don't assume the .orig.tar.gz
4064 entry still exists in files.
4066 * jennifer (check_dsc): handle the .orig.tar.gz disappearing from
4067 files, since check_dsc_against_db() deletes the .orig.tar.gz
4070 * cameron: cleanups.
4072 * utils.py (changes_compare): change sort order so that source
4073 name and source version trump 'have source'; this should fix
4074 UNACCEPT problems in katie where -1 hppa+source & i386, -2
4075 i386&source & hppa lead to -1 i386 unaccept. Problem worked out
4078 * lisa (main): allow the arguments to be .katie files too.
4080 2002-05-07 Ryan Murray <rmurray@debian.org>
4082 * cron.buildd: add s390 to arch list again
4084 2002-05-05 Ryan Murray <rmurray@debian.org>
4086 * cron.buildd: new script, update w-b database from unstable_accepted
4088 * cameron: new script, take list in unstable_accepted and write out
4089 a file list for apt-ftparchive
4090 * apt.conf.buildd: new apt configuration for Packages/Sources for
4092 * vars: add s390 to arch list.
4094 2002-05-03 James Troup <james@nocrew.org>
4096 * neve (main): don't hard code the calling user as that doesn't
4097 work with modern postgres installs. Fix psql invocation for
4098 init_pool.sql (database name required). Dont' hard code the
4100 (process_sources): add support for fingerprint and install_date.
4101 (process_packages): add support for fingerprint.
4102 (do_sources): pass in the directory, fingerprint support needs it.
4103 (get_status_output): borrowed from jennifer.
4105 (check_signature): likewise.
4107 * katie (install): only try to log urgencies if Urgency_Logger is
4109 (main): only initialize Urgency_Logger is Dir::UrgencyLog is
4110 defined; only close Urgency_Logger if it's defined.
4112 * catherine (poolize): adapt for Dir rationalization.
4113 * claire.py (find_dislocated_stable): likewise.
4114 * denise (main): likewise.
4115 * halle (check_joey): likewise.
4117 * jennifer: likewise.
4119 * katie.py: likewise.
4121 * lisa (do_bxa_notification): likewise.
4122 * logging.py (Logger.__init__): likewise
4123 * rene (main): likewise.
4124 * rhona (clean): likewise.
4125 * shania (init): likewise.
4129 * lisa (add_overrides): Dinstall::BXANotify is a boolean, use
4132 * rhona (clean_accepted_autobuild): SpecialAcceptedAutoBuild is a
4133 boolean, use FindB, not get.
4135 * katie.py (Katie.check_dsc_against_db): ignore duplicate
4136 .orig.tar.gz's which are an exact (size/md5sum) match.
4138 * ashley (main): really allow *.katie files as arguments too;
4141 * sql-aptvc.cpp: postgres.h moved to a "server" subdirectory.
4143 2002-05-03 Anthony Towns <ajt@debian.org>
4145 * ziyi: support for security.
4147 2002-05-02 James Troup <james@nocrew.org>
4149 * jennifer (accept): call Katie.check_override() unconditional as
4150 no-mail check moved into that function.
4151 (do_byhand): likewise.
4153 * katie.py (Katie.check_override): don't do anything if we're a)
4154 not sending mail or b) the override disparity checks have been
4155 disbled via Dinstall::OverrideDisparityCheck.
4157 * jennifer (check_files): don't hard code Unstable as the suite
4158 used to check for architecture validity; use
4159 Dinstall::DefaultSuite instead, if it exists.
4160 (accept): conditionalize
4162 * katie.py (Katie.update_subst): support global maintainer
4163 override with Dinstall::OverrideMaintainer.
4165 * jennifer (check_distributions): new function, Distribution
4166 validation and mapping. Uses new SuiteMappings variable from
4167 config file to abstract suite mappings.
4168 (check_changes): call it.
4170 * natalie: renamed; nothing imports or likely will for some time.
4172 * denise (main): remove unused natalie import and init().
4174 * natalie.py (init): removed.
4175 (main): initalize here instead and don't hardcode the database
4178 2002-04-30 James Troup <james@nocrew.org>
4180 * katie.py (Katie.close_bugs): new function, split out from
4182 (Katie.announce): only call close_bugs() if Dinstall::CloseBugs is
4184 (Katie.close_bugs): new function, split out
4185 (Katie.close_bugs): return immediately if there are no bugs to
4188 * jennifer (acknowledge_new): adapt for new utils.TemplateSubst().
4189 * katie (do_reject): likewise.
4190 (stable_install): likewise.
4191 * katie.py (Katie.announce): likewise.
4192 (Katie.accept): likewise.
4193 (Katie.check_override): likewise.
4194 (Katie.do_reject): likewise.
4195 * lisa (do_bxa_notification): likewise.
4196 * melanie (main): likewise.
4198 * utils.py (TemplateSubst): change second argument to be a
4199 filename rather than a template since every caller opened a file
4200 on the fly which was ugly and leaked file descriptor.
4202 2002-04-29 James Troup <james@nocrew.org>
4204 * katie.py (Katie.announce): (modified) patch from Raphael Hertzog
4205 <hertzog@debian.org> to send 'accepted' announce mails to the
4208 2002-04-24 James Troup <james@nocrew.org>
4210 * init_pool.sql (unstable_accepted): add two new fields to
4211 unstable_accepted; in_accepted is a boolean indicating whether or
4212 not the file is in accepted and last_used is a timestamp used by
4213 rhona to determine when to remove symlinks for installed packages.
4215 * katie.py (Katie.accept): auto-build support take 2. Create
4216 symlinks for all files into a seperate directory. Add files to
4217 unstable_accepted as paths to the new directory; mark them as
4218 being in accepted for cameron. Properly conditionalize it on a
4219 configuration variable.
4221 * katie (install): likewise. Update symlinks to point into the
4222 pool; mark the files for later deletion by rhona and mark them as
4223 not being in accepted for cameron.
4225 * rhona (clean_accepted_autobuild): new function.
4227 2002-04-22 James Troup <james@nocrew.org>
4229 * jennifer (check_files): handle db_access.get_location_id()
4230 returning -1 properly/better.
4232 * rhona (clean_fingerprints): new function.
4234 2002-04-21 James Troup <james@nocrew.org>
4236 * utils.py (touch_file): unused; remove.
4239 * jennifer (check_files): close file descriptor used to get the
4241 (check_md5sums): likewise.
4242 (callback): likewise.
4244 * katie.py (Katie.do_reject): handle manual rejects much better;
4245 call the editor first and get confirmation from the user before
4248 * jennifer (check_signature): prefix_multi_line_string() moved to
4251 * utils.py (prefix_multi_line_string): moved here from jennifer.
4253 2002-04-20 James Troup <james@nocrew.org>
4255 * lisa (main): handle non-existent files.
4257 * ashley (main): allow *.katie files as arguments too.
4259 2002-04-19 James Troup <james@nocrew.org>
4261 * katie.py (Katie.accept): add stuff to help auto-building from
4262 accepted; if the .orig.tar.gz is not part of the upload (i.e. it's
4263 in the pool), create a symlink to it in the accepted directory and
4264 add the .dsc and .{u,}deb(s) to a new 'unstable_accepted' table.
4266 * katie (install): undo the "auto-building from accepted" stuff
4267 (i.e. remove the .orig.tar.gz symlink and remove the files from
4268 unstable_accepted table).
4270 2002-04-16 James Troup <james@nocrew.org>
4272 * jennifer (upload_too_new): fix typo which was causing all
4273 timestamp comparisons to be against the .changes file. Also move
4274 back to the original directory so we do the comparisons against
4275 accurate timestamps.
