Add some missing files needed for ./configure;make
authorneilbrown <neilbrown>
Tue, 20 Dec 2005 05:26:17 +0000 (05:26 +0000)
committerneilbrown <neilbrown>
Tue, 20 Dec 2005 05:26:17 +0000 (05:26 +0000)
INSTALL [new file with mode: 0644]
compile [new file with mode: 0755]
depcomp [new file with mode: 0755]
ltmain.sh [new file with mode: 0644]
missing [new file with mode: 0755]

diff --git a/INSTALL b/INSTALL
new file mode 100644 (file)
index 0000000..b42a17a
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,182 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
diff --git a/compile b/compile
new file mode 100755 (executable)
index 0000000..1b1d232
--- /dev/null
+++ b/compile
@@ -0,0 +1,142 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+       # configure might choose to run compile as `compile cc -o foo foo.c'.
+       # So we strip `-o arg' only if arg is an object.
+       eat=1
+       case $2 in
+         *.o | *.obj)
+           ofile=$2
+           ;;
+         *)
+           set x "$@" -o "$2"
+           shift
+           ;;
+       esac
+       ;;
+      *.c)
+       cfile=$1
+       set x "$@" "$1"
+       shift
+       ;;
+      *)
+       set x "$@" "$1"
+       shift
+       ;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no `-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # `.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/depcomp b/depcomp
new file mode 100755 (executable)
index 0000000..04701da
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,530 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mecanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[   ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+       set fnord "$@"
+       shift
+       shift
+       ;;
+    *)
+       set fnord "$@" "$arg"
+       shift
+       shift
+       ;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::   \1 \\:p' >> "$depfile"
+  echo "       " >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100644 (file)
index 0000000..db4982d
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,6538 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION="1.5.20 Debian 1.5.20-2"
+TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)"
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+  setopt NO_GLOB_SUBST
+fi
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS="  $lt_nl"
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+       sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
+      if test "X$win32_nmres" = "Ximport" ; then
+        win32_libid_type="x86 archive import"
+      else
+        win32_libid_type="x86 archive static"
+      fi
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+       case $arg in
+         *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+       CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+       for z in $available_tags; do
+         if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+           # Evaluate the configuration.
+           eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+           CC_quoted=
+           for arg in $CC; do
+           # Double-quote args containing other shell metacharacters.
+           case $arg in
+             *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+             arg="\"$arg\""
+             ;;
+           esac
+           CC_quoted="$CC_quoted $arg"
+         done
+           case "$@ " in
+             " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+             # The compiler in the base compile command matches
+             # the one in the tagged configuration.
+             # Assume this is the tagged configuration we want.
+             tagname=$z
+             break
+             ;;
+           esac
+         fi
+       done
+       # If $tagname still isn't set, then no tagged configuration
+       # was found and let the user know that the "--tag" command
+       # line option must be used.
+       if test -z "$tagname"; then
+         $echo "$modename: unable to infer tagged configuration"
+         $echo "$modename: specify a tag with \`--tag'" 1>&2
+         exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+       fi
+       ;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+       [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+       *) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xdir="$my_gentop/$my_xlib"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      status=$?
+      if test "$status" -ne 0 && test ! -d "$my_xdir"; then
+       exit $status
+      fi
+      case $host in
+      *-darwin*)
+       $show "Extracting $my_xabs"
+       # Do not bother doing anything if just a dry run
+       if test -z "$run"; then
+         darwin_orig_dir=`pwd`
+         cd $my_xdir || exit $?
+         darwin_archive=$my_xabs
+         darwin_curdir=`pwd`
+         darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+         darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+         if test -n "$darwin_arches"; then 
+           darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+           darwin_arch=
+           $show "$darwin_base_archive has multiple architectures $darwin_arches"
+           for darwin_arch in  $darwin_arches ; do
+             mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+             lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+             cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+             func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+             cd "$darwin_curdir"
+             $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+           done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+           darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+           darwin_file=
+           darwin_files=
+           for darwin_file in $darwin_filelist; do
+             darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+             lipo -create -output "$darwin_file" $darwin_files
+           done # $darwin_filelist
+           ${rm}r unfat-$$
+           cd "$darwin_orig_dir"
+         else
+           cd "$darwin_orig_dir"
+           func_extract_an_archive "$my_xdir" "$my_xabs"
+         fi # $darwin_arches
+       fi # $run
+       ;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+# Parse our command line options once, thoroughly.
+while test "$#" -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+       $echo "$progname: invalid tag name: $tagname" 1>&2
+       exit $EXIT_FAILURE
+       ;;
+      esac
+
+      case $tagname in
+      CC)
+       # Don't test for the "default" C tag, as we know, it's there, but
+       # not specially marked.
+       ;;
+      *)
+       if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+         taglist="$taglist $tagname"
+         # Evaluate the configuration.
+         eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+       else
+         $echo "$progname: ignoring unknown tag $tagname" 1>&2
+       fi
+       ;;
+      esac
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    $echo
+    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
+    $echo "This is free software; see the source for copying conditions.  There is NO"
+    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
+    ;;
+
+  --config)
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
+    ;;
+
+  --debug)
+    $echo "$progname: enabling shell trace mode"
+    set -x
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    $echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $echo "enable shared libraries"
+    else
+      $echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $echo "enable static libraries"
+    else
+      $echo "disable static libraries"
+    fi
+    exit $?
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
+  --quiet | --silent)
+    show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag) prevopt="--tag" prev=tag ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+fi
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+    case $nonopt in
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+      mode=link
+      for arg
+      do
+       case $arg in
+       -c)
+          mode=compile
+          break
+          ;;
+       esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+       if test -n "$nonopt"; then
+         $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+       else
+         $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+       fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+       # do not "continue".  Instead, add this to base_compile
+       lastarg="$arg"
+       arg_mode=normal
+       ;;
+
+      target )
+       libobj="$arg"
+       arg_mode=normal
+       continue
+       ;;
+
+      normal )
+       # Accept any command-line options.
+       case $arg in
+       -o)
+         if test -n "$libobj" ; then
+           $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         arg_mode=target
+         continue
+         ;;
+
+       -static | -prefer-pic | -prefer-non-pic)
+         later="$later $arg"
+         continue
+         ;;
+
+       -no-suppress)
+         suppress_opt=no
+         continue
+         ;;
+
+       -Xcompiler)
+         arg_mode=arg  #  the next one goes into the "base_compile" arg list
+         continue      #  The current "srcfile" will either be retained or
+         ;;            #  replaced later.  I would guess that would be a bug.
+
+       -Wc,*)
+         args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+         lastarg=
+         save_ifs="$IFS"; IFS=','
+         for arg in $args; do
+           IFS="$save_ifs"
+
+           # Double-quote args containing other shell metacharacters.
+           # Many Bourne shells cannot handle close brackets correctly
+           # in scan sets, so we specify it separately.
+           case $arg in
+             *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \     ]*|*]*|"")
+             arg="\"$arg\""
+             ;;
+           esac
+           lastarg="$lastarg $arg"
+         done
+         IFS="$save_ifs"
+         lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+         # Add the arguments to base_compile.
+         base_compile="$base_compile $lastarg"
+         continue
+         ;;
+
+       * )
+         # Accept the current argument as the source file.
+         # The previous "srcfile" becomes the current argument.
+         #
+         lastarg="$srcfile"
+         srcfile="$arg"
+         ;;
+       esac  #  case $arg
+       ;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      case $lastarg in
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       lastarg="\"$lastarg\""
+       ;;
+      esac
+
+      base_compile="$base_compile $lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
+      ;;
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *)
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSifmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    *.java) xform=java ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+       build_old_libs=yes
+       continue
+       ;;
+
+      -prefer-pic)
+       pic_mode=yes
+       continue
+       ;;
+
+      -prefer-non-pic)
+       pic_mode=no
+       continue
+       ;;
+      esac
+    done
+
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+       && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"'  &()|`$[]' \
+       && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+       $show "Waiting for $lockfile to be removed"
+       sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+       $echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+      $echo "$srcfile" > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+       command="$base_compile $qsrcfile $pic_flag"
+      else
+       # Don't build PIC code
+       command="$base_compile $qsrcfile"
+      fi
+
+      if test ! -d "${xdir}$objdir"; then
+       $show "$mkdir ${xdir}$objdir"
+       $run $mkdir ${xdir}$objdir
+       status=$?
+       if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
+         exit $status
+       fi
+      fi
+
+      if test -z "$output_obj"; then
+       # Place PIC objects in $objdir
+       command="$command -o $lobj"
+      fi
+
+      $run $rm "$lobj" "$output_obj"
+
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+       test -n "$output_obj" && $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+        test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+       $echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+       $show "$mv $output_obj $lobj"
+       if $run $mv $output_obj $lobj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
+      fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+       # Don't build PIC code
+       command="$base_compile $qsrcfile"
+      else
+       command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+       command="$command -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$obj" "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+        test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+       $echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+       $show "$mv $output_obj $obj"
+       if $run $mv $output_obj $obj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+    fi
+
+    $run $mv "${libobj}T" "${libobj}"
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt $@"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static)
+       if test "X$arg" = "X-all-static"; then
+         if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+           $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+         fi
+         if test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+       else
+         if test -z "$pic_flag" && test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+       fi
+       build_libtool_libs=no
+       build_old_libs=yes
+       prefer_static_libs=yes
+       break
+       ;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+       ;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+       case $prev in
+       output)
+         compile_command="$compile_command @OUTPUT@"
+         finalize_command="$finalize_command @OUTPUT@"
+         ;;
+       esac
+
+       case $prev in
+       dlfiles|dlprefiles)
+         if test "$preload" = no; then
+           # Add the symbol object into the linking commands.
+           compile_command="$compile_command @SYMFILE@"
+           finalize_command="$finalize_command @SYMFILE@"
+           preload=yes
+         fi
+         case $arg in
+         *.la | *.lo) ;;  # We handle these cases below.
+         force)
+           if test "$dlself" = no; then
+             dlself=needless
+             export_dynamic=yes
+           fi
+           prev=
+           continue
+           ;;
+         self)
+           if test "$prev" = dlprefiles; then
+             dlself=yes
+           elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+             dlself=yes
+           else
+             dlself=needless
+             export_dynamic=yes
+           fi
+           prev=
+           continue
+           ;;
+         *)
+           if test "$prev" = dlfiles; then
+             dlfiles="$dlfiles $arg"
+           else
+             dlprefiles="$dlprefiles $arg"
+           fi
+           prev=
+           continue
+           ;;
+         esac
+         ;;
+       expsyms)
+         export_symbols="$arg"
+         if test ! -f "$arg"; then
+           $echo "$modename: symbol file \`$arg' does not exist"
+           exit $EXIT_FAILURE
+         fi
+         prev=
+         continue
+         ;;
+       expsyms_regex)
+         export_symbols_regex="$arg"
+         prev=
+         continue
+         ;;
+       inst_prefix)
+         inst_prefix_dir="$arg"
+         prev=
+         continue
+         ;;
+       precious_regex)
+         precious_files_regex="$arg"
+         prev=
+         continue
+         ;;
+       release)
+         release="-$arg"
+         prev=
+         continue
+         ;;
+       objectlist)
+         if test -f "$arg"; then
+           save_arg=$arg
+           moreargs=
+           for fil in `cat $save_arg`
+           do
+#            moreargs="$moreargs $fil"
+             arg=$fil
+             # A libtool-controlled object.
+
+             # Check to see that this really is a libtool object.
+             if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+               pic_object=
+               non_pic_object=
+
+               # Read the .lo file
+               # If there is no directory component, then add one.
+               case $arg in
+               */* | *\\*) . $arg ;;
+               *) . ./$arg ;;
+               esac
+
+               if test -z "$pic_object" || \
+                  test -z "$non_pic_object" ||
+                  test "$pic_object" = none && \
+                  test "$non_pic_object" = none; then
+                 $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+                 exit $EXIT_FAILURE
+               fi
+
+               # Extract subdirectory from the argument.
+               xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+               if test "X$xdir" = "X$arg"; then
+                 xdir=
+               else
+                 xdir="$xdir/"
+               fi
+
+               if test "$pic_object" != none; then
+                 # Prepend the subdirectory the object is found in.
+                 pic_object="$xdir$pic_object"
+
+                 if test "$prev" = dlfiles; then
+                   if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+                     dlfiles="$dlfiles $pic_object"
+                     prev=
+                     continue
+                   else
+                     # If libtool objects are unsupported, then we need to preload.
+                     prev=dlprefiles
+                   fi
+                 fi
+
+                 # CHECK ME:  I think I busted this.  -Ossama
+                 if test "$prev" = dlprefiles; then
+                   # Preload the old-style object.
+                   dlprefiles="$dlprefiles $pic_object"
+                   prev=
+                 fi
+
+                 # A PIC object.
+                 libobjs="$libobjs $pic_object"
+                 arg="$pic_object"
+               fi
+
+               # Non-PIC object.
+               if test "$non_pic_object" != none; then
+                 # Prepend the subdirectory the object is found in.
+                 non_pic_object="$xdir$non_pic_object"
+
+                 # A standard non-PIC object
+                 non_pic_objects="$non_pic_objects $non_pic_object"
+                 if test -z "$pic_object" || test "$pic_object" = none ; then
+                   arg="$non_pic_object"
+                 fi
+               fi
+             else
+               # Only an error if not doing a dry-run.
+               if test -z "$run"; then
+                 $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+                 exit $EXIT_FAILURE
+               else
+                 # Dry-run case.
+
+                 # Extract subdirectory from the argument.
+                 xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+                 if test "X$xdir" = "X$arg"; then
+                   xdir=
+                 else
+                   xdir="$xdir/"
+                 fi
+
+                 pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+                 non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+                 libobjs="$libobjs $pic_object"
+                 non_pic_objects="$non_pic_objects $non_pic_object"
+               fi
+             fi
+           done
+         else
+           $echo "$modename: link input file \`$save_arg' does not exist"
+           exit $EXIT_FAILURE
+         fi
+         arg=$save_arg
+         prev=
+         continue
+         ;;
+       rpath | xrpath)
+         # We need an absolute path.
+         case $arg in
+         [\\/]* | [A-Za-z]:[\\/]*) ;;
+         *)
+           $echo "$modename: only absolute run-paths are allowed" 1>&2
+           exit $EXIT_FAILURE
+           ;;
+         esac
+         if test "$prev" = rpath; then
+           case "$rpath " in
+           *" $arg "*) ;;
+           *) rpath="$rpath $arg" ;;
+           esac
+         else
+           case "$xrpath " in
+           *" $arg "*) ;;
+           *) xrpath="$xrpath $arg" ;;
+           esac
+         fi
+         prev=
+         continue
+         ;;
+       xcompiler)
+         compiler_flags="$compiler_flags $qarg"
+         prev=
+         compile_command="$compile_command $qarg"
+         finalize_command="$finalize_command $qarg"
+         continue
+         ;;
+       xlinker)
+         linker_flags="$linker_flags $qarg"
+         compiler_flags="$compiler_flags $wl$qarg"
+         prev=
+         compile_command="$compile_command $wl$qarg"
+         finalize_command="$finalize_command $wl$qarg"
+         continue
+         ;;
+       xcclinker)
+         linker_flags="$linker_flags $qarg"
+         compiler_flags="$compiler_flags $qarg"
+         prev=
+         compile_command="$compile_command $qarg"
+         finalize_command="$finalize_command $qarg"
+         continue
+         ;;
+       shrext)
+         shrext_cmds="$arg"
+         prev=
+         continue
+         ;;
+        darwin_framework)
+         compiler_flags="$compiler_flags $arg"
+         compile_command="$compile_command $arg"
+         finalize_command="$finalize_command $arg"
+         prev=
+         continue
+         ;;
+       *)
+         eval "$prev=\"\$arg\""
+         prev=
+         continue
+         ;;
+       esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+       if test -n "$link_static_flag"; then
+         compile_command="$compile_command $link_static_flag"
+         finalize_command="$finalize_command $link_static_flag"
+       fi
+       continue
+       ;;
+
+      -allow-undefined)
+       # FIXME: remove this flag sometime in the future.