4277 * tea (check_missing_tar_gz_in_dsc): new function.
4279 * jennifer (check_dsc): add a check to ensure there is a .tar.gz
4280 file mentioned in the .dsc.
4282 * lisa (main): use X-Katie in the mail headers, not X-Lisa; that
4283 way mails reach debian-{devel-,}changes@l.d.o.
4285 2002-04-02 Ryan Murray <rmurray@debian.org>
4287 * cron.daily: run shania after rhona
4288 * cron.daily-non-US: likewise.
4290 2002-04-01 James Troup <james@nocrew.org>
4292 * katie: re-add proposed-updates/stable install support.
4294 * katie.py (Katie.dump_vars): add changes["changes"] as an
4295 optional field; should be mandatory later.
4297 2002-03-31 James Troup <james@nocrew.org>
4299 * katie (install): support a Suite::<foo>::CopyKatie similar to
4300 CopyChanges. Done seperately because .katie files don't need to
4301 be mirrored and will probably be copied to another directory as a
4304 * halle (main): add missing debug to options.
4306 2002-03-29 James Troup <james@nocrew.org>
4308 * madison (main): add a -r/--regex option.
4310 2002-03-26 James Troup <james@nocrew.org>
4312 * lisa: don't trample on changes["distribution"]; make a copy of
4313 it as changes["suite"] instead and use that.
4315 2002-03-16 Anthony Towns <ajt@debian.org>
4317 * templates/lisa.bxa_notification: Fix some grammatical errors.
4318 Encourage contact via bxa@ftp-master email address.
4320 2002-03-15 James Troup <james@nocrew.org>
4322 * jennifer (check_timestamps): remove bogus raise in except.
4324 2002-03-15 Anthony Towns <ajt@debian.org>
4326 * cron.monthly: rotate mail/archive/bxamail as well as
4327 mail/archive/mail. This is for a complete archive of
4328 correspondence with the BXA.
4330 2002-03-14 Anthony Towns <ajt@debian.org>
4332 * crypto-in-main changes.
4334 * utils.py (move, copy): add an optional perms= parameter to let you
4335 set the resulting permissions of the moved/copied file
4336 * katie.py (force_move): rejected/morgued files should be unreadable
4337 * jennifer (do_byhand, acknowledge_new): pending new and byhand files
4338 should be unreadable.
4340 2002-03-07 Ryan Murray <rmurray@debian.org>
4342 * katie (install): check for existance of "files id" key as well as
4343 it being set to a valid value.
4344 * katie (install): check for existense and valid value for location
4347 2002-03-05 Ryan Murray <rmurray@debian.org>
4349 * katie.py (do_reject): reread the reason file after editing it.
4351 2002-02-25 James Troup <james@nocrew.org>
4353 * jennifer (check_changes): don't enforce sanity in .changes file
4354 names since it doesn't seem to be possible; pcmica-cs and similar
4355 freak show packages in particular cause real problems.
4357 * katie.py (Katie.check_dsc_against_db): initialize 'found' for
4358 each dsc_file since the .orig.tar.gz checking code now uses it as
4359 a boolean. Fixes bizarro rejections which bogusly claimed
4360 .diff.gz md5sum/size was incorrect.
4362 2002-02-24 James Troup <james@nocrew.org>
4364 * katie (process_it): reset reject_message.
4366 2002-02-22 James Troup <james@nocrew.org>
4368 * db_access.py(set_files_id): disable use of
4369 currval('files_id_seq') because it was taking 3 seconds on auric
4370 which is insane (most calls take < 0.01) and simply call
4371 get_files_id() for the return value instead.
4373 * katie.py (Katie.do_query): convenience function; unused by
4374 default, useful for profiling.
4375 * db_access.py (do_query): likewise.
4377 * katie (install): fix insert SQL call when binary has no source.
4379 * lisa (determine_new): auto-correct non-US/main to non-US.
4380 (determine_new): add a warning when adding things to stable.
4381 (edit_index): use our_raw_input().
4382 (edit_overrides): likewise.
4383 (do_new): likewise. Use re.search() not re.match() since the
4384 default answer may not be the first one.
4385 (do_byhand): likewise.
4386 (do_new): Default to 'S'kip and never 'A'dd.
4388 * jennifer (action): pass prompt to our_raw_input().
4389 * melanie (game_over): likewise.
4390 * katie (action): likewise.
4392 * utils.py (our_raw_input): add an optional prompt argument to
4393 make the function more usable as a drop in replacement for
4396 * jennifer (check_files): correct reject() to not double prefix
4397 when using katie.py based functions.
4398 (check_dsc): likewise.
4400 * katie.py (Katie.reject): prepend a new line if appropriate
4401 rathen than appending one to avoid double new lines when caller
4402 adds one of his own.
4404 * lisa (determine_new): warn if the package is also in other
4407 2002-02-20 James Troup <james@nocrew.org>
4409 * jennifer (check_files): if .changes file lists "source" in
4410 Architecture field, there must be a .dsc.
4412 2002-02-15 James Troup <james@nocrew.org>
4414 * ashley (main): add some missing fields.
4416 * katie.py (Katie.check_dsc_against_db): fix to take into account
4417 the fact that the .orig.tar.gz might be in byhand, accepted or
4418 new. Also fix calling of reject().
4419 (Katie.check_binaries_against_db): fix calling of reject().
4420 (Katie.check_source_against_db): likewise.
4421 (Katie.dump_vars): add missing variables used for bug closures.
4423 * lisa (changes_compare_by_time): sort by reverse time.
4425 * katie.py (Katie.accept): log.
4426 (Katie.dump_vars): missing has_key test for optional changes fields.
4428 * jennifer (main): print "Accepted blah blah" to stdout, not stderr.
4429 (process_it): traceback goes to stderr, not stdout.
4430 (acknowledge_new): log.
4431 (do_byhand): likewise.
4433 * katie.py (Katie.update_subst): fix typo (Cnf vs. self.Cnf).
4435 * add_constraints.sql: add grants for the new fingerprint table.
4437 2002-02-13 James Troup <james@nocrew.org>
4439 * katie (do_reject): basename the .changes filename before trying
4440 to use it to construct the .reason filename.
4441 (process_it): call Katie.update_subst() so do_reject() DTRT with
4443 (do_reject): setup the mail template correctly.
4445 2002-02-12 James Troup <james@nocrew.org>
4447 * tea (process_dir): renamed 'arg' to 'unused' for clarity.
4448 (check_files): don't abuse global dictionaries.
4449 (Ent): use all variables.
4450 (check_timestamps): don't abuse global dictionaries.
4452 * fernanda.py: renamed to .py so lisa can import it.
4453 (check_dsc): remove unused local variables (pychecker).
4454 (display_changes): split off from check_changes.
4456 * katie: rewritten; most of the functionality moves to jennifer;
4457 what's left is the code to install packages once a day from the
4458 'accepted' directory.
4460 * jennifer: new program, processes packages in 'unchecked'
4461 (i.e. most of the non-install functionality of old katie).
4463 * katie.py: common functions shared between the clique of
4464 jennifer, lisa and katie.
4466 * lisa: new program; handles NEW and BYHAND packages.
4468 * jeri (usage): new function.
4470 (check_package): remove unused local variable (pychecker).
4472 * init_pool.sql: new table fingerprint. Add fingerprint colums to
4473 binaries and source. Add install_date to source.
4475 * halle (usage): new function.
4476 (main): use it. Remove unused options.