+       $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+       continue
+       ;;
+
+      -avoid-version)
+       avoid_version=yes
+       continue
+       ;;
+
+      -dlopen)
+       prev=dlfiles
+       continue
+       ;;
+
+      -dlpreopen)
+       prev=dlprefiles
+       continue
+       ;;
+
+      -export-dynamic)
+       export_dynamic=yes
+       continue
+       ;;
+
+      -export-symbols | -export-symbols-regex)
+       if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+         $echo "$modename: more than one -exported-symbols argument is not allowed"
+         exit $EXIT_FAILURE
+       fi
+       if test "X$arg" = "X-export-symbols"; then
+         prev=expsyms
+       else
+         prev=expsyms_regex
+       fi
+       continue
+       ;;
+
+      -framework|-arch)
+        prev=darwin_framework
+        compiler_flags="$compiler_flags $arg"
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+        continue
+        ;;
+
+      -inst-prefix-dir)
+       prev=inst_prefix
+       continue
+       ;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+       case $with_gcc/$host in
+       no/*-*-irix* | /*-*-irix*)
+         compile_command="$compile_command $arg"
+         finalize_command="$finalize_command $arg"
+         ;;
+       esac
+       continue
+       ;;
+
+      -L*)
+       dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+       # We need an absolute path.
+       case $dir in
+       [\\/]* | [A-Za-z]:[\\/]*) ;;
+       *)
+         absdir=`cd "$dir" && pwd`
+         if test -z "$absdir"; then
+           $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         dir="$absdir"
+         ;;
+       esac
+       case "$deplibs " in
+       *" -L$dir "*) ;;
+       *)
+         deplibs="$deplibs -L$dir"
+         lib_search_path="$lib_search_path $dir"
+         ;;
+       esac
+       case $host in
+       *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+         case :$dllsearchpath: in
+         *":$dir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$dir";;
+         esac
+         ;;
+       esac
+       continue
+       ;;
+
+      -l*)
+       if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+         case $host in
+         *-*-cygwin* | *-*-pw32* | *-*-beos*)
+           # These systems don't actually have a C or math library (as such)
+           continue
+           ;;
+         *-*-mingw* | *-*-os2*)
+           # These systems don't actually have a C library (as such)
+           test "X$arg" = "X-lc" && continue
+           ;;
+         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+           # Do not include libc due to us having libc/libc_r.
+           test "X$arg" = "X-lc" && continue
+           ;;
+         *-*-rhapsody* | *-*-darwin1.[012])
+           # Rhapsody C and math libraries are in the System framework
+           deplibs="$deplibs -framework System"
+           continue
+         esac
+       elif test "X$arg" = "X-lc_r"; then
+        case $host in
+        *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+          # Do not include libc_r directly, use -pthread flag.
+          continue
+          ;;
+        esac
+       fi
+       deplibs="$deplibs $arg"
+       continue
+       ;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+       compile_command="$compile_command $arg"
+       compiler_flags="$compiler_flags $arg"
+       finalize_command="$finalize_command $arg"
+       prev=xcompiler
+       continue
+       ;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+       compiler_flags="$compiler_flags $arg"
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+       continue
+       ;;
+
+      -module)
+       module=yes
+       continue
+       ;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case $arg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        if test "$with_gcc" = "yes" ; then
+          compiler_flags="$compiler_flags $arg"
+        fi
+        continue
+        ;;
+
+      -shrext)
+       prev=shrext
+       continue
+       ;;
+
+      -no-fast-install)
+       fast_install=no
+       continue
+       ;;
+
+      -no-install)
+       case $host in
+       *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+         # The PATH hackery in wrapper scripts is required on Windows
+         # in order for the loader to find any dlls it needs.
+         $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+         $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+         fast_install=no
+         ;;
+       *) no_install=yes ;;
+       esac
+       continue
+       ;;
+
+      -no-undefined)
+       allow_undefined=no
+       continue
+       ;;
+
+      -objectlist)
+       prev=objectlist
+       continue
+       ;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+       prev=precious_regex
+       continue
+       ;;
+
+      -release)
+       prev=release
+       continue
+       ;;
+
+      -rpath)
+       prev=rpath
+       continue
+       ;;
+
+      -R)
+       prev=xrpath
+       continue
+       ;;
+
+      -R*)
+       dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+       # We need an absolute path.
+       case $dir in
+       [\\/]* | [A-Za-z]:[\\/]*) ;;
+       *)
+         $echo "$modename: only absolute run-paths are allowed" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+       case "$xrpath " in
+       *" $dir "*) ;;
+       *) xrpath="$xrpath $dir" ;;
+       esac
+       continue
+       ;;
+
+      -static)
+       # The effects of -static are defined in a previous loop.
+       # We used to do the same as -all-static on platforms that
+       # didn't have a PIC flag, but the assumption that the effects
+       # would be equivalent was wrong.  It would break on at least
+       # Digital Unix and AIX.
+       continue
+       ;;
+
+      -thread-safe)
+       thread_safe=yes
+       continue
+       ;;
+
+      -version-info)
+       prev=vinfo
+       continue
+       ;;
+      -version-number)
+       prev=vinfo
+       vinfo_number=yes
+       continue
+       ;;
+
+      -Wc,*)
+       args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+       arg=
+       save_ifs="$IFS"; IFS=','
+       for flag in $args; do
+         IFS="$save_ifs"
+         case $flag in
+           *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+           flag="\"$flag\""
+           ;;
+         esac
+         arg="$arg $wl$flag"
+         compiler_flags="$compiler_flags $flag"
+       done
+       IFS="$save_ifs"
+       arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+       ;;
+
+      -Wl,*)
+       args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+       arg=
+       save_ifs="$IFS"; IFS=','
+       for flag in $args; do
+         IFS="$save_ifs"
+         case $flag in
+           *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \       ]*|*]*|"")
+           flag="\"$flag\""
+           ;;
+         esac
+         arg="$arg $wl$flag"
+         compiler_flags="$compiler_flags $wl$flag"
+         linker_flags="$linker_flags $flag"
+       done
+       IFS="$save_ifs"
+       arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+       ;;
+
+      -Xcompiler)
+       prev=xcompiler
+       continue
+       ;;
+
+      -Xlinker)
+       prev=xlinker
+       continue
+       ;;
+
+      -XCClinker)
+       prev=xcclinker
+       continue
+       ;;
+
+      # Some other compiler flag.
+      -* | +*)
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case $arg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+       ;;
+
+      *.$objext)
+       # A standard object.
+       objs="$objs $arg"
+       ;;
+
+      *.lo)
+       # A libtool-controlled object.
+
+       # Check to see that this really is a libtool object.
+       if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+         pic_object=
+         non_pic_object=
+
+         # Read the .lo file
+         # If there is no directory component, then add one.
+         case $arg in
+         */* | *\\*) . $arg ;;
+         *) . ./$arg ;;
+         esac
+
+         if test -z "$pic_object" || \
+            test -z "$non_pic_object" ||
+            test "$pic_object" = none && \
+            test "$non_pic_object" = none; then
+           $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+
+         # Extract subdirectory from the argument.
+         xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+         if test "X$xdir" = "X$arg"; then
+           xdir=
+         else
+           xdir="$xdir/"
+         fi
+
+         if test "$pic_object" != none; then
+           # Prepend the subdirectory the object is found in.
+           pic_object="$xdir$pic_object"
+
+           if test "$prev" = dlfiles; then
+             if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+               dlfiles="$dlfiles $pic_object"
+               prev=
+               continue
+             else
+               # If libtool objects are unsupported, then we need to preload.
+               prev=dlprefiles
+             fi
+           fi
+
+           # CHECK ME:  I think I busted this.  -Ossama
+           if test "$prev" = dlprefiles; then
+             # Preload the old-style object.
+             dlprefiles="$dlprefiles $pic_object"
+             prev=
+           fi
+
+           # A PIC object.
+           libobjs="$libobjs $pic_object"
+           arg="$pic_object"
+         fi
+
+         # Non-PIC object.
+         if test "$non_pic_object" != none; then
+           # Prepend the subdirectory the object is found in.
+           non_pic_object="$xdir$non_pic_object"
+
+           # A standard non-PIC object
+           non_pic_objects="$non_pic_objects $non_pic_object"
+           if test -z "$pic_object" || test "$pic_object" = none ; then
+             arg="$non_pic_object"
+           fi
+         fi
+       else
+         # Only an error if not doing a dry-run.
+         if test -z "$run"; then
+           $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+           exit $EXIT_FAILURE
+         else
+           # Dry-run case.
+
+           # Extract subdirectory from the argument.
+           xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+           if test "X$xdir" = "X$arg"; then
+             xdir=
+           else
+             xdir="$xdir/"
+           fi
+
+           pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+           non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+           libobjs="$libobjs $pic_object"
+           non_pic_objects="$non_pic_objects $non_pic_object"
+         fi
+       fi
+       ;;
+
+      *.$libext)
+       # An archive.
+       deplibs="$deplibs $arg"
+       old_deplibs="$old_deplibs $arg"
+       continue
+       ;;
+
+      *.la)
+       # A libtool-controlled library.
+
+       if test "$prev" = dlfiles; then
+         # This library was specified with -dlopen.
+         dlfiles="$dlfiles $arg"
+         prev=
+       elif test "$prev" = dlprefiles; then
+         # The library was specified with -dlpreopen.
+         dlprefiles="$dlprefiles $arg"
+         prev=
+       else
+         deplibs="$deplibs $arg"
+       fi
+       continue
+       ;;
+
+      # Some other compiler argument.
+      *)
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case $arg in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*|"")
+         arg="\"$arg\""
+         ;;
+       esac
+       ;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d "$output_objdir"; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      status=$?
+      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
+       exit $status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+       case "$libs " in
+       *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+       esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+       for pre_post_dep in $predeps $postdeps; do
+         case "$pre_post_deps " in
+         *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+         esac
+         pre_post_deps="$pre_post_deps $pre_post_dep"
+       done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+    case $linkmode in
+    lib)
+       passes="conv link"
+       for file in $dlfiles $dlprefiles; do
+         case $file in
+         *.la) ;;
+         *)
+           $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+           exit $EXIT_FAILURE
+           ;;
+         esac
+       done
+       ;;
+    prog)
+       compile_deplibs=
+       finalize_deplibs=
+       alldeplibs=no
+       newdlfiles=
+       newdlprefiles=
+       passes="conv scan dlopen dlpreopen link"
+       ;;
+    *)  passes="conv"
+       ;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+        test "$linkmode,$pass" = "prog,scan"; then
+       libs="$deplibs"
+       deplibs=
+      fi
+      if test "$linkmode" = prog; then
+       case $pass in
+       dlopen) libs="$dlfiles" ;;
+       dlpreopen) libs="$dlprefiles" ;;
+       link)
+         libs="$deplibs %DEPLIBS%"
+         test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+         ;;
+       esac
+      fi
+      if test "$pass" = dlopen; then
+       # Collect dlpreopened libraries
+       save_deplibs="$deplibs"
+       deplibs=
+      fi
+      for deplib in $libs; do
+       lib=
+       found=no
+       case $deplib in
+       -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+         if test "$linkmode,$pass" = "prog,link"; then
+           compile_deplibs="$deplib $compile_deplibs"
+           finalize_deplibs="$deplib $finalize_deplibs"
+         else
+           compiler_flags="$compiler_flags $deplib"
+         fi
+         continue
+         ;;
+       -l*)
+         if test "$linkmode" != lib && test "$linkmode" != prog; then
+           $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+           continue
+         fi
+         name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+         for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+           for search_ext in .la $std_shrext .so .a; do
+             # Search the libtool library
+             lib="$searchdir/lib${name}${search_ext}"
+             if test -f "$lib"; then
+               if test "$search_ext" = ".la"; then
+                 found=yes
+               else
+                 found=no
+               fi
+               break 2
+             fi
+           done
+         done
+         if test "$found" != yes; then
+           # deplib doesn't seem to be a libtool library
+           if test "$linkmode,$pass" = "prog,link"; then
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           else
+             deplibs="$deplib $deplibs"
+             test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+           fi
+           continue
+         else # deplib is a libtool library
+           # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+           # We need to do some special things here, and not later.
+           if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+             case " $predeps $postdeps " in
+             *" $deplib "*)
+               if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+                 library_names=
+                 old_library=
+                 case $lib in
+                 */* | *\\*) . $lib ;;
+                 *) . ./$lib ;;
+                 esac
+                 for l in $old_library $library_names; do
+                   ll="$l"
+                 done
+                 if test "X$ll" = "X$old_library" ; then # only static version available
+                   found=no
+                   ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+                   test "X$ladir" = "X$lib" && ladir="."
+                   lib=$ladir/$old_library
+                   if test "$linkmode,$pass" = "prog,link"; then
+                     compile_deplibs="$deplib $compile_deplibs"
+                     finalize_deplibs="$deplib $finalize_deplibs"
+                   else
+                     deplibs="$deplib $deplibs"
+                     test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+                   fi
+                   continue
+                 fi
+               fi
+               ;;
+             *) ;;
+             esac
+           fi
+         fi
+         ;; # -l
+       -L*)
+         case $linkmode in
+         lib)
+           deplibs="$deplib $deplibs"
+           test "$pass" = conv && continue
+           newdependency_libs="$deplib $newdependency_libs"
+           newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+           ;;
+         prog)
+           if test "$pass" = conv; then
+             deplibs="$deplib $deplibs"
+             continue
+           fi
+           if test "$pass" = scan; then
+             deplibs="$deplib $deplibs"
+           else
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           fi
+           newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+           ;;
+         *)
+           $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+           ;;
+         esac # linkmode
+         continue
+         ;; # -L
+       -R*)
+         if test "$pass" = link; then
+           dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+           # Make sure the xrpath contains only unique directories.