4477 (check_changes): remove unused local variable (pychecker).
4479 * add_constraints.sql: add fingerprint references.
4481 * db_access.py (get_or_set_fingerprint_id): new function.
4483 * ashley (main): new program; dumps the contents of a .katie file
4486 * alyson (main): remove option handling since we don't actually
4488 * cindy (main): likewise.
4490 * remove unnecessary imports and pre-define globals (pychecker).
4492 2002-02-11 Anthony Towns <ajt@debian.org>
4494 * added installation-report and upgrade-report pseudo-packages
4496 2002-01-28 Martin Michlmayr <tbm@cyrius.com>
4498 * katie (update_subst): use Dinstall::TrackingServer.
4499 * melanie (main): likewise.
4501 2002-01-27 James Troup <james@nocrew.org>
4503 * shania (main): it's IntLevel not IntVal; thanks to tbm@ for
4504 noticing, jgg@ for fix.
4506 2002-01-19 James Troup <james@nocrew.org>
4508 * utils.py (extract_component_from_section): handle non-US
4511 2002-01-12 James Troup <james@nocrew.org>
4513 * madison: add support for -S/--source-and-binary which displays
4514 information for the source package and all it's binary children.
4516 2002-01-13 Anthony Towns <ajt@debian.org>
4518 * katie.conf: Remove Catherine Limit and bump stable to 2.2r5
4519 * katie.conf: Add Dinstall::SigningKeyIds option, set to the 2001
4521 * katie.conf-non-US: Likewise.
4522 * ziyi: Suppoer Dinstall::SigningKeyIds to sign a Release file with
4523 multiple keys automatically. This is probably only useful for
4524 transitioning from an expired (or revoked?) key.
4526 2002-01-08 Ryan Murray <rmurray@debian.org>
4528 * debian/python-dep: new file that prints out python:Depends for
4530 * debian/control: use python:Depends, build-depend on python
4531 lower Depends: on postgresql to Suggests:
4532 * debian/rules: determine python version, install to the correct
4535 2001-12-18 Anthony Towns <ajt@debian.org>
4537 * ziyi: unlink Release files before overwriting them (in case they've
4539 * ziyi: always include checksums/sizes for the uncompressed versions
4540 of Sources and Packages, even if they're not present on disk
4542 2001-11-26 Ryan Murray <rmurray@debian.org>
4544 * ziyi (main): add SigningPubKey config option
4545 * katie.conf: use SigningPubKey config option
4546 * katie.conf-non-US: likewise
4548 2001-11-24 James Troup <james@nocrew.org>
4550 * katie (acknowledge_new): log newness.
4552 2001-11-24 Anthony Towns <ajt@debian.org>
4554 * ziyi (real_arch): bail out if some moron forgot to reset
4555 untouchable on stable.
4556 (real_arch): source Release files.
4558 2001-11-19 James Troup <james@nocrew.org>
4560 * claire.py (main): don't use apt_pkg.ReadConfigFileISC and
4562 * shania (main): likewise.
4564 * rhona (main): add default options.
4566 * db_access.py (get_archive_id): case independent.
4568 * katie (action): sort files so that ordering is consistent
4569 between mails; noticed/requested by Joey.
4571 2001-11-17 Ryan Murray <rmurray@debian.org>
4573 * utils.py: add get_conf function, change startup code to read all
4574 config files to the Cnf that get_conf returns
4575 use the component list from the katie conf rather than the hardcoded
4577 * all scripts: use new get_conf function
4578 * shania: fix try/except around changes files
4579 * jenna: only do debian-installer if it is a section in Cnf
4581 2001-11-16 Ryan Murray <rmurray@debian.org>
4583 * shania (main): Initialize days to a string of a number.
4584 (main): Initialize Cnf vars before reading in Cnf
4586 2001-11-14 Ryan Murray <rmurray@debian.org>
4588 * shania (main): Initialize days to a number.
4590 2001-11-04 James Troup <james@nocrew.org>
4592 * docs/Makefile: use docbook-utils' docbook2man binary.
4594 * Change all "if foo == []" constructs into "if not foo".
4596 * katie (check_changes): when installing into stable from
4597 proposed-updates, remove all non-stable target distributions.
4598 (check_override): don't check for override disparities on stable
4600 (stable_install): update install_bytes appropriately.
4601 (reject): stable rejection support; i.e. don't remove files when
4602 rejecting files in the pool, rather remove them from the
4603 proposed-update suite instead, rhona will do the rest.
4604 (manual_reject): support for a stable specific template.
4605 (main): setup up stable rejector in subst.
4607 2001-11-04 Martin Michlmayr <tbm@cyrius.com>
4609 * debian/control (Build-Depends): docbook2man has been superseded
4612 * neve (main): exit with a more useful error message.
4613 (update_suites): Suite::<suite>::Version, Origin and Description
4614 are not required, so don't fail if they don't exist.
4616 * db_access.py (get_archive_id): return -1 on error rather than
4618 (get_location_id): likewise.
4620 * madison (main): don't exit on the first not-found package,
4621 rather exit with an appropriate return code after processing all
4624 2001-11-03 James Troup <james@nocrew.org>
4626 * claire.py (find_dislocated_stable): add per-architecture
4627 symlinks for dislocated architecture: all debs.
4629 2001-10-19 Anthony Towns <ajt@debian.org>
4631 * apt.conf*, katie.conf*: add mips, mipsel, s390 to testing.
4633 2001-10-10 Anthony Towns <ajt@debian.org>
4635 * claire.py (fix_component_section): do _not_ assign to None under
4638 2001-10-07 Martin Michlmayr <tbm@cyrius.com>
4640 * melanie (main): don't duplicate architectures when removing from
4641 more than one suite.
4643 * heidi (main, process_file, get_list): report suite name not ID.
4645 * naima (nmu_p): be case insensitive.
4647 * naima (action): more list handling clean ups.
4649 * melanie (main): clean up lists handling to use string.join and
4652 * madison (main): clean up suite and architecture argument parsing
4653 to use slices less and string.join more.
4655 * utils.py (parse_changes): Use string.find() instead of slices for
4656 string comparisons thereby avoid hardcoding the length of strings.
4657 * ziyi (main): likewise.
4659 2001-10-07 James Troup <james@nocrew.org>
4661 * Remove mode argument from utils.open_files() calls if it's the
4664 2001-09-27 James Troup <james@nocrew.org>
4666 * katie (init): new function; options clean up.
4667 (usage): add missing options, remove obsolete ones.
4668 (main): adapt for the two changes above. If the lock file or
4669 new-ack log file don't exist, create them. Don't try to open the
4670 new-ack log file except running in new-ack mode.
4672 * alyson (main): initialize all the tables that are based on the
4675 * utils.py (touch_file): like touch(1).
4678 * catherine (usage): new.
4679 (main): use it. options cleanup.
4680 * claire.py: likewise.
4681 * fernanda: likewise.
4687 * andrea: options cleanup.
4688 * charisma: likewise.
4690 * madison: likewise.
4691 * melanie: likewise.
4692 * natalie: likewise.
4696 2001-09-26 James Troup <james@nocrew.org>
4698 * utils.py: default to sane config file locations
4699 (/etc/katie/{apt,katie}.conf. They can be the actual config files
4700 or they can point to the real ones through use of a new Config
4701 section. Based on an old patch by Adam Heath.
4702 (where_am_i): use the new default config stuff.
4703 (which_conf_file): likewise.
4704 (which_apt_conf_file): likewise.