+           case "$xrpath " in
+           *" $dir "*) ;;
+           *) xrpath="$xrpath $dir" ;;
+           esac
+         fi
+         deplibs="$deplib $deplibs"
+         continue
+         ;;
+       *.la) lib="$deplib" ;;
+       *.$libext)
+         if test "$pass" = conv; then
+           deplibs="$deplib $deplibs"
+           continue
+         fi
+         case $linkmode in
+         lib)
+           valid_a_lib=no
+           case $deplibs_check_method in
+             match_pattern*)
+               set dummy $deplibs_check_method
+               match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+               if eval $echo \"$deplib\" 2>/dev/null \
+                   | $SED 10q \
+                   | $EGREP "$match_pattern_regex" > /dev/null; then
+                 valid_a_lib=yes
+               fi
+               ;;
+             pass_all)
+               valid_a_lib=yes
+               ;;
+            esac
+           if test "$valid_a_lib" != yes; then
+             $echo
+             $echo "*** Warning: Trying to link with static lib archive $deplib."
+             $echo "*** I have the capability to make that library automatically link in when"
+             $echo "*** you link to this library.  But I can only do this if you have a"
+             $echo "*** shared version of the library, which you do not appear to have"
+             $echo "*** because the file extensions .$libext of this argument makes me believe"
+             $echo "*** that it is just a static archive that I should not used here."
+           else
+             $echo
+             $echo "*** Warning: Linking the shared library $output against the"
+             $echo "*** static library $deplib is not portable!"
+             deplibs="$deplib $deplibs"
+           fi
+           continue
+           ;;
+         prog)
+           if test "$pass" != link; then
+             deplibs="$deplib $deplibs"
+           else
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           fi
+           continue
+           ;;
+         esac # linkmode
+         ;; # *.$libext
+       *.lo | *.$objext)
+         if test "$pass" = conv; then
+           deplibs="$deplib $deplibs"
+         elif test "$linkmode" = prog; then
+           if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+             # If there is no dlopen support or we're linking statically,
+             # we need to preload.
+             newdlprefiles="$newdlprefiles $deplib"
+             compile_deplibs="$deplib $compile_deplibs"
+             finalize_deplibs="$deplib $finalize_deplibs"
+           else
+             newdlfiles="$newdlfiles $deplib"
+           fi
+         fi
+         continue
+         ;;
+       %DEPLIBS%)
+         alldeplibs=yes
+         continue
+         ;;
+       esac # case $deplib
+       if test "$found" = yes || test -f "$lib"; then :
+       else
+         $echo "$modename: cannot find the library \`$lib'" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # Check to see that this really is a libtool archive.
+       if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+       test "X$ladir" = "X$lib" && ladir="."
+
+       dlname=
+       dlopen=
+       dlpreopen=
+       libdir=
+       library_names=
+       old_library=
+       # If the library was installed with an old release of libtool,
+       # it will not redefine variables installed, or shouldnotlink
+       installed=yes
+       shouldnotlink=no
+       avoidtemprpath=
+
+
+       # Read the .la file
+       case $lib in
+       */* | *\\*) . $lib ;;
+       *) . ./$lib ;;
+       esac
+
+       if test "$linkmode,$pass" = "lib,link" ||
+          test "$linkmode,$pass" = "prog,scan" ||
+          { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+         test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+         test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+       fi
+
+       if test "$pass" = conv; then
+         # Only check for convenience libraries
+         deplibs="$lib $deplibs"
+         if test -z "$libdir"; then
+           if test -z "$old_library"; then
+             $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+             exit $EXIT_FAILURE
+           fi
+           # It is a libtool convenience library, so add in its objects.
+           convenience="$convenience $ladir/$objdir/$old_library"
+           old_convenience="$old_convenience $ladir/$objdir/$old_library"
+           tmp_libs=
+           for deplib in $dependency_libs; do
+             deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+               case "$tmp_libs " in
+               *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+               esac
+              fi
+             tmp_libs="$tmp_libs $deplib"
+           done
+         elif test "$linkmode" != prog && test "$linkmode" != lib; then
+           $echo "$modename: \`$lib' is not a convenience library" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         continue
+       fi # $pass = conv
+
+
+       # Get the name of the library we link against.
+       linklib=
+       for l in $old_library $library_names; do
+         linklib="$l"
+       done
+       if test -z "$linklib"; then
+         $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # This library was specified with -dlopen.
+       if test "$pass" = dlopen; then
+         if test -z "$libdir"; then
+           $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         if test -z "$dlname" ||
+            test "$dlopen_support" != yes ||
+            test "$build_libtool_libs" = no; then
+           # If there is no dlname, no dlopen support or we're linking
+           # statically, we need to preload.  We also need to preload any
+           # dependent libraries so libltdl's deplib preloader doesn't
+           # bomb out in the load deplibs phase.
+           dlprefiles="$dlprefiles $lib $dependency_libs"
+         else
+           newdlfiles="$newdlfiles $lib"
+         fi
+         continue
+       fi # $pass = dlopen
+
+       # We need an absolute path.
+       case $ladir in
+       [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+       *)
+         abs_ladir=`cd "$ladir" && pwd`
+         if test -z "$abs_ladir"; then
+           $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+           $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+           abs_ladir="$ladir"
+         fi
+         ;;
+       esac
+       laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+       # Find the relevant object directory and library name.
+       if test "X$installed" = Xyes; then
+         if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+           $echo "$modename: warning: library \`$lib' was moved." 1>&2
+           dir="$ladir"
+           absdir="$abs_ladir"
+           libdir="$abs_ladir"
+         else
+           dir="$libdir"
+           absdir="$libdir"
+         fi
+         test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+       else
+         if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+           dir="$ladir"
+           absdir="$abs_ladir"
+           # Remove this search path later
+           notinst_path="$notinst_path $abs_ladir"
+         else
+           dir="$ladir/$objdir"
+           absdir="$abs_ladir/$objdir"
+           # Remove this search path later
+           notinst_path="$notinst_path $abs_ladir"
+         fi
+       fi # $installed = yes
+       name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+       # This library was specified with -dlpreopen.
+       if test "$pass" = dlpreopen; then
+         if test -z "$libdir"; then
+           $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+         # Prefer using a static library (so that no silly _DYNAMIC symbols
+         # are required to link).
+         if test -n "$old_library"; then
+           newdlprefiles="$newdlprefiles $dir/$old_library"
+         # Otherwise, use the dlname, so that lt_dlopen finds it.
+         elif test -n "$dlname"; then
+           newdlprefiles="$newdlprefiles $dir/$dlname"
+         else
+           newdlprefiles="$newdlprefiles $dir/$linklib"
+         fi
+       fi # $pass = dlpreopen
+
+       if test -z "$libdir"; then
+         # Link the convenience library
+         if test "$linkmode" = lib; then
+           deplibs="$dir/$old_library $deplibs"
+         elif test "$linkmode,$pass" = "prog,link"; then
+           compile_deplibs="$dir/$old_library $compile_deplibs"
+           finalize_deplibs="$dir/$old_library $finalize_deplibs"
+         else
+           deplibs="$lib $deplibs" # used for prog,scan pass
+         fi
+         continue
+       fi
+
+
+       if test "$linkmode" = prog && test "$pass" != link; then
+         newlib_search_path="$newlib_search_path $ladir"
+         deplibs="$lib $deplibs"
+
+         linkalldeplibs=no
+         if test "$link_all_deplibs" != no || test -z "$library_names" ||
+            test "$build_libtool_libs" = no; then
+           linkalldeplibs=yes
+         fi
+
+         tmp_libs=
+         for deplib in $dependency_libs; do
+           case $deplib in
+           -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+           esac
+           # Need to link against all dependency_libs?
+           if test "$linkalldeplibs" = yes; then
+             deplibs="$deplib $deplibs"
+           else
+             # Need to hardcode shared library paths
+             # or/and link against static libraries
+             newdependency_libs="$deplib $newdependency_libs"
+           fi
+           if test "X$duplicate_deps" = "Xyes" ; then
+             case "$tmp_libs " in
+             *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+             esac
+           fi
+           tmp_libs="$tmp_libs $deplib"
+         done # for deplib
+         continue
+       fi # $linkmode = prog...
+
+       if test "$linkmode,$pass" = "prog,link"; then
+         if test -n "$library_names" &&
+            { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+           # We need to hardcode the library path
+           if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+             # Make sure the rpath contains only unique directories.
+             case "$temp_rpath " in
+             *" $dir "*) ;;
+             *" $absdir "*) ;;
+             *) temp_rpath="$temp_rpath $absdir" ;;
+             esac
+           fi
+
+           # Hardcode the library path.
+           # Skip directories that are in the system default run-time
+           # search path.
+           case " $sys_lib_dlsearch_path " in
+           *" $absdir "*) ;;
+           *)
+             case "$compile_rpath " in
+             *" $absdir "*) ;;
+             *) compile_rpath="$compile_rpath $absdir"
+             esac
+             ;;
+           esac
+           case " $sys_lib_dlsearch_path " in
+           *" $libdir "*) ;;
+           *)
+             case "$finalize_rpath " in
+             *" $libdir "*) ;;
+             *) finalize_rpath="$finalize_rpath $libdir"
+             esac
+             ;;
+           esac
+         fi # $linkmode,$pass = prog,link...
+
+         if test "$alldeplibs" = yes &&
+            { test "$deplibs_check_method" = pass_all ||
+              { test "$build_libtool_libs" = yes &&
+                test -n "$library_names"; }; }; then
+           # We only need to search for static libraries
+           continue
+         fi
+       fi
+
+       link_static=no # Whether the deplib will be linked statically
+       if test -n "$library_names" &&
+          { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+         if test "$installed" = no; then
+           notinst_deplibs="$notinst_deplibs $lib"
+           need_relink=yes
+         fi
+         # This is a shared library
+
+         # Warn about portability, can't link against -module's on
+         # some systems (darwin)
+         if test "$shouldnotlink" = yes && test "$pass" = link ; then
+           $echo
+           if test "$linkmode" = prog; then
+             $echo "*** Warning: Linking the executable $output against the loadable module"
+           else
+             $echo "*** Warning: Linking the shared library $output against the loadable module"
+           fi
+           $echo "*** $linklib is not portable!"
+         fi
+         if test "$linkmode" = lib &&
+            test "$hardcode_into_libs" = yes; then
+           # Hardcode the library path.
+           # Skip directories that are in the system default run-time
+           # search path.
+           case " $sys_lib_dlsearch_path " in
+           *" $absdir "*) ;;
+           *)
+             case "$compile_rpath " in
+             *" $absdir "*) ;;
+             *) compile_rpath="$compile_rpath $absdir"
+             esac
+             ;;
+           esac
+           case " $sys_lib_dlsearch_path " in
+           *" $libdir "*) ;;
+           *)
+             case "$finalize_rpath " in
+             *" $libdir "*) ;;
+             *) finalize_rpath="$finalize_rpath $libdir"
+             esac
+             ;;
+           esac
+         fi
+
+         if test -n "$old_archive_from_expsyms_cmds"; then
+           # figure out the soname
+           set dummy $library_names
+           realname="$2"
+           shift; shift
+           libname=`eval \\$echo \"$libname_spec\"`
+           # use dlname if we got it. it's perfectly good, no?
+           if test -n "$dlname"; then
+             soname="$dlname"
+           elif test -n "$soname_spec"; then
+             # bleh windows
+             case $host in
+             *cygwin* | mingw*)
+               major=`expr $current - $age`
+               versuffix="-$major"
+               ;;
+             esac
+             eval soname=\"$soname_spec\"
+           else
+             soname="$realname"
+           fi
+
+           # Make a new name for the extract_expsyms_cmds to use
+           soroot="$soname"
+           soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+           newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+           # If the library has no export list, then create one now
+           if test -f "$output_objdir/$soname-def"; then :
+           else
+             $show "extracting exported symbol list from \`$soname'"
+             save_ifs="$IFS"; IFS='~'
+             cmds=$extract_expsyms_cmds
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd" || exit $?
+             done
+             IFS="$save_ifs"
+           fi
+
+           # Create $newlib
+           if test -f "$output_objdir/$newlib"; then :; else
+             $show "generating import library for \`$soname'"
+             save_ifs="$IFS"; IFS='~'
+             cmds=$old_archive_from_expsyms_cmds
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd" || exit $?
+             done
+             IFS="$save_ifs"
+           fi
+           # make sure the library variables are pointing to the new library
+           dir=$output_objdir
+           linklib=$newlib
+         fi # test -n "$old_archive_from_expsyms_cmds"
+
+         if test "$linkmode" = prog || test "$mode" != relink; then
+           add_shlibpath=
+           add_dir=
+           add=
+           lib_linked=yes
+           case $hardcode_action in
+           immediate | unsupported)
+             if test "$hardcode_direct" = no; then
+               add="$dir/$linklib"
+               case $host in
+                 *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+                 *-*-darwin* )
+                   # if the lib is a module then we can not link against
+                   # it, someone is ignoring the new warnings I added
+                   if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+                     $echo "** Warning, lib $linklib is a module, not a shared library"
+                     if test -z "$old_library" ; then
+                       $echo
+                       $echo "** And there doesn't seem to be a static archive available"
+                       $echo "** The link will probably fail, sorry"
+                     else
+                       add="$dir/$old_library"
+                     fi
+                   fi
+               esac
+             elif test "$hardcode_minus_L" = no; then
+               case $host in
+               *-*-sunos*) add_shlibpath="$dir" ;;
+               esac
+               add_dir="-L$dir"
+               add="-l$name"
+             elif test "$hardcode_shlibpath_var" = no; then
+               add_shlibpath="$dir"
+               add="-l$name"
+             else
+               lib_linked=no
+             fi
+             ;;
+           relink)
+             if test "$hardcode_direct" = yes; then
+               add="$dir/$linklib"
+             elif test "$hardcode_minus_L" = yes; then
+               add_dir="-L$dir"
+               # Try looking first in the location we're being installed to.
+               if test -n "$inst_prefix_dir"; then
+                 case $libdir in
+                   [\\/]*)
+                     add_dir="$add_dir -L$inst_prefix_dir$libdir"
+                     ;;
+                 esac
+               fi
+               add="-l$name"
+             elif test "$hardcode_shlibpath_var" = yes; then
+               add_shlibpath="$dir"
+               add="-l$name"
+             else
+               lib_linked=no
+             fi
+             ;;
+           *) lib_linked=no ;;
+           esac
+
+           if test "$lib_linked" != yes; then
+             $echo "$modename: configuration error: unsupported hardcode properties"
+             exit $EXIT_FAILURE
+           fi
+
+           if test -n "$add_shlibpath"; then
+             case :$compile_shlibpath: in
+             *":$add_shlibpath:"*) ;;
+             *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+             esac
+           fi
+           if test "$linkmode" = prog; then
+             test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+             test -n "$add" && compile_deplibs="$add $compile_deplibs"
+           else
+             test -n "$add_dir" && deplibs="$add_dir $deplibs"
+             test -n "$add" && deplibs="$add $deplibs"
+             if test "$hardcode_direct" != yes && \
+                test "$hardcode_minus_L" != yes && \
+                test "$hardcode_shlibpath_var" = yes; then
+               case :$finalize_shlibpath: in
+               *":$libdir:"*) ;;
+               *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+               esac
+             fi
+           fi
+         fi
+
+         if test "$linkmode" = prog || test "$mode" = relink; then
+           add_shlibpath=
+           add_dir=
+           add=
+           # Finalize command for both is simple: just hardcode it.