4706 * charisma (main): output defaults to
4707 `Package~Version\tMaintainer'; input can be of either form. When
4708 parsing the new format do version comparisons, when parsing the
4709 old format assume anything in the extra file wins. This fixes the
4710 problem of newer non-US packages being overwhelmed by older
4711 versions still in stable on main.
4713 2001-09-17 James Troup <james@nocrew.org>
4715 * natalie.py (list): use result_join().
4717 * denise (main): result_join() moved to utils.
4719 * utils.py (result_join): move to utils; add an optional seperator
4722 2001-09-14 James Troup <james@nocrew.org>
4724 * heidi (set_suite): new function; does --set like natalie does,
4725 i.e. turns it into a sequence of --add's and --remove's
4726 internally. This is a major win (~20 minute run time > ~20
4727 seconds) in the common, everday (i.e. testing) case.
4728 (get_id): common code used by set_suite() and process_file().
4729 (process_file): call set_suite() and get_id().
4730 (main): add logging support.
4732 * julia: new script; syncs PostgeSQL with (LDAP-generated) passwd
4735 * utils.py (parse_changes): use slices or simple string comparison
4736 in favour of regexes where possible.
4738 * sql-aptvc.cpp (versioncmp): rewritten to take into account the
4739 fact that the string VARDATA() points to are not null terminated.
4741 * denise (result_join): new function; like string.join() but
4746 * charisma (main): python-pygresql 7.1 returns None not "".
4748 2001-09-14 Ryan Murray <rmurray@debian.org>
4750 * natalie.py (list): handle python-pygresql 7.1 returning None.
4752 2001-09-10 Martin Michlmayr <tbm@cyrius.com>
4754 * madison (main): return 1 if no package is found.
4756 2001-09-08 Martin Michlmayr <tbm@cyrius.com>
4758 * madison (main): better error handling for incorrect
4759 -a/--architecture or -s/--suite arguments.
4763 2001-09-05 Ryan Murray <rmurray@debian.org>
4765 * charisma, madison, katie: remove use of ROUser
4766 * katie.conf,katie.conf-non-US: remove defintion of ROUser
4768 2001-08-26 James Troup <james@nocrew.org>
4770 * katie (nmu_p.is_an_nmu): use maintaineremail to check for group
4771 maintained packages at cjwatson@'s request.
4773 2001-08-21 James Troup <james@nocrew.org>
4775 * madison (main): add -a/--architecture support.
4777 * jenna: use logging instead of being overly verbose on stdout.
4779 2001-08-11 Ryan Murray <rmurray@debian.org>
4781 * melanie: add functional help option
4783 2001-08-07 Anthony Towns <ajt@debian.org>
4785 * apt.conf, katie.conf: Add ia64 and hppa to testing.
4787 2001-07-28 James Troup <james@nocrew.org>
4789 * katie (check_dsc): ensure source version is >> than existing
4790 source in target suite.
4792 2001-07-25 James Troup <james@nocrew.org>
4794 * natalie.py: add logging support.
4796 * utils.py (open_file): make the second argument optional and
4797 default to read-only.
4799 * rene (main): work around broken source packages that duplicate
4800 arch: all packages with arch: !all packages (no longer allowed
4801 into the archive by katie).
4803 2001-07-13 James Troup <james@nocrew.org>
4805 * katie (action): don't assume distribution is a dictionary.
4806 (update_subst): don't assume architecture is a dictionary and that
4807 maintainer822 is defined.
4808 (check_changes): recognise nk_format exceptions.
4809 (check_changes): reject on 'testing' only uploads.
4810 (check_files): when checking to ensure all packages are newer
4811 versions check against arch-all packages too.
4812 (check_dsc): enforce the existent of a sane set of mandatory
4813 fields. Ensure the version number in the .dsc (modulo epoch)
4814 matches the version number in the .changes file.
4816 * utils.py (changes_compare): ignore all exceptions when parsing
4818 (build_file_list): don't UNDEF on a changes file with no format
4821 2001-07-07 James Troup <james@nocrew.org>
4823 * katie (nmu_p.is_an_nmu): check 'changedby822' for emptiness
4824 rather than 'changedbyname' to avoid false negatives on uploads
4825 with an email-address-only Changed-By field.
4826 (check_dsc): don't overwrite reject_message; append to it.
4827 (check_signature): likewise.
4828 (check_changes): likewise.
4829 (announce): condition logging on 'action'.
4831 * logging.py: new logging module.
4833 * katie: Cleaned up code by putting Cnf["Dinstall::Options"]
4834 sub-tree into a separate (global) variable.
4835 (check_dsc): ensure format is 1.0 to retain backwards
4836 compatability with dpkg-source in potato.
4837 (main): only try to obtain the lock when not running in no-action
4839 Use the new logging module.
4841 * christina: initial version; only partially usable.
4843 2001-06-28 Anthony Towns <ajt@debian.org>
4845 * apt.conf: Add ExtraOverrides to auric.
4847 2001-06-25 James Troup <james@nocrew.org>
4849 * katie (nmu_p.is_an_nmu): the wonderful dpkg developers decided
4850 they preferred the name 'Uploaders'.
4852 2001-06-23 James Troup <james@nocrew.org>
4854 * katie (check_files): fix typo in uncommon rejection message,
4855 s/sourceversion/source version/.
4857 * denise (main): we can't use print because stdout has been
4860 * katie (source_exists): new function; moved out of check_files()
4861 and added support for binary-only NMUs of earlier sourceful NMUs.
4863 * rhona (clean): find_next_free has moved.
4865 * utils.py (find_next_free): new function; moved here from rhona.
4866 Change too_many to be an argument with a default value, rather
4867 than a hardcoded variable.
4869 * shania: rewritten to work better; REJECTion reminder mail
4870 handling got lost though.
4872 2001-06-22 James Troup <james@nocrew.org>
4874 * rhona (main): remove unused override code.
4876 * fernanda (main): remove extraneous \n's from utils.warn calls.
4877 * natalie.py (list): likewise.
4879 * catherine, cindy, denise, heidi, jenna, katie, neve, rhona, tea:
4880 use utils.{warn,fubar} where appropriate.
4882 2001-06-21 James Troup <james@nocrew.org>
4884 * katie (nmu_p): new class that encapsulates the "is a nmu?"
4886 (nmu_p.is_an_nmu): add support for multiple maintainers specified
4887 by the "Maintainers" field in the .dsc file and maintainer groups.
4888 (nmu_p.__init__): read in the list of group maintainer names.
4889 (announce): use nmu_p.
4891 2001-06-20 James Troup <james@nocrew.org>
4893 * rene (main): hardcode the suite experimental is compared to by
4894 name rather than number.
4896 * katie (check_files): differentiate between doesn't-exist and
4897 permission-denied in "can not read" rejections; requested by edd@.
4898 (check_dsc): use os.path.exists rather than os.access to allow the
4899 above check to kick in.
4901 * heidi (process_file): read all input before doing anything and
4904 2001-06-15 James Troup <james@nocrew.org>
4906 * fernanda: new script; replaces old 'check' shell script
4909 2001-06-14 James Troup <james@nocrew.org>
4911 * katie: actually import traceback module to avoid amusing
4914 2001-06-10 James Troup <james@nocrew.org>
4916 * utils.py (extract_component_from_section): fix to handle just
4917 'non-free' and 'contrib'. Also fix to handle non-US in a
4918 completely case insensitive manner as a component.
4920 2001-06-08 James Troup <james@nocrew.org>
4922 * madison (arch_compare): sort function that sorts 'source' first
4923 then alphabetically.
4926 2001-06-05 Jeff Licquia <jlicquia@progeny.com>
4928 * catherine (poolize): explicitly make poolized_size a long so it
4929 doesn't overflow when poolizing e.g. entire archives.
4931 2001-06-01 James Troup <james@nocrew.org>
4933 * utils.py (send_mail): throw exceptions rather than exiting.
4935 * katie (process_it): catch exceptions and ignore them.
4937 2001-06-01 Michael Beattie <mjb@debian.org>
4939 * added update-mailingliststxt and update-readmenonus to update
4940 those files, respectively. modified cron.daily{,-non-US} to
4943 2001-05-31 Anthony Towns <ajt@debian.org>
4945 * rhona: make StayOfExecution work.
4947 2001-05-31 James Troup <james@nocrew.org>
4949 * rhona (find_next_free): fixes to not overwrite files but rename
4950 them by appending .<n> instead.
4951 (clean): use find_next_free and use dated sub-directories in the
4954 * utils.py (move): don't overwrite files unless forced to.
4957 2001-05-24 James Troup <james@nocrew.org>
4959 * katie (check_files): determine the source version here instead
4960 of during install().
4961 (check_files): check for existent source with bin-only NMU
4963 (main): sort the list of changes so that the source-must-exist
4964 check Does The Right Thing(tm).
4966 * utils.py (changes_compare): new function; sorts a list of
4967 changes files by 'have-source', source, version.
4968 (cc_fix_changes): helper function.
4969 (parse_changes): use compiled regexes.
4970 (fix_maintainer): likewise.
4972 * rene (main): warn about packages in experimental that are
4973 superseded by newer versions in unstable.
4975 2001-05-21 James Troup <james@nocrew.org>
4977 * rene (main): add support for checking for ANAIS (Architecture
4978 Not Allowed In Source) packages.
4980 2001-05-17 James Troup <james@nocrew.org>
4982 * katie (check_changes): initalize `architecture' dictionary in
4983 changes global so that if we can't parse the changes file for
4984 whatever reason we don't undef later on.
4986 * utils.py (parse_changes): fix handling of multi-line fields
4987 where the first line did have data.
4989 2001-05-05 Anthony Towns <ajt@debian.org>
4991 * ziyi: Add "NotAutomatic: yes" to experimental Release files.
4992 (It should always have been there. Ooopsy.)
4994 2001-05-03 Anthony Towns <ajt@debian.org>
4996 * jenna: Cleanup packages that move from arch:any to arch:all or
4999 2001-04-24 Anthony Towns <ajt@debian.org>
5001 * ziyi: add ``SHA1:'' info to Release files. Also hack them up to
5002 cope with debian-installer and boot-floppies' md5sum.txt.
5004 2001-04-16 James Troup <james@nocrew.org>
5006 * katie (check_changes): add missing %s format string argument.
5007 (stable_install): temporary work around for morgue location to
5008 move installed changes files into.
5009 (stable_install): helps if you actually read in the template.
5010 (manual_reject): fix for editing of reject messages which was
5011 using the wrong variable name.
5013 * jenna (generate_src_list): typo; s/package/source/; fixes undef crash.
5015 2001-04-13 James Troup <james@nocrew.org>
5017 * katie (manual_reject): Cc the installer.
5019 (check_changes): remove unused maintainer-determination code.
5020 (update_subst): add support for Changed-By when setting the
5021 *MAINTAINER* variables.
5023 * rene (bar): new function to check for packages on architectures
5024 when they shouldn't be.
5026 * natalie.py (main): use fubar() and warn() from utils.
5028 * utils.py (whoami): new mini-function().
5029 * melanie (main): use it.
5030 * katie (manual_reject): likewise.
5032 2001-04-03 James Troup <james@nocrew.org>
5034 * katie (action): ignore exceptions from os.path.getmtime() so we
5035 don't crash on non-existent changes files (e.g. when they are
5036 moved between the start of the install run in cron.daily and the
5037 time we get round to processing them).
5039 * madison (main): also list source and accept -s/--suite.
5041 * jenna (generate_src_list): missing \n in error message.
5043 * katie (update_subst): add sane defaults for when changes is
5046 2001-03-29 James Troup <james@nocrew.org>
5048 * melanie (main): use fubar() and warn() from utils. Remember who
5049 the maintainer for the removed packages are and display that info
5050 to the user. Readd support for melanie-specific Bcc-ing that got
5051 lost in the TemplateSubst transition.
5053 * utils.py (fubar): new function.
5056 * db_access.py (get_maintainer): as below.
5058 * charisma (get_maintainer): moved the bulk of this function to
5059 db_access so that melanie can use it too.
5061 * claire.py (find_dislocated_stable): restrict the override join
5062 to those entries where the suite is stable; this avoids problems
5063 with packages which have moved to new sections (e.g. science)
5064 between stable and unstable.
5066 2001-03-24 James Troup <james@nocrew.org>
5068 * catherine (poolize): new function; not really independent of
5072 * katie (stable_install): __SUITE__ needs to be space prefixed
5073 because buildd's check for 'INSTALLED$'.
5075 2001-03-22 James Troup <james@nocrew.org>
5077 * utils.py (regex_safe): also need to escape '.'; noticed by ajt@.
5079 * jenna: rewritten; now does deletions on a per-suite level
5080 instead of a per-suite-component-architecture-type level. This
5081 allows mutli-component packages to be auto-cleaned (and as a
5082 bonus, reduces the code size and duplication).
5084 2001-03-22 Anthony Towns <ajt@debian.org>
5086 * ziyi (main): fix ziyi to overwrite existing Release.gpg files
5087 instead of just giving a gpg error.
5089 2001-03-21 James Troup <james@nocrew.org>
5091 * madison (main): use apt_pkg.VersionCompare to sort versions so
5092 that output is correctly sorted for packages like debhlper.
5095 * tea (check_source_in_one_dir): actually find problematic source
5098 * katie (check_dsc): remember the orig.tar.gz's location ID if
5099 it's not in a legacy suite.
5100 (check_diff): we don't use orig_tar_id.
5101 (install): add code to handle sourceful diff-only upload of
5102 packages which change components by copying the .orig.tar.gz into
5103 the new component, if it doesn't already exist there.
5104 (process_it): reset orig_tar_location (as above).
5106 * melanie (main): use template substiution for the bug closing
5108 (main): don't hardcode bugs.debian.org or packages.debian.org
5109 either; use configuration items.
5113 * natalie.py (init): use None rather than 'localhost' for the
5114 hostname given to pg.connect.
5116 * utils.py (TemplateSubst): new function; lifted from
5119 2001-03-21 Ryan Murray <rmurray@debian.org>
5121 * katie (announce): fix the case of non-existent
5122 Suite::$SUITE::Announce.
5124 2001-03-20 Ryan Murray <rmurray@debian.org>
5126 * debian/rules (binary-indep): install melanie into /usr/bin/ not
5129 * alyson (main): use config variable for database name.
5130 * andrea (main): likewise.
5131 * catherine (main): likewise.
5132 * charisma (main): likewise.
5133 * cindy (main): likewise.
5134 * claire.py (main): likewise.
5135 * denise (main): likewise.
5136 * heidi (main): likewise.
5137 * jenna (main): likewise.
5138 * katie (main): likewise.
5139 * madison (main): likewise.
5140 * melanie (main): likewise.
5141 * neve (main): likewise.
5142 * rhona (main): likewise.
5143 * tea (main): likewise.