+           if test "$hardcode_direct" = yes; then
+             add="$libdir/$linklib"
+           elif test "$hardcode_minus_L" = yes; then
+             add_dir="-L$libdir"
+             add="-l$name"
+           elif test "$hardcode_shlibpath_var" = yes; then
+             case :$finalize_shlibpath: in
+             *":$libdir:"*) ;;
+             *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+             esac
+             add="-l$name"
+           elif test "$hardcode_automatic" = yes; then
+             if test -n "$inst_prefix_dir" &&
+                test -f "$inst_prefix_dir$libdir/$linklib" ; then
+               add="$inst_prefix_dir$libdir/$linklib"
+             else
+               add="$libdir/$linklib"
+             fi
+           else
+             # We cannot seem to hardcode it, guess we'll fake it.
+             add_dir="-L$libdir"
+             # Try looking first in the location we're being installed to.
+             if test -n "$inst_prefix_dir"; then
+               case $libdir in
+                 [\\/]*)
+                   add_dir="$add_dir -L$inst_prefix_dir$libdir"
+                   ;;
+               esac
+             fi
+             add="-l$name"
+           fi
+
+           if test "$linkmode" = prog; then
+             test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+             test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+           else
+             test -n "$add_dir" && deplibs="$add_dir $deplibs"
+             test -n "$add" && deplibs="$add $deplibs"
+           fi
+         fi
+       elif test "$linkmode" = prog; then
+         # Here we assume that one of hardcode_direct or hardcode_minus_L
+         # is not unsupported.  This is valid on all known static and
+         # shared platforms.
+         if test "$hardcode_direct" != unsupported; then
+           test -n "$old_library" && linklib="$old_library"
+           compile_deplibs="$dir/$linklib $compile_deplibs"
+           finalize_deplibs="$dir/$linklib $finalize_deplibs"
+         else
+           compile_deplibs="-l$name -L$dir $compile_deplibs"
+           finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+         fi
+       elif test "$build_libtool_libs" = yes; then
+         # Not a shared library
+         if test "$deplibs_check_method" != pass_all; then
+           # We're trying link a shared library against a static one
+           # but the system doesn't support it.
+
+           # Just print a warning and add the library to dependency_libs so
+           # that the program can be linked against the static library.
+           $echo
+           $echo "*** Warning: This system can not link to static lib archive $lib."
+           $echo "*** I have the capability to make that library automatically link in when"
+           $echo "*** you link to this library.  But I can only do this if you have a"
+           $echo "*** shared version of the library, which you do not appear to have."
+           if test "$module" = yes; then
+             $echo "*** But as you try to build a module library, libtool will still create "
+             $echo "*** a static module, that should work as long as the dlopening application"
+             $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+             if test -z "$global_symbol_pipe"; then
+               $echo
+               $echo "*** However, this would only work if libtool was able to extract symbol"
+               $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+               $echo "*** not find such a program.  So, this module is probably useless."
+               $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+             fi
+             if test "$build_old_libs" = no; then
+               build_libtool_libs=module
+               build_old_libs=yes
+             else
+               build_libtool_libs=no
+             fi
+           fi
+         else
+           deplibs="$dir/$old_library $deplibs"
+           link_static=yes
+         fi
+       fi # link shared/static library?
+
+       if test "$linkmode" = lib; then
+         if test -n "$dependency_libs" &&
+            { test "$hardcode_into_libs" != yes ||
+              test "$build_old_libs" = yes ||
+              test "$link_static" = yes; }; then
+           # Extract -R from dependency_libs
+           temp_deplibs=
+           for libdir in $dependency_libs; do
+             case $libdir in
+             -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+                  case " $xrpath " in
+                  *" $temp_xrpath "*) ;;
+                  *) xrpath="$xrpath $temp_xrpath";;
+                  esac;;
+             *) temp_deplibs="$temp_deplibs $libdir";;
+             esac
+           done
+           dependency_libs="$temp_deplibs"
+         fi
+
+         newlib_search_path="$newlib_search_path $absdir"
+         # Link against this library
+         test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+         # ... and its dependency_libs
+         tmp_libs=
+         for deplib in $dependency_libs; do
+           newdependency_libs="$deplib $newdependency_libs"
+           if test "X$duplicate_deps" = "Xyes" ; then
+             case "$tmp_libs " in
+             *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+             esac
+           fi
+           tmp_libs="$tmp_libs $deplib"
+         done
+
+         if test "$link_all_deplibs" != no; then
+           # Add the search paths of all dependency libraries
+           for deplib in $dependency_libs; do
+             case $deplib in
+             -L*) path="$deplib" ;;
+             *.la)
+               dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+               test "X$dir" = "X$deplib" && dir="."
+               # We need an absolute path.
+               case $dir in
+               [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+               *)
+                 absdir=`cd "$dir" && pwd`
+                 if test -z "$absdir"; then
+                   $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+                   absdir="$dir"
+                 fi
+                 ;;
+               esac
+               if grep "^installed=no" $deplib > /dev/null; then
+                 path="$absdir/$objdir"
+               else
+                 eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+                 if test -z "$libdir"; then
+                   $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+                   exit $EXIT_FAILURE
+                 fi
+                 if test "$absdir" != "$libdir"; then
+                   $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+                 fi
+                 path="$absdir"
+               fi
+               depdepl=
+               case $host in
+               *-*-darwin*)
+                 # we do not want to link against static libs,
+                 # but need to link against shared
+                 eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+                 if test -n "$deplibrary_names" ; then
+                   for tmp in $deplibrary_names ; do
+                     depdepl=$tmp
+                   done
+                   if test -f "$path/$depdepl" ; then
+                     depdepl="$path/$depdepl"
+                   fi
+                   # do not add paths which are already there
+                   case " $newlib_search_path " in
+                   *" $path "*) ;;
+                   *) newlib_search_path="$newlib_search_path $path";;
+                   esac
+                 fi
+                 path=""
+                 ;;
+               *)
+                 path="-L$path"
+                 ;;
+               esac
+               ;;
+             -l*)
+               case $host in
+               *-*-darwin*)
+                 # Again, we only want to link against shared libraries
+                 eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+                 for tmp in $newlib_search_path ; do
+                   if test -f "$tmp/lib$tmp_libs.dylib" ; then
+                     eval depdepl="$tmp/lib$tmp_libs.dylib"
+                     break
+                   fi
+                 done
+                 path=""
+                 ;;
+               *) continue ;;
+               esac
+               ;;
+             *) continue ;;
+             esac
+             case " $deplibs " in
+             *" $path "*) ;;
+             *) deplibs="$path $deplibs" ;;
+             esac
+             case " $deplibs " in
+             *" $depdepl "*) ;;
+             *) deplibs="$depdepl $deplibs" ;;
+             esac
+           done
+         fi # link_all_deplibs != no
+       fi # linkmode = lib
+      done # for deplib in $libs
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+       # Link the dlpreopened libraries before other libraries
+       for deplib in $save_deplibs; do
+         deplibs="$deplib $deplibs"
+       done
+      fi
+      if test "$pass" != dlopen; then
+       if test "$pass" != conv; then
+         # Make sure lib_search_path contains only unique directories.
+         lib_search_path=
+         for dir in $newlib_search_path; do
+           case "$lib_search_path " in
+           *" $dir "*) ;;
+           *) lib_search_path="$lib_search_path $dir" ;;
+           esac
+         done
+         newlib_search_path=
+       fi
+
+       if test "$linkmode,$pass" != "prog,link"; then
+         vars="deplibs"
+       else
+         vars="compile_deplibs finalize_deplibs"
+       fi
+       for var in $vars dependency_libs; do
+         # Add libraries to $var in reverse order
+         eval tmp_libs=\"\$$var\"
+         new_libs=
+         for deplib in $tmp_libs; do
+           # FIXME: Pedantically, this is the right thing to do, so
+           #        that some nasty dependency loop isn't accidentally
+           #        broken:
+           #new_libs="$deplib $new_libs"
+           # Pragmatically, this seems to cause very few problems in
+           # practice:
+           case $deplib in
+           -L*) new_libs="$deplib $new_libs" ;;
+           -R*) ;;
+           *)
+             # And here is the reason: when a library appears more
+             # than once as an explicit dependence of a library, or
+             # is implicitly linked in more than once by the
+             # compiler, it is considered special, and multiple
+             # occurrences thereof are not removed.  Compare this
+             # with having the same library being listed as a
+             # dependency of multiple other libraries: in this case,
+             # we know (pedantically, we assume) the library does not
+             # need to be listed more than once, so we keep only the
+             # last copy.  This is not always right, but it is rare
+             # enough that we require users that really mean to play
+             # such unportable linking tricks to link the library
+             # using -Wl,-lname, so that libtool does not consider it
+             # for duplicate removal.
+             case " $specialdeplibs " in
+             *" $deplib "*) new_libs="$deplib $new_libs" ;;
+             *)
+               case " $new_libs " in
+               *" $deplib "*) ;;
+               *) new_libs="$deplib $new_libs" ;;
+               esac
+               ;;
+             esac
+             ;;
+           esac
+         done
+         tmp_libs=
+         for deplib in $new_libs; do
+           case $deplib in
+           -L*)
+             case " $tmp_libs " in
+             *" $deplib "*) ;;
+             *) tmp_libs="$tmp_libs $deplib" ;;
+             esac
+             ;;
+           *) tmp_libs="$tmp_libs $deplib" ;;
+           esac
+         done
+         eval $var=\"$tmp_libs\"
+       done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+       case " $predeps $postdeps $compiler_lib_search_path " in
+       *" $i "*)
+         i=""
+         ;;
+       esac
+       if test -n "$i" ; then
+         tmp_libs="$tmp_libs $i"
+       fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$deplibs"; then
+       $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+       $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+       $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+       $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+       name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+       eval shared_ext=\"$shrext_cmds\"
+       eval libname=\"$libname_spec\"
+       ;;
+      *)
+       if test "$module" = no; then
+         $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+       if test "$need_lib_prefix" != no; then
+         # Add the "lib" prefix for modules if required
+         name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+         eval shared_ext=\"$shrext_cmds\"
+         eval libname=\"$libname_spec\"
+       else
+         libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+       fi
+       ;;
+      esac
+
+      if test -n "$objs"; then
+       if test "$deplibs_check_method" != pass_all; then
+         $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+         exit $EXIT_FAILURE
+       else
+         $echo
+         $echo "*** Warning: Linking the shared library $output against the non-libtool"
+         $echo "*** objects $objs is not portable!"
+         libobjs="$libobjs $objs"
+       fi
+      fi
+
+      if test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test "$#" -gt 2; then
+       $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+       if test "$build_libtool_libs" = yes; then
+         # Building a libtool convenience library.
+         # Some compilers have problems with a `.al' extension so
+         # convenience libraries should have the same extension an
+         # archive normally would.
+         oldlibs="$output_objdir/$libname.$libext $oldlibs"
+         build_libtool_libs=convenience
+         build_old_libs=yes
+       fi
+
+       if test -n "$vinfo"; then
+         $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+       fi
+
+       if test -n "$release"; then
+         $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+       fi
+      else
+
+       # Parse the version information argument.
+       save_ifs="$IFS"; IFS=':'
+       set dummy $vinfo 0 0 0
+       IFS="$save_ifs"
+
+       if test -n "$8"; then
+         $echo "$modename: too many parameters to \`-version-info'" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # convert absolute version numbers to libtool ages
+       # this retains compatibility with .la files and attempts
+       # to make the code below a bit more comprehensible
+
+       case $vinfo_number in
+       yes)
+         number_major="$2"
+         number_minor="$3"
+         number_revision="$4"
+         #
+         # There are really only two kinds -- those that
+         # use the current revision as the major version
+         # and those that subtract age and use age as
+         # a minor version.  But, then there is irix
+         # which has an extra 1 added just for fun
+         #
+         case $version_type in
+         darwin|linux|osf|windows)
+           current=`expr $number_major + $number_minor`
+           age="$number_minor"
+           revision="$number_revision"
+           ;;
+         freebsd-aout|freebsd-elf|sunos)
+           current="$number_major"
+           revision="$number_minor"
+           age="0"
+           ;;
+         irix|nonstopux)
+           current=`expr $number_major + $number_minor - 1`
+           age="$number_minor"
+           revision="$number_minor"
+           ;;
+         *)
+           $echo "$modename: unknown library version type \`$version_type'" 1>&2
+           $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+           exit $EXIT_FAILURE
+           ;;
+         esac
+         ;;
+       no)
+         current="$2"
+         revision="$3"
+         age="$4"
+         ;;
+       esac
+
+       # Check that each of the things are valid numbers.
+       case $current in
+       0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+       *)
+         $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       case $revision in
+       0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+       *)
+         $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       case $age in
+       0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+       *)
+         $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       if test "$age" -gt "$current"; then
+         $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+         $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # Calculate the version variables.
+       major=
+       versuffix=
+       verstring=
+       case $version_type in
+       none) ;;
+
+       darwin)
+         # Like Linux, but with the current version available in
+         # verstring for coding it into the library header
+         major=.`expr $current - $age`
+         versuffix="$major.$age.$revision"
+         # Darwin ld doesn't like 0 for these options...
+         minor_current=`expr $current + 1`
+         verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+         ;;
+
+       freebsd-aout)
+         major=".$current"
+         versuffix=".$current.$revision";
+         ;;
+
+       freebsd-elf)
+         major=".$current"
+         versuffix=".$current";
+         ;;
+
+       irix | nonstopux)
+         major=`expr $current - $age + 1`
+
+         case $version_type in
+           nonstopux) verstring_prefix=nonstopux ;;
+           *)         verstring_prefix=sgi ;;
+         esac
+         verstring="$verstring_prefix$major.$revision"
+
+         # Add in all the interfaces that we are compatible with.
+         loop=$revision
+         while test "$loop" -ne 0; do
+           iface=`expr $revision - $loop`
+           loop=`expr $loop - 1`
+           verstring="$verstring_prefix$major.$iface:$verstring"
+         done
+
+         # Before this point, $major must not contain `.'.
+         major=.$major
+         versuffix="$major.$revision"
+         ;;
+
+       linux)
+         major=.`expr $current - $age`
+         versuffix="$major.$age.$revision"
+         ;;
+
+       osf)
+         major=.`expr $current - $age`
+         versuffix=".$current.$age.$revision"
+         verstring="$current.$age.$revision"
+
+         # Add in all the interfaces that we are compatible with.
+         loop=$age
+         while test "$loop" -ne 0; do
+           iface=`expr $current - $loop`
+           loop=`expr $loop - 1`
+           verstring="$verstring:${iface}.0"
+         done
+
+         # Make executables depend on our current version.
+         verstring="$verstring:${current}.0"
+         ;;
+
+       sunos)
+         major=".$current"
+         versuffix=".$current.$revision"
+         ;;
+
+       windows)
+         # Use '-' rather than '.', since we only want one
+         # extension on DOS 8.3 filesystems.
+         major=`expr $current - $age`
+         versuffix="-$major"
+         ;;
+
+       *)
+         $echo "$modename: unknown library version type \`$version_type'" 1>&2
+         $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       # Clear the version info if we defaulted, and they specified a release.