5145 2001-03-15 James Troup <james@nocrew.org>
5147 * rhona (check_sources): fixed evil off by one (letter) error
5148 which was causing only .dsc files to be deleted when cleaning
5151 * charisma (get_maintainer_from_source): remove really stupid and
5152 gratuitous IN sub-query and replace with normal inner join.
5153 (main): connect as read-only user nobody.
5155 * rhona (clean_maintainers): rewritten to use SELECT and sub-query
5157 (check_files): likewise; still disabled by default though.
5158 (clean_binaries): add ' seconds' to the mysterious number in the
5162 * tea (check_files): add missing global declaration on db_files.
5164 2001-03-14 James Troup <james@nocrew.org>
5166 * rhona: rewritten large chunks. Removed a lot of the silly
5167 selecting into dictionaries and replaced it with 'where exists'
5168 based sub queries. Added support for StayOfExecution. Fix the
5169 problem with deleting dsc_files too early and disable cleaning of
5172 2001-03-14 Anthony Towns <ajt@debian.org>
5174 * katie (announce): also check Changed-By when trying to detect
5177 2001-03-06 Anthony Towns <ajt@debian.org>
5179 * ziyi (main): Generate Release.gpg files as well, using the key from
5180 Dinstall::SigningKey in katie.conf, if present. That key has to be
5181 passwordless, and hence kept fairly secretly.
5183 2001-03-02 James Troup <james@nocrew.org>
5185 * utils.py (str_isnum): new function; checks to see if the string
5188 * shania (main): fix _hideous_ bug which was causing all files > 2
5189 weeks old to be deleted from incoming, even if they were part of a
5192 2001-02-27 James Troup <james@nocrew.org>
5194 * melanie (main): accept new argument -C/--carbon-copy which
5195 allows arbitarty carbon-copying of the bug closure messages.
5196 Cleaned up code by putting Cnf["Melanie::Options"] sub-tree into a
5199 2001-02-27 Anthony Towns <ajt@debian.org>
5201 * ziyi: new program; generates Release files.
5203 2001-02-25 James Troup <james@nocrew.org>
5205 * katie (reject): add missing '\n' to error message.
5206 (manual_reject): likewise.
5207 (install): catch exceptions from moving the changes file into DONE
5210 * tea (check_md5sums): new function.
5212 2001-02-25 Michael Beattie <mjb@debian.org>
5214 * melanie: use $EDITOR if available.
5216 2001-02-15 James Troup <james@nocrew.org>
5218 * utils.py (parse_changes): don't crash and burn on empty .changes
5219 files. Symptoms noticed by mjb@.
5221 2001-02-15 Adam Heath <doogie@debian.org>
5223 * denise (main): use an absolute path for the output filename.
5225 * sql-aptvc.cpp: don't #include <utils/builtins.h> as it causes
5226 compile errors with postgresql-dev >= 7.0.
5228 2001-02-12 James Troup <james@nocrew.org>
5230 * rene: initial version.
5232 * andrea: initial version.
5234 * catherine (main): remove obsolete assignment of arguments.
5236 2001-02-09 James Troup <james@nocrew.org>
5238 * catherine: first working version.
5240 2001-02-06 James Troup <james@nocrew.org>
5242 * katie (check_files): validate the priority field; i.e. ensure it
5243 doesn't contain a '/' (to catch people prepending the priority
5244 with the component rather than the section).
5245 (check_override): don't warn about source packages; the only check
5246 is on section and we have no GUI tools that would use the Section
5247 field for a Sources file.
5248 (announce): use tags rather than severities for NMUs. Requested
5249 by Josip Rodin <joy@>. [#78035]
5251 2001-02-04 James Troup <james@nocrew.org>
5253 * tea (check_override): new function; ensures packages in suites
5254 are also in the override file. Thanks to bod@ for noticing that
5255 such packages existed.
5257 * katie: move file type compiled regular expressions to utils as
5258 catherine uses them too.
5259 (check_changes): always default maintainer822 to the installer
5260 address so that any bail out won't cause undefs later.
5261 (check_files): update file type re's to match above.
5262 (stable_install): likewise.
5263 (reject): handle any except from moving the changes files. Fixes
5264 crashes on unreadable changes files.
5266 * melanie (main): add an explanation of why things are not removed
5269 2001-01-31 James Troup <james@nocrew.org>
5271 * melanie (main): ignore a) no message, b) removing from stable or
5272 testing when invoked with -n/--no-action.
5274 * katie (check_override): lower section before checking to see if
5275 we're whining about 'non-US' versus 'non-US/main'.
5277 * sql-aptvc.cpp: new file; wrapper around apt's version comparison
5278 function so that we can use inside of PostgreSQL.
5280 2001-01-28 James Troup <james@nocrew.org>
5282 * katie: updated to pass new flag to parse_changes() and deal with
5283 the exception raised on invalid .dsc's if appropriate.
5284 * shania (main): likewise.
5285 * melanie (main): likewise.
5287 * tea (check_dscs): new function to validate all .dsc files in
5290 * utils.py (parse_changes): if passed an additional flag, validate
5291 the .dsc file to ensure it's extractable by dpkg-source.
5292 Requested by Ben Collins <bcollins@>.
5294 2001-01-27 James Troup <james@nocrew.org>
5296 * madison (main): connect to the DB as nobody.
5298 * katie (check_files): remove support for -r/--no-version-check
5299 since it makes no sense under katie (jenna will automatically
5300 remove the (new) older version) and was evil in any event.
5301 (check_changes): add missing new line to rejection message.
5302 (check_dsc): likewise.
5303 (process_it): reset reject_message here.
5304 (main): not here. Also remove support for -r.
5306 2001-01-26 James Troup <james@nocrew.org>
5308 * katie (check_override): don't whine about 'non-US/main' versus
5311 2001-01-26 Michael Beattie <mjb@debian.org>
5313 * natalie.py (usage): new function.
5316 2001-01-25 Antti-Juhani Kaijanaho <gaia@iki.fi>
5318 * update-mirrorlists: Update README.non-US too (request from Joy).
5320 2001-01-25 James Troup <james@nocrew.org>
5322 * katie (reject): catch any exception from utils.move() and just
5323 pass, we previously only caught can't-overwrite errors and not
5326 * jenna (generate_src_list): use ORDER BY in selects to avoid
5327 unnecessary changes to Packages files.
5328 (generate_bin_list): likewise.
5330 * utils.py (extract_component_from_section): separated out from
5331 build_file_list() as it's now used by claire too.
5333 * claire.py (find_dislocated_stable): rewrite the query to extract
5334 section information and handle component-less locations properly.
5335 Thanks to ajt@ for the improved queries.
5336 (fix_component_section): new function to fix components and
5339 2001-01-23 James Troup <james@nocrew.org>
5341 * katie (check_files): set file type for (u?)debs first thing, so
5342 that if we continue, other functions which rely on file type
5343 existing don't bomb out. If apt_pkg or apt_inst raise an
5344 exception when parsing the control file, don't try any other
5345 checks, just drop out.
5346 (check_changes): new test to ensure there is actually a target
5349 2001-01-22 James Troup <james@nocrew.org>
5351 * katie (usage): s/dry-run/no-action/. Noticed by Peter Gervai
5353 (check_changes): when mapping to unstable, remember to actually
5354 add unstable to the suite list and not just remove the invalid
5357 2001-01-21 James Troup <james@nocrew.org>
5359 * katie (check_files): catch exceptions from debExtractControl()
5360 and reject packages which raise any.
5362 2001-01-19 James Troup <james@nocrew.org>
5364 * katie (check_signature): basename() file name in rejection
5367 2001-01-18 James Troup <james@nocrew.org>
5369 * katie (in_override_p): remember the section and priority from
5370 the override file so we can check them against the package later.
5371 (check_override): new function; checks section and priority (for
5372 binaries) from the package against the override file and mails the
5373 maintainer about any disparities.
5374 (install): call check_override after announcing the upload.
5376 2001-01-16 James Troup <james@nocrew.org>
5378 * utils.py (build_file_list): catch ValueError's from splitting up
5379 the files field and translate it into a parse error.
5381 * tea: add support for finding unreferenced files.
5383 * katie (in_override_p): add support for suite-aliasing so that
5384 proposed-updates uploads work again.
5385 (check_changes): catch parses errors from utils.build_file_list().
5386 (check_dsc): likewise.
5387 (check_diff): yet more dpkg breakage so we require even newer a
5390 * jenna (generate_bin_list): don't do nasty path munging that's no
5393 * denise (main): support for non-US; and rename testing's override
5394 files so they're based on testing's codename.
5396 2001-01-16 Martin Michlmayr <tbm@cyrius.com>
5398 * melanie: add to the bug closing message explaining what happens
5399 (or rather doesn't) with bugs against packages that have been
5402 2001-01-14 James Troup <james@nocrew.org>
5404 * charisma (main): fix silly off-by-one error; suite priority
5405 checking was done using "less than" rather than "less than or
5406 equal to" which was causing weird hesienbugs with wrong Maintainer
5409 2001-01-10 James Troup <james@nocrew.org>
5411 * katie (in_override_p): adapted to use SQL-based overrides.
5412 read_override_file function disappears.
5414 * db_access.py: add new functions get_section_id, get_priority_id
5415 and get_override_type_id.
5416 (get_architecture_id): return -1 if the architecture is not found.
5418 * heidi: switch %d -> %d in all SQL queries.
5419 (get_list): Use string.join where appropriate.
5421 * rhona (in_override_p): don't die if the override file doesn't
5423 (main): warn if the override file doesn't exist.
5425 * alyson: new script; will eventually sync the config file and the
5428 * natalie.py: new script; manipulates overrides.
5430 * melanie: new script; removes packages from suites.
5432 2001-01-08 James Troup <james@nocrew.org>
5434 * katie (re_bad_diff): whee; dpkg 1.8.1.1 didn't actually fix
5435 anything it just changed the symptom. Recognise the new breakage
5436 and reject them too.
5438 2001-01-07 James Troup <james@nocrew.org>
5440 * katie (check_dsc): when adding the cwd copy of the .orig.tar.gz
5441 to the .changes file, be sure to set up files[filename]["type"]
5444 2001-01-06 James Troup <james@nocrew.org>
5446 * katie (check_diff): new function; detects bad diff files
5447 produced by dpkg 1.8.1 and rejects thems.
5448 (process_it): call check_diff().
5449 (check_dsc): gar. Add support for multiple versions of the
5450 .orig.tar.gz file in the archive from -sa uploads. Check md5sum
5451 and size against all versions and use one which matches if
5452 possible and exclude any that don't from being poolized to avoid
5453 file overwrites. Thanks to broonie@ for providing the example.
5454 (install): skip any files marked as excluded as above.
5456 2001-01-05 James Troup <james@nocrew.org>
5458 * heidi (process_file): add missing argument to error message.
5460 2001-01-04 James Troup <james@nocrew.org>
5462 * heidi (main): fix handling of multiple files by reading all
5463 files not just the first file n times (where n = the number of
5464 files passed as arguments).
5466 2001-01-04 Anthony Towns <ajt@debian.org>
5468 * katie (check_dsc): proper fix for the code which locates the
5469 .orig.tar.gz; check for '<filename>$' or '^<filename>$'.
5471 2000-12-20 James Troup <james@nocrew.org>
5473 * rhona: replace IN's with EXISTS's to make DELETE time for
5474 binaries and source sane on auric. Add a -n/--no-action flag and
5475 make it stop actions if used. Fixed a bug in binaries deletion
5476 with no StayOfExecution (s/</<=/). Add working -h/--help and
5477 -V/--version. Giving timing info on deletion till I'm sure it's
5480 * katie (check_changes): map testing to unstable.
5482 * madison: new script; shows versions in different architectures.
5484 * katie (check_dsc): ensure size matches as well as md5sum;
5485 suggested by Ben Collins <bcollins@debian.org> in Debian Bug
5488 2000-12-19 James Troup <james@nocrew.org>
5490 * katie (reject): ignore the "can't overwrite file" exception from
5491 utils.move() and leave the files where they are.
5492 (reject): doh! os.access() test was reversed so we only tried to
5493 move files which didn't exist... replaced with os.path.exists()
5494 test the right way round.
5496 * utils.py (move): raise an exception if we can't overwrite the
5500 2000-12-18 James Troup <james@nocrew.org>
5502 * rhona: first working version.
5504 * db_access.py (get_files_id): force both sizes to be integers.
5506 * katie (main): use size_type().
5508 * utils.py (size_type): new function; pretty prints a file size.
5510 2000-12-17 James Troup <james@nocrew.org>
5512 * charisma (main): do version compares so that older packages do
5513 not override newer ones and process source first as source wins
5514 over binaries in terms of who we think of as the Maintainer.
5516 2000-12-15 James Troup <james@nocrew.org>
5518 * katie (install): use the files id for the .orig.tar.gz from
5520 (install): limit select for legacy source to a) source in legacy
5521 or legacy-mixed type locations and b) distinct on files.id.
5522 (install): rather than the bizarre insert new, delete old method
5523 for moving legacy source into the pool, use a simple update of
5525 (process_it): initalize some globals before each process.
5527 2000-12-14 James Troup <james@nocrew.org>
5529 * katie (in_override_p): index on binary_type too since .udeb
5530 overrides are in a different file.
5531 (read_override_file): likewise.
5532 (check_files): correct filename passed to get_files_id().
5533 (check_dsc): we _have_ to preprend '/' to the filename to avoid
5534 mismatches like jabber.orig.tar.gz versus libjabber.orig.tar.gz.
5535 (check_dsc): remember the files id of the .orig.tar.gz, not the
5538 2000-12-13 James Troup <james@nocrew.org>
5540 * utils.py (poolify): force the component to lower case except for
5543 * katie (in_override_p): handle .udeb-specific override files.
5544 (check_files): pass the binary type to in_override_p().
5545 (check_dsc): remember the location id of the old .orig.tar.gz in
5546 case it's not in the pool.
5547 (install): use location id from dsc_files; which is where
5548 check_dsc() puts it for old .orig.tar.gz files.
5549 (install): install files after all DB work is complete.
5550 (reject): basename() the changes filename.
5551 (manual_reject): likewise.
5553 * shania: new progam; replaces incomingcleaner.
5555 2000-12-05 James Troup <james@nocrew.org>
5557 * katie (check_changes): if inside stable and can't find files
5558 from the .changes; assume it's installed in the pool and chdir()
5560 (check_files): we are not installing for stable installs, so don't
5561 check for overwriting existing files.
5562 (check_dsc): likewise.
5563 (check_dsc): reorder .orig.tar.gz handling so that we search in
5564 the pool first and only then fall back on any .orig.tar.gz in the
5565 cwd; this avoids false positives on the overwrite check when
5566 people needlessly reupoad the .orig.tar.gz in a non-sa upload.
5567 (install): if this is a stable install, bail out to
5568 stable_install() immediately.
5569 (install): dsc_files handling was horribly broken. a) we need to
5570 add files from the .dsc and not the .changes (duh), b) we need to
5571 add the .dsc file itself to dsc_files (to be consistent with neve
5572 if for no other reason).