+       if test -z "$vinfo" && test -n "$release"; then
+         major=
+         case $version_type in
+         darwin)
+           # we can't check for "0.0" in archive_cmds due to quoting
+           # problems, so we reset it completely
+           verstring=
+           ;;
+         *)
+           verstring="0.0"
+           ;;
+         esac
+         if test "$need_version" = no; then
+           versuffix=
+         else
+           versuffix=".0.0"
+         fi
+       fi
+
+       # Remove version info from name if versioning should be avoided
+       if test "$avoid_version" = yes && test "$need_version" = no; then
+         major=
+         versuffix=
+         verstring=""
+       fi
+
+       # Check to see if the archive will have undefined symbols.
+       if test "$allow_undefined" = yes; then
+         if test "$allow_undefined_flag" = unsupported; then
+           $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+           build_libtool_libs=no
+           build_old_libs=yes
+         fi
+       else
+         # Don't allow undefined symbols.
+         allow_undefined_flag="$no_undefined_flag"
+       fi
+      fi
+
+      if test "$mode" != relink; then
+       # Remove our outputs, but don't remove object files since they
+       # may have been created when compiling PIC objects.
+       removelist=
+       tempremovelist=`$echo "$output_objdir/*"`
+       for p in $tempremovelist; do
+         case $p in
+           *.$objext)
+              ;;
+           $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+              if test "X$precious_files_regex" != "X"; then
+                if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+                then
+                  continue
+                fi
+              fi
+              removelist="$removelist $p"
+              ;;
+           *) ;;
+         esac
+       done
+       if test -n "$removelist"; then
+         $show "${rm}r $removelist"
+         $run ${rm}r $removelist
+       fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+       oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+       # Transform .lo files to .o files.
+       oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      for path in $notinst_path; do
+       lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+       deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+       dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+      done
+
+      if test -n "$xrpath"; then
+       # If the user specified any rpath flags, then add them.
+       temp_xrpath=
+       for libdir in $xrpath; do
+         temp_xrpath="$temp_xrpath -R$libdir"
+         case "$finalize_rpath " in
+         *" $libdir "*) ;;
+         *) finalize_rpath="$finalize_rpath $libdir" ;;
+         esac
+       done
+       if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+         dependency_libs="$temp_xrpath $dependency_libs"
+       fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+       case " $dlprefiles $dlfiles " in
+       *" $lib "*) ;;
+       *) dlfiles="$dlfiles $lib" ;;
+       esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+       case "$dlprefiles " in
+       *" $lib "*) ;;
+       *) dlprefiles="$dlprefiles $lib" ;;
+       esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+       if test -n "$rpath"; then
+         case $host in
+         *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+           # these systems don't actually have a c library (as such)!
+           ;;
+         *-*-rhapsody* | *-*-darwin1.[012])
+           # Rhapsody C library is in the System framework
+           deplibs="$deplibs -framework System"
+           ;;
+         *-*-netbsd*)
+           # Don't link with libc until the a.out ld.so is fixed.
+           ;;
+         *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+           # Do not include libc due to us having libc/libc_r.
+           test "X$arg" = "X-lc" && continue
+           ;;
+         *)
+           # Add libc to deplibs on all other systems if necessary.
+           if test "$build_libtool_need_lc" = "yes"; then
+             deplibs="$deplibs -lc"
+           fi
+           ;;
+         esac
+       fi
+
+       # Transform deplibs into only deplibs that can be linked in shared.
+       name_save=$name
+       libname_save=$libname
+       release_save=$release
+       versuffix_save=$versuffix
+       major_save=$major
+       # I'm not sure if I'm treating the release correctly.  I think
+       # release should show up in the -l (ie -lgmp5) so we don't want to
+       # add it in twice.  Is that correct?
+       release=""
+       versuffix=""
+       major=""
+       newdeplibs=
+       droppeddeps=no
+       case $deplibs_check_method in
+       pass_all)
+         # Don't check for shared/static.  Everything works.
+         # This might be a little naive.  We might want to check
+         # whether the library exists or not.  But this is on
+         # osf3 & osf4 and I'm not really sure... Just
+         # implementing what was already the behavior.
+         newdeplibs=$deplibs
+         ;;
+       test_compile)
+         # This code stresses the "libraries are programs" paradigm to its
+         # limits. Maybe even breaks it.  We compile a program, linking it
+         # against the deplibs as a proxy for the library.  Then we can check
+         # whether they linked in statically or dynamically with ldd.
+         $rm conftest.c
+         cat > conftest.c <<EOF
+         int main() { return 0; }
+EOF
+         $rm conftest
+         $LTCC -o conftest conftest.c $deplibs
+         if test "$?" -eq 0 ; then
+           ldd_output=`ldd conftest`
+           for i in $deplibs; do
+             name=`expr $i : '-l\(.*\)'`
+             # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" -ne "0"; then
+               if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+                 case " $predeps $postdeps " in
+                 *" $i "*)
+                   newdeplibs="$newdeplibs $i"
+                   i=""
+                   ;;
+                 esac
+               fi
+               if test -n "$i" ; then
+                 libname=`eval \\$echo \"$libname_spec\"`
+                 deplib_matches=`eval \\$echo \"$library_names_spec\"`
+                 set dummy $deplib_matches
+                 deplib_match=$2
+                 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+                   newdeplibs="$newdeplibs $i"
+                 else
+                   droppeddeps=yes
+                   $echo
+                   $echo "*** Warning: dynamic linker does not accept needed library $i."
+                   $echo "*** I have the capability to make that library automatically link in when"
+                   $echo "*** you link to this library.  But I can only do this if you have a"
+                   $echo "*** shared version of the library, which I believe you do not have"
+                   $echo "*** because a test_compile did reveal that the linker did not use it for"
+                   $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+                 fi
+               fi
+             else
+               newdeplibs="$newdeplibs $i"
+             fi
+           done
+         else
+           # Error occurred in the first compile.  Let's try to salvage
+           # the situation: Compile a separate program for each library.
+           for i in $deplibs; do
+             name=`expr $i : '-l\(.*\)'`
+             # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+               $rm conftest
+               $LTCC -o conftest conftest.c $i
+               # Did it work?
+               if test "$?" -eq 0 ; then
+                 ldd_output=`ldd conftest`
+                 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+                   case " $predeps $postdeps " in
+                   *" $i "*)
+                     newdeplibs="$newdeplibs $i"
+                     i=""
+                     ;;
+                   esac
+                 fi
+                 if test -n "$i" ; then
+                   libname=`eval \\$echo \"$libname_spec\"`
+                   deplib_matches=`eval \\$echo \"$library_names_spec\"`
+                   set dummy $deplib_matches
+                   deplib_match=$2
+                   if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+                     newdeplibs="$newdeplibs $i"
+                   else
+                     droppeddeps=yes
+                     $echo
+                     $echo "*** Warning: dynamic linker does not accept needed library $i."
+                     $echo "*** I have the capability to make that library automatically link in when"
+                     $echo "*** you link to this library.  But I can only do this if you have a"
+                     $echo "*** shared version of the library, which you do not appear to have"
+                     $echo "*** because a test_compile did reveal that the linker did not use this one"
+                     $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+                   fi
+                 fi
+               else
+                 droppeddeps=yes
+                 $echo
+                 $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+                 $echo "***  make it link in!  You will probably need to install it or some"
+                 $echo "*** library that it depends on before this library will be fully"
+                 $echo "*** functional.  Installing it before continuing would be even better."
+               fi
+             else
+               newdeplibs="$newdeplibs $i"
+             fi
+           done
+         fi
+         ;;
+       file_magic*)
+         set dummy $deplibs_check_method
+         file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+         for a_deplib in $deplibs; do
+           name=`expr $a_deplib : '-l\(.*\)'`
+           # If $name is empty we are operating on a -L argument.
+            if test "$name" != "" && test  "$name" != "0"; then
+             if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+               case " $predeps $postdeps " in
+               *" $a_deplib "*)
+                 newdeplibs="$newdeplibs $a_deplib"
+                 a_deplib=""
+                 ;;
+               esac
+             fi
+             if test -n "$a_deplib" ; then
+               libname=`eval \\$echo \"$libname_spec\"`
+               for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+                 potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+                 for potent_lib in $potential_libs; do
+                     # Follow soft links.
+                     if ls -lLd "$potent_lib" 2>/dev/null \
+                        | grep " -> " >/dev/null; then
+                       continue
+                     fi
+                     # The statement above tries to avoid entering an
+                     # endless loop below, in case of cyclic links.
+                     # We might still enter an endless loop, since a link
+                     # loop can be closed while we follow links,
+                     # but so what?
+                     potlib="$potent_lib"
+                     while test -h "$potlib" 2>/dev/null; do
+                       potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+                       case $potliblink in
+                       [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+                       *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+                       esac
+                     done
+                     if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+                        | ${SED} 10q \
+                        | $EGREP "$file_magic_regex" > /dev/null; then
+                       newdeplibs="$newdeplibs $a_deplib"
+                       a_deplib=""
+                       break 2
+                     fi
+                 done
+               done
+             fi
+             if test -n "$a_deplib" ; then
+               droppeddeps=yes
+               $echo
+               $echo "*** Warning: linker path does not have real file for library $a_deplib."
+               $echo "*** I have the capability to make that library automatically link in when"
+               $echo "*** you link to this library.  But I can only do this if you have a"
+               $echo "*** shared version of the library, which you do not appear to have"
+               $echo "*** because I did check the linker path looking for a file starting"
+               if test -z "$potlib" ; then
+                 $echo "*** with $libname but no candidates were found. (...for file magic test)"
+               else
+                 $echo "*** with $libname and none of the candidates passed a file format test"
+                 $echo "*** using a file magic. Last file checked: $potlib"
+               fi
+             fi
+           else
+             # Add a -L argument.
+             newdeplibs="$newdeplibs $a_deplib"
+           fi
+         done # Gone through all deplibs.
+         ;;
+       match_pattern*)
+         set dummy $deplibs_check_method
+         match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+         for a_deplib in $deplibs; do
+           name=`expr $a_deplib : '-l\(.*\)'`
+           # If $name is empty we are operating on a -L argument.
+           if test -n "$name" && test "$name" != "0"; then
+             if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+               case " $predeps $postdeps " in
+               *" $a_deplib "*)
+                 newdeplibs="$newdeplibs $a_deplib"
+                 a_deplib=""
+                 ;;
+               esac
+             fi
+             if test -n "$a_deplib" ; then
+               libname=`eval \\$echo \"$libname_spec\"`
+               for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+                 potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+                 for potent_lib in $potential_libs; do
+                   potlib="$potent_lib" # see symlink-check above in file_magic test
+                   if eval $echo \"$potent_lib\" 2>/dev/null \
+                       | ${SED} 10q \
+                       | $EGREP "$match_pattern_regex" > /dev/null; then
+                     newdeplibs="$newdeplibs $a_deplib"
+                     a_deplib=""
+                     break 2
+                   fi
+                 done
+               done
+             fi
+             if test -n "$a_deplib" ; then
+               droppeddeps=yes
+               $echo
+               $echo "*** Warning: linker path does not have real file for library $a_deplib."
+               $echo "*** I have the capability to make that library automatically link in when"
+               $echo "*** you link to this library.  But I can only do this if you have a"
+               $echo "*** shared version of the library, which you do not appear to have"
+               $echo "*** because I did check the linker path looking for a file starting"
+               if test -z "$potlib" ; then
+                 $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+               else
+                 $echo "*** with $libname and none of the candidates passed a file format test"
+                 $echo "*** using a regex pattern. Last file checked: $potlib"
+               fi
+             fi
+           else
+             # Add a -L argument.
+             newdeplibs="$newdeplibs $a_deplib"
+           fi
+         done # Gone through all deplibs.
+         ;;
+       none | unknown | *)
+         newdeplibs=""
+         tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+           -e 's/ -[LR][^ ]*//g'`
+         if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+           for i in $predeps $postdeps ; do
+             # can't use Xsed below, because $i might contain '/'
+             tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+           done
+         fi
+         if $echo "X $tmp_deplibs" | $Xsed -e 's/[     ]//g' \
+           | grep . >/dev/null; then
+           $echo
+           if test "X$deplibs_check_method" = "Xnone"; then
+             $echo "*** Warning: inter-library dependencies are not supported in this platform."
+           else
+             $echo "*** Warning: inter-library dependencies are not known to be supported."
+           fi
+           $echo "*** All declared inter-library dependencies are being dropped."
+           droppeddeps=yes
+         fi
+         ;;
+       esac
+       versuffix=$versuffix_save
+       major=$major_save
+       release=$release_save
+       libname=$libname_save
+       name=$name_save
+
+       case $host in
+       *-*-rhapsody* | *-*-darwin1.[012])
+         # On Rhapsody replace the C library is the System framework
+         newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+         ;;
+       esac
+
+       if test "$droppeddeps" = yes; then
+         if test "$module" = yes; then
+           $echo
+           $echo "*** Warning: libtool could not satisfy all declared inter-library"
+           $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+           $echo "*** a static module, that should work as long as the dlopening"
+           $echo "*** application is linked with the -dlopen flag."
+           if test -z "$global_symbol_pipe"; then
+             $echo
+             $echo "*** However, this would only work if libtool was able to extract symbol"
+             $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+             $echo "*** not find such a program.  So, this module is probably useless."
+             $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+           fi
+           if test "$build_old_libs" = no; then
+             oldlibs="$output_objdir/$libname.$libext"
+             build_libtool_libs=module
+             build_old_libs=yes
+           else
+             build_libtool_libs=no
+           fi
+         else
+           $echo "*** The inter-library dependencies that have been dropped here will be"
+           $echo "*** automatically added whenever a program is linked with this library"
+           $echo "*** or is declared to -dlopen it."
+
+           if test "$allow_undefined" = no; then
+             $echo
+             $echo "*** Since this library must not contain undefined symbols,"
+             $echo "*** because either the platform does not support them or"
+             $echo "*** it was explicitly requested with -no-undefined,"
+             $echo "*** libtool will only create a static version of it."
+             if test "$build_old_libs" = no; then
+               oldlibs="$output_objdir/$libname.$libext"
+               build_libtool_libs=module
+               build_old_libs=yes
+             else
+               build_libtool_libs=no
+             fi
+           fi
+         fi
+       fi
+       # Done checking deplibs!
+       deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+       if test "$hardcode_into_libs" = yes; then
+         # Hardcode the library paths
+         hardcode_libdirs=
+         dep_rpath=
+         rpath="$finalize_rpath"
+         test "$mode" != relink && rpath="$compile_rpath$rpath"
+         for libdir in $rpath; do
+           if test -n "$hardcode_libdir_flag_spec"; then
+             if test -n "$hardcode_libdir_separator"; then
+               if test -z "$hardcode_libdirs"; then
+                 hardcode_libdirs="$libdir"
+               else
+                 # Just accumulate the unique libdirs.
+                 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+                 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+                   ;;
+                 *)
+                   hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+                   ;;
+                 esac
+               fi
+             else
+               eval flag=\"$hardcode_libdir_flag_spec\"
+               dep_rpath="$dep_rpath $flag"
+             fi
+           elif test -n "$runpath_var"; then
+             case "$perm_rpath " in
+             *" $libdir "*) ;;
+             *) perm_rpath="$perm_rpath $libdir" ;;
+             esac
+           fi
+         done
+         # Substitute the hardcoded libdirs into the rpath.
+         if test -n "$hardcode_libdir_separator" &&
+            test -n "$hardcode_libdirs"; then
+           libdir="$hardcode_libdirs"
+           if test -n "$hardcode_libdir_flag_spec_ld"; then
+             eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+           else
+             eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+           fi
+         fi
+         if test -n "$runpath_var" && test -n "$perm_rpath"; then
+           # We should set the runpath_var.
+           rpath=
+           for dir in $perm_rpath; do
+             rpath="$rpath$dir:"
+           done
+           eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+         fi
+         test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+       fi
+
+       shlibpath="$finalize_shlibpath"
+       test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+       if test -n "$shlibpath"; then
+         eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+       fi
+
+       # Get the real and link names of the library.
+       eval shared_ext=\"$shrext_cmds\"
+       eval library_names=\"$library_names_spec\"
+       set dummy $library_names
+       realname="$2"
+       shift; shift
+
+       if test -n "$soname_spec"; then
+         eval soname=\"$soname_spec\"
+       else
+         soname="$realname"
+       fi
+       if test -z "$dlname"; then
+         dlname=$soname
+       fi
+
+       lib="$output_objdir/$realname"
+       for link
+       do
+         linknames="$linknames $link"
+       done
+
+       # Use standard objects if they are pic
+       test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+       # Prepare the list of exported symbols
+       if test -z "$export_symbols"; then
+         if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+           $show "generating symbol list for \`$libname.la'"
+           export_symbols="$output_objdir/$libname.exp"
+           $run $rm $export_symbols
+           cmds=$export_symbols_cmds
+           save_ifs="$IFS"; IFS='~'
+           for cmd in $cmds; do
+             IFS="$save_ifs"
+             eval cmd=\"$cmd\"
+             if len=`expr "X$cmd" : ".*"` &&
+              test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+               $show "$cmd"
+               $run eval "$cmd" || exit $?
+               skipped_export=false
+             else
+               # The command line is too long to execute in one step.
+               $show "using reloadable object file for export list..."
+               skipped_export=:
+               # Break out early, otherwise skipped_export may be
+               # set to false by a later but shorter cmd.
+               break
+             fi
+           done
+           IFS="$save_ifs"
+           if test -n "$export_symbols_regex"; then
+             $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+             $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+             $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+             $run eval '$mv "${export_symbols}T" "$export_symbols"'
+           fi
+         fi
+       fi
+
+       if test -n "$export_symbols" && test -n "$include_expsyms"; then
+         $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+       fi
+
+       tmp_deplibs=
+       for test_deplib in $deplibs; do
+               case " $convenience " in
+               *" $test_deplib "*) ;;
+               *)
+                       tmp_deplibs="$tmp_deplibs $test_deplib"
+                       ;;
+               esac
+       done
+       deplibs="$tmp_deplibs"
+
+       if test -n "$convenience"; then
+         if test -n "$whole_archive_flag_spec"; then
+           save_libobjs=$libobjs
+           eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+         else
+           gentop="$output_objdir/${outputname}x"
+           generated="$generated $gentop"
+
+           func_extract_archives $gentop $convenience
+           libobjs="$libobjs $func_extract_archives_result"
+         fi
+       fi
+       
+       if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+         eval flag=\"$thread_safe_flag_spec\"
+         linker_flags="$linker_flags $flag"
+       fi
+
+       # Make a backup of the uninstalled library when relinking
+       if test "$mode" = relink; then
+         $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+       fi
+
+       # Do each of the archive commands.
+       if test "$module" = yes && test -n "$module_cmds" ; then
+         if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+           eval test_cmds=\"$module_expsym_cmds\"
+           cmds=$module_expsym_cmds
+         else
+           eval test_cmds=\"$module_cmds\"
+           cmds=$module_cmds
+         fi
+       else
+       if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+         eval test_cmds=\"$archive_expsym_cmds\"
+         cmds=$archive_expsym_cmds
+       else
+         eval test_cmds=\"$archive_cmds\"
+         cmds=$archive_cmds
+         fi
+       fi
+
+       if test "X$skipped_export" != "X:" &&
+          len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+          test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+         :
+       else
+         # The command line is too long to link in one step, link piecewise.
+         $echo "creating reloadable object files..."
+
+         # Save the value of $output and $libobjs because we want to
+         # use them later.  If we have whole_archive_flag_spec, we
+         # want to use save_libobjs as it was before
+         # whole_archive_flag_spec was expanded, because we can't
+         # assume the linker understands whole_archive_flag_spec.
+         # This may have to be revisited, in case too many
+         # convenience libraries get linked in and end up exceeding
+         # the spec.
+         if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+           save_libobjs=$libobjs
+         fi
+         save_output=$output
+         output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+         # Clear the reloadable object creation command queue and
+         # initialize k to one.
+         test_cmds=
+         concat_cmds=
+         objlist=
+         delfiles=
+         last_robj=
+         k=1
+         output=$output_objdir/$output_la-${k}.$objext
+         # Loop over the list of objects to be linked.
+         for obj in $save_libobjs
+         do
+           eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+           if test "X$objlist" = X ||
+              { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+                test "$len" -le "$max_cmd_len"; }; then
+             objlist="$objlist $obj"
+           else
+             # The command $test_cmds is almost too long, add a
+             # command to the queue.
+             if test "$k" -eq 1 ; then
+               # The first file doesn't have a previous command to add.
+               eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+             else
+               # All subsequent reloadable object files will link in
+               # the last one created.
+               eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+             fi
+             last_robj=$output_objdir/$output_la-${k}.$objext
+             k=`expr $k + 1`
+             output=$output_objdir/$output_la-${k}.$objext
+             objlist=$obj
+             len=1
+           fi
+         done
+         # Handle the remaining objects by creating one last
+         # reloadable object file.  All subsequent reloadable object
+         # files will link in the last one created.
+         test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+         eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+         if ${skipped_export-false}; then
+           $show "generating symbol list for \`$libname.la'"
+           export_symbols="$output_objdir/$libname.exp"
+           $run $rm $export_symbols
+           libobjs=$output
+           # Append the command to create the export file.
+           eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+         # Set up a command to remove the reloadable object files
+         # after they are used.
+         i=0
+         while test "$i" -lt "$k"
+         do
+           i=`expr $i + 1`
+           delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+         done
+
+         $echo "creating a temporary reloadable object file: $output"
+
+         # Loop through the commands generated above and execute them.
+         save_ifs="$IFS"; IFS='~'
+         for cmd in $concat_cmds; do
+           IFS="$save_ifs"
+           $show "$cmd"
+           $run eval "$cmd" || exit $?
+         done
+         IFS="$save_ifs"
+
+         libobjs=$output
+         # Restore the value of output.
+         output=$save_output
+
+         if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+           eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+         fi
+         # Expand the library linking commands again to reset the
+         # value of $libobjs for piecewise linking.
+
+         # Do each of the archive commands.
+         if test "$module" = yes && test -n "$module_cmds" ; then
+           if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+             cmds=$module_expsym_cmds
+           else
+             cmds=$module_cmds
+           fi
+         else
+         if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+           cmds=$archive_expsym_cmds
+         else
+           cmds=$archive_cmds
+           fi
+         fi
+
+         # Append the command to remove the reloadable object files
+         # to the just-reset $cmds.
+         eval cmds=\"\$cmds~\$rm $delfiles\"
+       fi
+       save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
+         IFS="$save_ifs"
+         eval cmd=\"$cmd\"
+         $show "$cmd"
+         $run eval "$cmd" || {
+           lt_exit=$?
+
+           # Restore the uninstalled library and exit
+           if test "$mode" = relink; then
+             $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+           fi
+
+           exit $lt_exit
+         }
+       done
+       IFS="$save_ifs"
+
+       # Restore the uninstalled library and exit
+       if test "$mode" = relink; then
+         $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+         if test -n "$convenience"; then
+           if test -z "$whole_archive_flag_spec"; then
+             $show "${rm}r $gentop"
+             $run ${rm}r "$gentop"
+           fi
+         fi
+
+         exit $EXIT_SUCCESS
+       fi
+
+       # Create links to the real library.
+       for linkname in $linknames; do
+         if test "$realname" != "$linkname"; then
+           $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+           $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+         fi
+       done
+
+       # If -module or -export-dynamic was specified, set the dlname.
+       if test "$module" = yes || test "$export_dynamic" = yes; then
+         # On all known operating systems, these are identical.
+         dlname="$soname"
+       fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+       $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+       $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+       $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+       if test -n "$objs$old_deplibs"; then
+         $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+         exit $EXIT_FAILURE
+       fi
+       libobj="$output"
+       obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+       ;;
+      *)
+       libobj=
+       obj="$output"
+       ;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl=
+
+      if test -n "$convenience"; then
+       if test -n "$whole_archive_flag_spec"; then
+         eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+       else
+         gentop="$output_objdir/${obj}x"
+         generated="$generated $gentop"
+
+         func_extract_archives $gentop $convenience
+         reload_conv_objs="$reload_objs $func_extract_archives_result"
+       fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      cmds=$reload_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+       IFS="$save_ifs"
+       eval cmd=\"$cmd\"
+       $show "$cmd"
+       $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+       if test -n "$gentop"; then
+         $show "${rm}r $gentop"
+         $run ${rm}r $gentop
+       fi
+
+       exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+       if test -n "$gentop"; then
+         $show "${rm}r $gentop"
+         $run ${rm}r $gentop
+       fi
+
+       # Create an invalid libtool object if no PIC, so that we don't
+       # accidentally link it into a program.
+       # $show "echo timestamp > $libobj"
+       # $run eval "echo timestamp > $libobj" || exit $?
+       exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+       # Only do commands if we really have different PIC objects.
+       reload_objs="$libobjs $reload_conv_objs"
+       output="$libobj"
+       cmds=$reload_cmds
+       save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
+         IFS="$save_ifs"
+         eval cmd=\"$cmd\"
+         $show "$cmd"
+         $run eval "$cmd" || exit $?
+       done
+       IFS="$save_ifs"
+      fi
+
+      if test -n "$gentop"; then
+       $show "${rm}r $gentop"
+       $run ${rm}r $gentop
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+       *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+       if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+          test "$dlopen_self_static" = unknown; then
+         $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+       fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+       # On Rhapsody replace the C library is the System framework
+       compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+       finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+       ;;
+      esac
+
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+       # If the user specified any rpath flags, then add them.
+       for libdir in $rpath $xrpath; do
+         # This is the magic to use -rpath.
+         case "$finalize_rpath " in
+         *" $libdir "*) ;;
+         *) finalize_rpath="$finalize_rpath $libdir" ;;
+         esac
+       done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+       if test -n "$hardcode_libdir_flag_spec"; then
+         if test -n "$hardcode_libdir_separator"; then
+           if test -z "$hardcode_libdirs"; then
+             hardcode_libdirs="$libdir"
+           else
+             # Just accumulate the unique libdirs.
+             case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+             *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+               ;;
+             *)
+               hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+               ;;
+             esac
+           fi
+         else
+           eval flag=\"$hardcode_libdir_flag_spec\"
+           rpath="$rpath $flag"
+         fi
+       elif test -n "$runpath_var"; then
+         case "$perm_rpath " in
+         *" $libdir "*) ;;
+         *) perm_rpath="$perm_rpath $libdir" ;;
+         esac
+       fi
+       case $host in
+       *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+         case :$dllsearchpath: in
+         *":$libdir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$libdir";;
+         esac
+         ;;
+       esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+        test -n "$hardcode_libdirs"; then
+       libdir="$hardcode_libdirs"
+       eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+       if test -n "$hardcode_libdir_flag_spec"; then
+         if test -n "$hardcode_libdir_separator"; then
+           if test -z "$hardcode_libdirs"; then
+             hardcode_libdirs="$libdir"
+           else
+             # Just accumulate the unique libdirs.
+             case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+             *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+               ;;
+             *)
+               hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+               ;;
+             esac
+           fi
+         else
+           eval flag=\"$hardcode_libdir_flag_spec\"
+           rpath="$rpath $flag"
+         fi
+       elif test -n "$runpath_var"; then
+         case "$finalize_perm_rpath " in
+         *" $libdir "*) ;;
+         *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+         esac
+       fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+        test -n "$hardcode_libdirs"; then
+       libdir="$hardcode_libdirs"
+       eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+       # Transform all the library objects into standard objects.
+       compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+       finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       if test -n "$NM" && test -n "$global_symbol_pipe"; then
+         dlsyms="${outputname}S.c"
+       else
+         $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+       fi
+      fi
+
+      if test -n "$dlsyms"; then
+       case $dlsyms in
+       "") ;;
+       *.c)
+         # Discover the nlist of each of the dlfiles.
+         nlist="$output_objdir/${outputname}.nm"
+
+         $show "$rm $nlist ${nlist}S ${nlist}T"
+         $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+         # Parse the name list into a source file.
+         $show "creating $output_objdir/$dlsyms"
+
+         test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+         if test "$dlself" = yes; then
+           $show "generating symbol list for \`$output'"
+
+           test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+           # Add our own program objects to the symbol list.
+           progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+           for arg in $progfiles; do
+             $show "extracting global C symbols from \`$arg'"
+             $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+           done
+
+           if test -n "$exclude_expsyms"; then
+             $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+             $run eval '$mv "$nlist"T "$nlist"'
+           fi
+
+           if test -n "$export_symbols_regex"; then
+             $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+             $run eval '$mv "$nlist"T "$nlist"'
+           fi
+
+           # Prepare the list of exported symbols
+           if test -z "$export_symbols"; then
+             export_symbols="$output_objdir/$outputname.exp"
+             $run $rm $export_symbols
+             $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+           else
+             $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+             $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+             $run eval 'mv "$nlist"T "$nlist"'
+           fi
+         fi
+
+         for arg in $dlprefiles; do
+           $show "extracting global C symbols from \`$arg'"
+           name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+           $run eval '$echo ": $name " >> "$nlist"'
+           $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+         done
+
+         if test -z "$run"; then
+           # Make sure we have at least an empty file.
+           test -f "$nlist" || : > "$nlist"
+
+           if test -n "$exclude_expsyms"; then
+             $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+             $mv "$nlist"T "$nlist"
+           fi
+
+           # Try sorting and uniquifying the output.
+           if grep -v "^: " < "$nlist" |
+               if sort -k 3 </dev/null >/dev/null 2>&1; then
+                 sort -k 3
+               else
+                 sort +2
+               fi |
+               uniq > "$nlist"S; then
+             :
+           else
+             grep -v "^: " < "$nlist" > "$nlist"S
+           fi
+
+           if test -f "$nlist"S; then
+             eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+           else
+             $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+           fi
+
+           $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+"
+
+           case $host in
+           *cygwin* | *mingw* )
+         $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+             ;;
+           * )
+         $echo >> "$output_objdir/$dlsyms" "\
+const struct {
+"
+             ;;
+           esac
+
+
+         $echo >> "$output_objdir/$dlsyms" "\
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+           eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+           $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+         fi
+
+         pic_flag_for_symtable=
+         case $host in
+         # compiling the symbol table file with pic_flag works around
+         # a FreeBSD bug that causes programs to crash when -lm is
+         # linked before any other PIC object.  But we must not use
+         # pic_flag when linking with -static.  The problem exists in
+         # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+         *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+           case "$compile_command " in
+           *" -static "*) ;;
+           *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+           esac;;
+         *-*-hpux*)
+           case "$compile_command " in
+           *" -static "*) ;;
+           *) pic_flag_for_symtable=" $pic_flag";;
+           esac
+         esac
+
+         # Now compile the dynamic symbol file.