5573 (stable_install): new function; handles installs from inside
5574 proposed-updates to stable.
5575 (acknowledge_new): basename changes_filename before doing
5577 (process_it): absolutize the changes filename to avoid the
5578 requirement of being in the same directory as the .changes file.
5579 (process_it): save and restore the cwd as stable installs can
5580 potentially jump into the pool to find files.
5582 * jenna: dislocated_files support using claire.
5584 * heidi (process_file): select package field from binaries
5587 * db_access.py (get_files_id): fix cache key used.
5589 * utils.py (build_file_list): fix 'non-US/non-free' case in
5590 section/component splitting.
5591 (move): use os.path.isdir() rather than stat.
5594 * claire.py: new file; stable in non-stable munger.
5596 * tea: new file; simply ensures all files in the DB exist.
5598 2000-12-01 James Troup <james@nocrew.org>
5600 * katie (check_dsc): use regex_safe().
5601 (check_changes): typo in changes{} key:
5602 s/distributions/distribution/.
5603 (install): use changes["source"], not files[file]["source"] as the
5604 latter may not exist and the former is used elsewhere. Commit the
5605 SQL transaction earlier.
5607 * utils.py (regex_safe): new function; escapes characters which
5608 have meaning to SQL's regex comparison operator ('~').
5610 2000-11-30 James Troup <james@nocrew.org>
5612 * katie (install): pool_location is based on source package name,
5615 * utils.py (move): if dest is a directory, append the filename
5619 * katie (check_files): don't allow overwriting of existing .debs.
5620 (check_dsc): don't allow overwriting of existing source files.
5622 2000-11-27 James Troup <james@nocrew.org>
5624 * katie (check_signature): don't try to load rsaref; it's
5626 (in_override_p): don't try to lookup override entries for packages
5627 with an invalid suite name.
5628 (announce): don't assume the suite name is valid; use Find() to
5629 lookup the mailing list name for announcements.
5631 * utils.py (where_am_i): typo; hostname is in the first element,
5634 * db_access.py (get_suite_id): return -1 on an unknown suite.
5636 2000-11-26 James Troup <james@nocrew.org>
5638 * katie (install): fix CopyChanges handling; typo in in checking
5639 Cnf for CopyChanges flag and was calling non-existent function
5642 * utils.py (copy): new function; clone of move without the
5645 2000-11-25 James Troup <james@nocrew.org>
5647 * utils.py (build_file_list): handle non-US prefixes properly
5648 (i.e. 'non-US' -> 'non-US/main' and 'non-US/libs' -> 'non-US/main'
5649 + 'libs' not 'non-US/libs').
5650 (send_mail): add '-odq' to sendmail invocation to avoid DNS lookup
5651 delays. This is possibly(/probably) exim speicifc and (like other
5652 sendmail options) needs to be in the config file.
5654 2000-11-24 James Troup <james@nocrew.org>
5656 * rhona (check_sources): we need file id from dsc_files; not id.
5657 Handle non .dsc source files being re-referenced in dsc_files.
5659 * katie (in_override_p): strip out any 'non-US' prefix.
5660 (check_files): use utils.where_am_i() rather than hardcoding.
5661 (check_files): validate the component.
5662 (install): use utils.where_am_i() rather than hardcoding.
5663 (install): fix mail to go to actual recepient.
5665 (manual_reject): likewise.
5666 (acknowledge_new): likewise.
5667 (announce): likewise.
5669 * db_access.py (get_component_id): ignore case when searching for
5670 the component and don't crash if the component can't be found, but
5672 (get_location_id): handle -1 from get_component_id().
5674 * jenna (generate_src_list): don't bring 'suite' into our big
5675 multi-table-joining select as we already know the 'suite_id'.
5676 (generate_bin_list): likewise.
5678 * neve (main): don't quit if not on ftp-master.
5679 (process_packages): remove unused variable 'suite_codename'.
5681 * utils.py (move): actually move the file.
5682 (build_file_list): handle non-US prefixes in the section.
5684 * catherine (main): use which_conf_file().
5685 * charisma (main): likewise.
5686 * heidi (main): likewise.
5687 * jenna (main): likewise.
5688 * katie (main): likewise.
5689 * neve (main): likewise.
5690 * rhona (main): likewise.
5692 * utils.py (where_am_i): new routine; determines the archive as
5693 understood by other 'dak' programs.
5694 (which_conf_file): new routine; determines the conf file to read.
5696 2000-11-17 James Troup <james@nocrew.org>
5698 * katie (install): fix where .changes files for proposed-updates
5701 2000-11-04 James Troup <james@nocrew.org>
5703 * jenna (main): handle architecture properly if no
5704 -a/--architecture argument is given, i.e. reset architecture with
5705 the values for the suite for each suite.
5707 * Add apt_pkg.init() to the start of all scripts as it's now
5708 required by python-apt.
5710 2000-10-29 James Troup <james@nocrew.org>
5712 * jenna (generate_bin_list): take an additional argument 'type'
5713 and use it in the SELECT.
5714 (main): if processing component 'main', process udebs and debs.
5716 * neve (process_packages): set up 'type' in 'binaries' (by
5719 * katie (re_isadeb): accept ".udeb" or ".deb" as a file ending.
5720 (check_files): set up files[file]["dbtype"].
5721 (install): use files[file]["dbtype"] to set up the 'type' field in
5722 the 'binaries' table.
5724 * init_pool.sql: add a 'type' field to the 'binaries' table to
5725 distinguisgh between ".udeb" and ".deb" files.
5727 * utils.py (move): scrap basename() usage; use a "dir_p(dest) :
5728 dest ? dirname(dest)" type check instead.
5730 * katie (check_dsc): handle the case of an .orig.tar.gz not found
5731 in the pool without crashing. Also handle the case of being asked
5732 to look for something other than an .orig.tar.gz in the pool.
5734 2000-10-26 James Troup <james@nocrew.org>
5736 * katie (install): fix filenames put into files table during
5737 poolification of legacy source.
5739 * utils.py (move): work around a bug in os.path.basename() which
5740 cunningly returns '' if there is a trailing slash on the path
5743 * katie (check_dsc): Remove more cruft. If we find the
5744 .orig.tar.gz in the pool and it's in a legacy (or legacy-mixed)
5745 location, make a note of that so we can fix things in install().
5746 (install): as above. Move any old source out of legacy locations
5747 so that 'apt-get source' will work.
5748 (process_it): reset the flag that indicates to install that the
5751 * cron.daily: more. Nowhere near complete yet though.
5753 * katie (install): don't run os.makedirs, a) utils.move() does
5754 this now, b) we weren't removing the user's umask and were
5755 creating dirs with SNAFU permissions.
5756 (check_dsc): rewrite the .orig.tar.gz handling to take into
5757 account, err, package pools. i.e. look anywhere in the pool
5758 rather than faffing around with two simple paths.
5760 * neve (process_sources): add the .dsc to dsc_files too.
5762 2000-10-25 James Troup <james@nocrew.org>
5764 * neve (process_sources): don't duplicate .orig.tar.gz's.
5766 2000-10-23 James Troup <james@nocrew.org>
5768 * utils.py (re_extract_src_version): moved here.
5770 * neve: move re_extract_src_version to utils.
5771 (process_packages): reflect change.
5773 * katie (install): reflect change.
5775 2000-10-19 James Troup <james@nocrew.org>
5777 * jenna (generate_src_list): handle locations with null
5779 (generate_bin_list): likewise.