+         $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+         $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+         # Clean up the generated files.
+         $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+         $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+         # Transform the symbol file into the correct name.
+         compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+         finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+         ;;
+       *)
+         $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+      else
+       # We keep going just in case the user didn't refer to
+       # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+       # really was required.
+
+       # Nullify the symbol file.
+       compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+       finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+       # Replace the output file specification.
+       compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+       link_command="$compile_command$compile_rpath"
+
+       # We have no uninstalled library dependencies, so finalize right now.
+       $show "$link_command"
+       $run eval "$link_command"
+       status=$?
+
+       # Delete the generated files.
+       if test -n "$dlsyms"; then
+         $show "$rm $output_objdir/${outputname}S.${objext}"
+         $run $rm "$output_objdir/${outputname}S.${objext}"
+       fi
+
+       exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+       # We should set the shlibpath_var
+       rpath=
+       for dir in $temp_rpath; do
+         case $dir in
+         [\\/]* | [A-Za-z]:[\\/]*)
+           # Absolute path.
+           rpath="$rpath$dir:"
+           ;;
+         *)
+           # Relative path: add a thisdir entry.
+           rpath="$rpath\$thisdir/$dir:"
+           ;;
+         esac
+       done
+       temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+       compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+       finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+       if test -n "$perm_rpath"; then
+         # We should set the runpath_var.
+         rpath=
+         for dir in $perm_rpath; do
+           rpath="$rpath$dir:"
+         done
+         compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+       fi
+       if test -n "$finalize_perm_rpath"; then
+         # We should set the runpath_var.
+         rpath=
+         for dir in $finalize_perm_rpath; do
+           rpath="$rpath$dir:"
+         done
+         finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+       fi
+      fi
+
+      if test "$no_install" = yes; then
+       # We don't need to create a wrapper script.
+       link_command="$compile_var$compile_command$compile_rpath"
+       # Replace the output file specification.
+       link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+       # Delete the old output file.
+       $run $rm $output
+       # Link the executable and exit
+       $show "$link_command"
+       $run eval "$link_command" || exit $?
+       exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+       # Fast installation is not supported
+       link_command="$compile_var$compile_command$compile_rpath"
+       relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+       $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+       $echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+       if test "$fast_install" != no; then
+         link_command="$finalize_var$compile_command$finalize_rpath"
+         if test "$fast_install" = yes; then
+           relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+         else
+           # fast_install is set to needless
+           relink_command=
+         fi
+       else
+         link_command="$compile_var$compile_command$compile_rpath"
+         relink_command="$finalize_var$finalize_command$finalize_rpath"
+       fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+       # Preserve any variables that may affect compiler behavior
+       for var in $variables_saved_for_relink; do
+         if eval test -z \"\${$var+set}\"; then
+           relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+         elif eval var_value=\$$var; test -z "$var_value"; then
+           relink_command="$var=; export $var; $relink_command"
+         else
+           var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+           relink_command="$var=\"$var_value\"; export $var; $relink_command"
+         fi
+       done
+       relink_command="(cd `pwd`; $relink_command)"
+       relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+       case $progpath in
+       [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+       *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+       esac
+       qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+       qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+       # win32 will think the script is a binary if it has
+       # a .exe suffix, so we strip it off here.
+       case $output in
+         *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+       esac
+       # test for cygwin because mv fails w/o .exe extensions
+       case $host in
+         *cygwin*)
+           exeext=.exe
+           outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+         *) exeext= ;;
+       esac
+       case $host in
+         *cygwin* | *mingw* )
+           cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
+           cwrapper=`$echo ${output}.exe`
+           $rm $cwrappersource $cwrapper
+           trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+           cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+           cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+#define DIR_SEPARATOR '/'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+#define HAVE_DOS_BASED_FILE_SYSTEM
+#ifndef DIR_SEPARATOR_2
+#define DIR_SEPARATOR_2 '\\'
+#endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+char * basename (const char *name);
+char * fnqualify(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup ((char *) basename (argv[0]));
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+           cat >> $cwrappersource <<EOF
+  newargz[0] = "$SHELL";
+EOF
+
+           cat >> $cwrappersource <<"EOF"
+  newargz[1] = fnqualify(argv[0]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+EOF
+
+           cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+
+           cat >> $cwrappersource <<"EOF"
+  return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+char *
+basename (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha (name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return (char *) base;
+}
+
+char *
+fnqualify(const char *path)
+{
+  size_t size;
+  char *p;
+  char tmp[LT_PATHMAX + 1];
+
+  assert(path != NULL);
+
+  /* Is it qualified already? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha (path[0]) && path[1] == ':')
+    return xstrdup (path);
+#endif
+  if (IS_DIR_SEPARATOR (path[0]))
+    return xstrdup (path);
+
+  /* prepend the current directory */
+  /* doesn't handle '~' */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
+  p = XMALLOC(char, size);
+  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
+  return p;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+         # we should really use a build-platform specific compiler
+         # here, but OTOH, the wrappers (shell script and this C one)
+         # are only useful if you want to execute the "real" binary.
+         # Since the "real" binary is built for $host, then this
+         # wrapper might as well be built for $host, too.
+         $run $LTCC -s -o $cwrapper $cwrappersource
+         ;;
+       esac
+       $rm $output
+       trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+       $echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+       $echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+       if test "$fast_install" = yes; then
+         $echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+         $echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+       $echo \"\$relink_command_output\" >&2
+       $rm \"\$progdir/\$file\"
+       exit $EXIT_FAILURE
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+       else
+         $echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+       fi
+
+       $echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+       # Export our shlibpath_var if we have one.
+       if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+         $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+       fi
+
+       # fixup the dll searchpath if we need to.
+       if test -n "$dllsearchpath"; then
+         $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+       fi
+
+       $echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+       case $host in
+       # Backslashes separate directories on plain windows
+       *-*-mingw | *-*-os2*)
+         $echo >> $output "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+         ;;
+
+       *)
+         $echo >> $output "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+         ;;
+       esac
+       $echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit $EXIT_FAILURE
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi\
+"
+       chmod +x $output
+      fi
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+       oldobjs="$libobjs_save"
+       addlibs="$convenience"
+       build_libtool_libs=no
+      else
+       if test "$build_libtool_libs" = module; then
+         oldobjs="$libobjs_save"
+         build_libtool_libs=no
+       else
+         oldobjs="$old_deplibs $non_pic_objects"
+       fi
+       addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+       gentop="$output_objdir/${outputname}x"
+       generated="$generated $gentop"
+
+       func_extract_archives $gentop $addlibs
+       oldobjs="$oldobjs $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+       cmds=$old_archive_from_new_cmds
+      else
+       # POSIX demands no paths to be encoded in archives.  We have
+       # to avoid creating archives with duplicate basenames if we
+       # might have to extract them afterwards, e.g., when creating a
+       # static archive out of a convenience library, or when linking
+       # the entirety of a libtool archive into another (currently
+       # not supported by libtool).
+       if (for obj in $oldobjs
+           do
+             $echo "X$obj" | $Xsed -e 's%^.*/%%'
+           done | sort | sort -uc >/dev/null 2>&1); then
+         :
+       else
+         $echo "copying selected object files to avoid basename conflicts..."
+
+         if test -z "$gentop"; then
+           gentop="$output_objdir/${outputname}x"
+           generated="$generated $gentop"
+
+           $show "${rm}r $gentop"
+           $run ${rm}r "$gentop"
+           $show "$mkdir $gentop"
+           $run $mkdir "$gentop"
+           status=$?
+           if test "$status" -ne 0 && test ! -d "$gentop"; then
+             exit $status
+           fi
+         fi
+
+         save_oldobjs=$oldobjs
+         oldobjs=
+         counter=1
+         for obj in $save_oldobjs
+         do
+           objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+           case " $oldobjs " in
+           " ") oldobjs=$obj ;;
+           *[\ /]"$objbase "*)
+             while :; do
+               # Make sure we don't pick an alternate name that also
+               # overlaps.
+               newobj=lt$counter-$objbase
+               counter=`expr $counter + 1`
+               case " $oldobjs " in
+               *[\ /]"$newobj "*) ;;
+               *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+               esac
+             done
+             $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+             $run ln "$obj" "$gentop/$newobj" ||
+             $run cp "$obj" "$gentop/$newobj"
+             oldobjs="$oldobjs $gentop/$newobj"
+             ;;
+           *) oldobjs="$oldobjs $obj" ;;
+           esac
+         done
+       fi
+
+       eval cmds=\"$old_archive_cmds\"
+
+       if len=`expr "X$cmds" : ".*"` &&
+            test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+         cmds=$old_archive_cmds
+       else
+         # the command line is too long to link in one step, link in parts
+         $echo "using piecewise archive linking..."
+         save_RANLIB=$RANLIB
+         RANLIB=:
+         objlist=
+         concat_cmds=
+         save_oldobjs=$oldobjs
+
+         # Is there a better way of finding the last object in the list?
+         for obj in $save_oldobjs
+         do
+           last_oldobj=$obj
+         done
+         for obj in $save_oldobjs
+         do
+           oldobjs="$objlist $obj"
+           objlist="$objlist $obj"
+           eval test_cmds=\"$old_archive_cmds\"
+           if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+              test "$len" -le "$max_cmd_len"; then
+             :
+           else
+             # the above command should be used before it gets too long
+             oldobjs=$objlist
+             if test "$obj" = "$last_oldobj" ; then
+               RANLIB=$save_RANLIB
+             fi
+             test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+             eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+             objlist=
+           fi
+         done
+         RANLIB=$save_RANLIB
+         oldobjs=$objlist
+         if test "X$oldobjs" = "X" ; then
+           eval cmds=\"\$concat_cmds\"
+         else
+           eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+         fi
+       fi
+      fi
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+        eval cmd=\"$cmd\"
+       IFS="$save_ifs"
+       $show "$cmd"
+       $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+       if eval test -z \"\${$var+set}\"; then
+         relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+       elif eval var_value=\$$var; test -z "$var_value"; then
+         relink_command="$var=; export $var; $relink_command"
+       else
+         var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+         relink_command="$var=\"$var_value\"; export $var; $relink_command"
+       fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+       relink_command=
+      fi
+
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+       for installed in no yes; do
+         if test "$installed" = yes; then
+           if test -z "$install_libdir"; then
+             break
+           fi
+           output="$output_objdir/$outputname"i
+           # Replace all uninstalled libtool libraries with the installed ones
+           newdependency_libs=
+           for deplib in $dependency_libs; do
+             case $deplib in
+             *.la)
+               name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+               eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+               if test -z "$libdir"; then
+                 $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+                 exit $EXIT_FAILURE
+               fi
+               newdependency_libs="$newdependency_libs $libdir/$name"
+               ;;
+             *) newdependency_libs="$newdependency_libs $deplib" ;;
+             esac
+           done
+           dependency_libs="$newdependency_libs"
+           newdlfiles=
+           for lib in $dlfiles; do
+             name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+             eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+             if test -z "$libdir"; then
+               $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+               exit $EXIT_FAILURE
+             fi
+             newdlfiles="$newdlfiles $libdir/$name"
+           done
+           dlfiles="$newdlfiles"
+           newdlprefiles=
+           for lib in $dlprefiles; do
+             name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+             eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+             if test -z "$libdir"; then
+               $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+               exit $EXIT_FAILURE
+             fi
+             newdlprefiles="$newdlprefiles $libdir/$name"
+           done
+           dlprefiles="$newdlprefiles"
+         else
+           newdlfiles=
+           for lib in $dlfiles; do
+             case $lib in
+               [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+               *) abs=`pwd`"/$lib" ;;
+             esac
+             newdlfiles="$newdlfiles $abs"
+           done
+           dlfiles="$newdlfiles"
+           newdlprefiles=
+           for lib in $dlprefiles; do
+             case $lib in
+               [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+               *) abs=`pwd`"/$lib" ;;
+             esac
+             newdlprefiles="$newdlprefiles $abs"
+           done
+           dlprefiles="$newdlprefiles"
+         fi
+         $rm $output
+         # place dlname in correct position for cygwin
+         tdlname=$dlname
+         case $host,$output,$installed,$module,$dlname in
+           *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+         esac
+         $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+         if test "$installed" = no && test "$need_relink" = yes; then
+           $echo >> $output "\
+relink_command=\"$relink_command\""
+         fi
+       done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       arg="\"$arg\""
+       ;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \      ]*|*]*|"")
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+       files="$files $dest"
+       dest=$arg
+       continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) 
+       case " $install_prog " in
+       *[\\\ /]cp\ *) ;;
+       *) prev=$arg ;;
+       esac
+       ;;
+      -g | -m | -o) prev=$arg ;;
+      -s)
+       stripme=" -s"
+       continue
+       ;;
+      -*)
+       ;;
+      *)
+       # If the previous option needed an argument, then skip it.
+       if test -n "$prev"; then
+         prev=
+       else
+         dest=$arg
+         continue
+       fi
+       ;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*|"")
+       arg="\"$arg\""
+       ;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+       $echo "$modename: no file or destination specified" 1>&2
+      else
+       $echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test "$#" -gt 2; then
+       $echo "$modename: \`$dest' is not a directory" 1>&2
+       $echo "$help" 1>&2
+       exit $EXIT_FAILURE
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+       case $file in
+       *.lo) ;;
+       *)
+         $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+       # Do the static libraries later.
+       staticlibs="$staticlibs $file"
+       ;;
+
+      *.la)
+       # Check to see that this really is a libtool archive.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       library_names=
+       old_library=
+       relink_command=
+       # If there is no directory component, then add one.
+       case $file in
+       */* | *\\*) . $file ;;
+       *) . ./$file ;;
+       esac
+
+       # Add the libdir to current_libdirs if it is the destination.
+       if test "X$destdir" = "X$libdir"; then
+         case "$current_libdirs " in
+         *" $libdir "*) ;;
+         *) current_libdirs="$current_libdirs $libdir" ;;
+         esac
+       else
+         # Note the libdir as a future libdir.
+         case "$future_libdirs " in
+         *" $libdir "*) ;;
+         *) future_libdirs="$future_libdirs $libdir" ;;
+         esac
+       fi
+
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+       test "X$dir" = "X$file/" && dir=
+       dir="$dir$objdir"
+
+       if test -n "$relink_command"; then
+         # Determine the prefix the user has applied to our future dir.
+         inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+         # Don't allow the user to place us outside of our expected
+         # location b/c this prevents finding dependent libraries that
+         # are installed to the same prefix.
+         # At present, this check doesn't affect windows .dll's that
+         # are installed into $libdir/../bin (currently, that works fine)
+         # but it's something to keep an eye on.
+         if test "$inst_prefix_dir" = "$destdir"; then
+           $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+           exit $EXIT_FAILURE
+         fi
+
+         if test -n "$inst_prefix_dir"; then
+           # Stick the inst_prefix_dir data into the link command.
+           relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+         else
+           relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+         fi
+
+         $echo "$modename: warning: relinking \`$file'" 1>&2
+         $show "$relink_command"
+         if $run eval "$relink_command"; then :
+         else
+           $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+           exit $EXIT_FAILURE
+         fi
+       fi
+
+       # See the names of the shared library.
+       set dummy $library_names
+       if test -n "$2"; then
+         realname="$2"
+         shift
+         shift
+
+         srcname="$realname"
+         test -n "$relink_command" && srcname="$realname"T
+
+         # Install the shared library and build the symlinks.
+         $show "$install_prog $dir/$srcname $destdir/$realname"
+         $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+         if test -n "$stripme" && test -n "$striplib"; then
+           $show "$striplib $destdir/$realname"
+           $run eval "$striplib $destdir/$realname" || exit $?
+         fi
+
+         if test "$#" -gt 0; then
+           # Delete the old symlinks, and create new ones.
+           # Try `ln -sf' first, because the `ln' binary might depend on
+           # the symlink we replace!  Solaris /bin/ln does not understand -f,
+           # so we also need to try rm && ln -s.
+           for linkname
+           do
+             if test "$linkname" != "$realname"; then
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+             fi
+           done
+         fi
+
+         # Do each command in the postinstall commands.
+         lib="$destdir/$realname"
+         cmds=$postinstall_cmds
+         save_ifs="$IFS"; IFS='~'
+         for cmd in $cmds; do
+           IFS="$save_ifs"
+           eval cmd=\"$cmd\"
+           $show "$cmd"
+           $run eval "$cmd" || {
+             lt_exit=$?
+
+             # Restore the uninstalled library and exit
+             if test "$mode" = relink; then
+               $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+             fi
+
+             exit $lt_exit
+           }
+         done
+         IFS="$save_ifs"
+       fi
+
+       # Install the pseudo-library for information purposes.
+       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+       instname="$dir/$name"i
+       $show "$install_prog $instname $destdir/$name"
+       $run eval "$install_prog $instname $destdir/$name" || exit $?
+
+       # Maybe install the static library, too.
+       test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+       ;;
+
+      *.lo)
+       # Install (i.e. copy) a libtool object.
+
+       # Figure out destination file name, if it wasn't already specified.
+       if test -n "$destname"; then
+         destfile="$destdir/$destname"
+       else
+         destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+         destfile="$destdir/$destfile"
+       fi
+
+       # Deduce the name of the destination old-style object file.
+       case $destfile in
+       *.lo)
+         staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+         ;;
+       *.$objext)
+         staticdest="$destfile"
+         destfile=
+         ;;
+       *)
+         $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+         ;;
+       esac
+
+       # Install the libtool object if requested.
+       if test -n "$destfile"; then
+         $show "$install_prog $file $destfile"
+         $run eval "$install_prog $file $destfile" || exit $?
+       fi
+
+       # Install the old object if enabled.
+       if test "$build_old_libs" = yes; then
+         # Deduce the name of the old-style object file.
+         staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+         $show "$install_prog $staticobj $staticdest"
+         $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+       fi
+       exit $EXIT_SUCCESS
+       ;;
+
+      *)
+       # Figure out destination file name, if it wasn't already specified.
+       if test -n "$destname"; then
+         destfile="$destdir/$destname"
+       else
+         destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+         destfile="$destdir/$destfile"
+       fi
+
+       # If the file is missing, and there is a .exe on the end, strip it
+       # because it is most likely a libtool script we actually want to
+       # install
+       stripped_ext=""
+       case $file in
+         *.exe)
+           if test ! -f "$file"; then
+             file=`$echo $file|${SED} 's,.exe$,,'`
+             stripped_ext=".exe"
+           fi
+           ;;
+       esac
+
+       # Do a test to see if this is really a libtool program.
+       case $host in
+       *cygwin*|*mingw*)
+           wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+           ;;
+       *)
+           wrapper=$file
+           ;;
+       esac
+       if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+         notinst_deplibs=
+         relink_command=
+
+         # Note that it is not necessary on cygwin/mingw to append a dot to
+         # foo even if both foo and FILE.exe exist: automatic-append-.exe
+         # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+         # `FILE.' does not work on cygwin managed mounts.
+         #
+         # If there is no directory component, then add one.
+         case $wrapper in
+         */* | *\\*) . ${wrapper} ;;
+         *) . ./${wrapper} ;;
+         esac
+
+         # Check the variables that should have been set.
+         if test -z "$notinst_deplibs"; then
+           $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+           exit $EXIT_FAILURE
+         fi
+
+         finalize=yes
+         for lib in $notinst_deplibs; do
+           # Check to see that each library is installed.
+           libdir=
+           if test -f "$lib"; then
+             # If there is no directory component, then add one.
+             case $lib in
+             */* | *\\*) . $lib ;;
+             *) . ./$lib ;;
+             esac
+           fi
+           libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+           if test -n "$libdir" && test ! -f "$libfile"; then
+             $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+             finalize=no
+           fi
+         done
+
+         relink_command=
+         # Note that it is not necessary on cygwin/mingw to append a dot to
+         # foo even if both foo and FILE.exe exist: automatic-append-.exe
+         # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+         # `FILE.' does not work on cygwin managed mounts.
+         #
+         # If there is no directory component, then add one.
+         case $wrapper in
+         */* | *\\*) . ${wrapper} ;;
+         *) . ./${wrapper} ;;
+         esac
+
+         outputname=
+         if test "$fast_install" = no && test -n "$relink_command"; then
+           if test "$finalize" = yes && test -z "$run"; then
+             tmpdir="/tmp"
+             test -n "$TMPDIR" && tmpdir="$TMPDIR"
+             tmpdir="$tmpdir/libtool-$$"
+             save_umask=`umask`
+             umask 0077
+             if $mkdir "$tmpdir"; then
+               umask $save_umask
+             else
+               umask $save_umask
+               $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+               continue
+             fi
+             file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+             outputname="$tmpdir/$file"
+             # Replace the output file specification.
+             relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+             $show "$relink_command"
+             if $run eval "$relink_command"; then :
+             else
+               $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+               ${rm}r "$tmpdir"
+               continue
+             fi
+             file="$outputname"
+           else
+             $echo "$modename: warning: cannot relink \`$file'" 1>&2
+           fi
+         else
+           # Install the binary that we compiled earlier.
+           file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+         fi
+       fi
+
+       # remove .exe since cygwin /usr/bin/install will append another
+       # one anyway 
+       case $install_prog,$host in
+       */usr/bin/install*,*cygwin*)
+         case $file:$destfile in
+         *.exe:*.exe)
+           # this is ok
+           ;;
+         *.exe:*)
+           destfile=$destfile.exe
+           ;;
+         *:*.exe)
+           destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+           ;;
+         esac
+         ;;
+       esac
+       $show "$install_prog$stripme $file $destfile"
+       $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+       test -n "$outputname" && ${rm}r "$tmpdir"
+       ;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+       $show "$old_striplib $oldlib"
+       $run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      cmds=$old_postinstall_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+       IFS="$save_ifs"
+       eval cmd=\"$cmd\"
+       $show "$cmd"
+       $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+       libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+       if test -n "$finish_cmds"; then
+         # Do each command in the finish commands.
+         cmds=$finish_cmds
+         save_ifs="$IFS"; IFS='~'
+         for cmd in $cmds; do
+           IFS="$save_ifs"
+           eval cmd=\"$cmd\"
+           $show "$cmd"
+           $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+         done
+         IFS="$save_ifs"
+       fi
+       if test -n "$finish_eval"; then
+         # Do the single finish_eval.
+         eval cmds=\"$finish_eval\"
+         $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+       fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit $EXIT_SUCCESS
+
+    $echo "----------------------------------------------------------------------"
+    $echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $echo "   $libdir"
+    done
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      $echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "----------------------------------------------------------------------"
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit $EXIT_FAILURE
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+       $echo "$modename: \`$file' is not a file" 1>&2
+       $echo "$help" 1>&2
+       exit $EXIT_FAILURE
+      fi
+
+      dir=
+      case $file in
+      *.la)
+       # Check to see that this really is a libtool archive.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+         $echo "$help" 1>&2
+         exit $EXIT_FAILURE
+       fi
+
+       # Read the libtool library.
+       dlname=
+       library_names=
+
+       # If there is no directory component, then add one.
+       case $file in
+       */* | *\\*) . $file ;;
+       *) . ./$file ;;
+       esac
+
+       # Skip this library if it cannot be dlopened.
+       if test -z "$dlname"; then
+         # Warn if it was a shared library.
+         test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+         continue
+       fi
+
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+       test "X$dir" = "X$file" && dir=.
+
+       if test -f "$dir/$objdir/$dlname"; then
+         dir="$dir/$objdir"
+       else
+         $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+         exit $EXIT_FAILURE
+       fi
+       ;;
+
+      *.lo)
+       # Just add the directory containing the .lo file.
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+       test "X$dir" = "X$file" && dir=.
+       ;;
+
+      *)
+       $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+       continue
+       ;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+       eval "$shlibpath_var=\"\$dir\""
+      else
+       eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+       # Do a test to see if this is really a libtool program.
+       if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+         # If there is no directory component, then add one.
+         case $file in
+         */* | *\\*) . $file ;;
+         *) . ./$file ;;
+         esac
+
+         # Transform arg to wrapped name.
+         file="$progdir/$program"
+       fi
+       ;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+       # Export the shlibpath_var.
+       eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      if test "${save_LC_ALL+set}" = set; then
+       LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+       LANG="$save_LANG"; export LANG
+      fi
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+       eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+       $echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    rmdirs=
+
+    origobjdir="$objdir"
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+       dir=.
+       objdir="$origobjdir"
+      else
+       objdir="$dir/$origobjdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test "$mode" = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
+       case " $rmdirs " in
+         *" $objdir "*) ;;
+         *) rmdirs="$rmdirs $objdir" ;;
+       esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+       || (test -h "$file") >/dev/null 2>&1 \
+       || test -f "$file"; then
+       :
+      elif test -d "$file"; then
+       exit_status=1
+       continue
+      elif test "$rmforce" = yes; then
+       continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+       # Possibly a libtool archive, so verify it.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+         . $dir/$name
+
+         # Delete the libtool libraries and symlinks.
+         for n in $library_names; do
+           rmfiles="$rmfiles $objdir/$n"
+         done
+         test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+         test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+         if test "$mode" = uninstall; then
+           if test -n "$library_names"; then
+             # Do each command in the postuninstall commands.
+             cmds=$postuninstall_cmds
+             save_ifs="$IFS"; IFS='~'
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd"
+               if test "$?" -ne 0 && test "$rmforce" != yes; then
+                 exit_status=1
+               fi
+             done
+             IFS="$save_ifs"
+           fi
+
+           if test -n "$old_library"; then
+             # Do each command in the old_postuninstall commands.
+             cmds=$old_postuninstall_cmds
+             save_ifs="$IFS"; IFS='~'
+             for cmd in $cmds; do
+               IFS="$save_ifs"
+               eval cmd=\"$cmd\"
+               $show "$cmd"
+               $run eval "$cmd"
+               if test "$?" -ne 0 && test "$rmforce" != yes; then
+                 exit_status=1
+               fi
+             done
+             IFS="$save_ifs"
+           fi
+           # FIXME: should reinstall the best remaining shared library.
+         fi
+       fi
+       ;;
+
+      *.lo)
+       # Possibly a libtool object, so verify it.
+       if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+         # Read the .lo file
+         . $dir/$name
+
+         # Add PIC object to the list of files to remove.
+         if test -n "$pic_object" \
+            && test "$pic_object" != none; then
+           rmfiles="$rmfiles $dir/$pic_object"
+         fi
+
+         # Add non-PIC object to the list of files to remove.
+         if test -n "$non_pic_object" \
+            && test "$non_pic_object" != none; then
+           rmfiles="$rmfiles $dir/$non_pic_object"
+         fi
+       fi
+       ;;
+
+      *)
+       if test "$mode" = clean ; then
+         noexename=$name
+         case $file in
+         *.exe)
+           file=`$echo $file|${SED} 's,.exe$,,'`
+           noexename=`$echo $name|${SED} 's,.exe$,,'`
+           # $file with .exe has already been added to rmfiles,
+           # add $file without .exe
+           rmfiles="$rmfiles $file"
+           ;;
+         esac
+         # Do a test to see if this is a libtool program.
+         if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+           relink_command=
+           . $dir/$noexename
+
+           # note $name still contains .exe if it was in $file originally
+           # as does the version of $file that was added into $rmfiles
+           rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+           if test "$fast_install" = yes && test -n "$relink_command"; then
+             rmfiles="$rmfiles $objdir/lt-$name"
+           fi
+           if test "X$noexename" != "X$name" ; then
+             rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+           fi
+         fi
+       fi
+       ;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+    objdir="$origobjdir"
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+       $show "rmdir $dir"
+       $run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+  esac
+
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit $EXIT_FAILURE
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+  exit $EXIT_SUCCESS
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                   try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                   try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                   specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+  ;;
+esac
+
+$echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/missing b/missing
new file mode 100755 (executable)
index 0000000..894e786
--- /dev/null
+++ b/missing
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+                                      sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+          sed 's/\.am$/.in/' |
+          while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+       touch $file
+    else
+       test -z "$file" || exec >$file
+       echo "#! /bin/sh"
+       echo "# Created by GNU Automake missing as a replacement of"
+       echo "#  $ $@"
+       echo "exit 0"
+       chmod +x $file
+       exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+       case "$LASTARG" in
+       *.y)
+           SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+           if [ -f "$SRCFILE" ]; then
+                cp "$SRCFILE" y.tab.c
+           fi
+           SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+           if [ -f "$SRCFILE" ]; then
+                cp "$SRCFILE" y.tab.h
+           fi
+         ;;
+       esac
+    fi
+    if [ ! -f y.tab.h ]; then
+       echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+       echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+       case "$LASTARG" in
+       *.l)
+           SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+           if [ -f "$SRCFILE" ]; then
+                cp "$SRCFILE" lex.yy.c
+           fi
+         ;;
+       esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+       echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+        you modified a dependency of a manual page.  You may need the
+        \`Help2man' package in order for those modifications to take
+        effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+       file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+       touch $file
+    else
+       test -z "$file" || exec >$file
+       echo ".ab help2man is required to generate this page"
+       exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+       case "$firstarg" in
+       *o*)
+           firstarg=`echo "$firstarg" | sed s/o//`
+           tar "$firstarg" "$@" && exit 0
+           ;;
+       esac
+       case "$firstarg" in
+       *h*)
+           firstarg=`echo "$firstarg" | sed s/h//`
+           tar "$firstarg" "$@" && exit 0
+           ;;
+       esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End: