+-- Title: ATMEL Private MIB
+
+ATMEL-MIB DEFINITIONS ::= BEGIN
+
+--IMPORTS
+-- enterprises,Counter
+--FROM RFC1155-SMI
+-- DisplayString
+--FROM RFC1213-MIB;
+-- TRAP-TYPE
+--FROM RFC-1215;
+
+
+--MacAddress ::= IMPLICIT OCTET STRING (SIZE(6))
+DisplayString ::= OCTET STRING
+
+internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 }
+directory OBJECT IDENTIFIER ::= { internet 1 }
+mgmt OBJECT IDENTIFIER ::= { internet 2 }
+experimental OBJECT IDENTIFIER ::= { internet 3 }
+private OBJECT IDENTIFIER ::= { internet 4 }
+enterprises OBJECT IDENTIFIER ::= { private 1 }
+
+atmel OBJECT IDENTIFIER ::= { enterprises 410 }
+atmelmib OBJECT IDENTIFIER ::= { atmel 1}
+atmelSys OBJECT IDENTIFIER ::= {atmelmib 1}
+wireless OBJECT IDENTIFIER ::= {atmelmib 2}
+traps OBJECT IDENTIFIER ::= {atmelmib 3 }
+
+
+
+--*************************** System***************************
+--****************************************************************
+
+
+
+sysCtrlGRP OBJECT IDENTIFIER ::= {atmelSys 1}
+
+sysDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "A textual description of the entity. This value
+ should include the full name and version
+ identification of the system's hardware type,
+ software operating-system, and networking
+ software. It is mandatory that this only contain
+ printable ASCII characters."
+ ::= { sysCtrlGRP 1 }
+
+
+sysReset OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "By setting this attribute enable(1), a reset command to
+ the system is issued."
+ ::= { sysCtrlGRP 2 }
+
+sysTrapSwitch OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute enables the transmission of SNMP.V1 TRAPs."
+ ::= {sysCtrlGRP 3}
+
+sysLoadDefaults OBJECT-TYPE
+ SYNTAX INTEGER { enable(1), disable(2) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Setting this attribute to enable(1), will cause the system to load
+ the factory default values of all the operational parameters."
+ ::= { sysCtrlGRP 4 }
+
+sysDeviceInfo OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (92))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Hardware device configuration struct."
+ ::= {sysCtrlGRP 5 }
+
+sysUpload OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "By setting this attribute enable(1), a Upload configuration command to
+ the system is issued."
+ ::= { sysCtrlGRP 6 }
+
+
+
+
+operBridgingLevel OBJECT IDENTIFIER ::= {atmelSys 2}
+
+operIPAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IP address of this device used over its Ethernet
+ or Wireless LAN port."
+ ::= { operBridgingLevel 1 }
+
+operIPMask OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The IP Network mask used by the IP entity when accessing
+ devices through any of its LAN Ports (Ethernet or WLAN)."
+ ::= { operBridgingLevel 2}
+
+operEthernetAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC Address of the Ethernet interface."
+ ::= { operBridgingLevel 3}
+
+
+operGateway OBJECT-TYPE
+ SYNTAX IpAddress
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= { operBridgingLevel 4 }
+
+operDHCP OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When setting this attribute to ENABLE, the system will
+ enable DHCP protocol."
+ ::= { operBridgingLevel 5 }
+
+operPrimaryPort OBJECT-TYPE
+ SYNTAX INTEGER {Ethernet(1),Wireless(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute indicates the primaty port."
+ ::= { operBridgingLevel 6 }
+
+
+
+
+
+
+operFiltering OBJECT IDENTIFIER ::= {atmelSys 3}
+
+operIPFilter OBJECT-TYPE
+ SYNTAX INTEGER {enable(1), disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "When setting this attribute to ENABLE, the system will
+ filter out all non IP-traffic."
+ ::= { operFiltering 1 }
+
+
+
+
+
+operBridgeOperationalMode OBJECT IDENTIFIER ::= {atmelSys 4}
+
+
+bridgeOperationalMode OBJECT-TYPE
+ SYNTAX INTEGER {WBPoint2Multipoint(1), AP(2), APclient(3), WBPoint2Point(3)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Operational Mode of Bridge. Access Point, Access Point client, Wireless Bridge Point to Point, Wireless Bridge Point to MultiPoint."
+ ::= { operBridgeOperationalMode 1 }
+
+bridgeRemoteBridgeBSSID OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Preferred BSSID if the device is at Access Point client mode
+ or the remote Mac if the device is at Wireless Bridge Point to Point mode."
+ ::= { operBridgeOperationalMode 2 }
+
+
+
+
+
+dot1dStatic OBJECT IDENTIFIER ::= {atmelSys 5}
+
+
+StaticMacFilterNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter's value indicates the number of the currently
+ static MAC filters."
+ ::= { dot1dStatic 1 }
+
+
+ dot1dStaticTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Dot1dStaticEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing filtering information
+ configured into the bridge by (local or network)
+ management specifying the set of ports to which
+ frames received from specific ports and containing
+ specific destination addresses are allowed to be
+ forwarded. The value of zero in this table as the
+ port number from which frames with a specific
+ destination address are received, is used to
+ specify all ports for which there is no specific
+ entry in this table for that particular
+ destination address. Entries are valid for
+ unicast and for group/broadcast addresses."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.7.2"
+ ::= { dot1dStatic 2 }
+
+ dot1dStaticEntry OBJECT-TYPE
+ SYNTAX Dot1dStaticEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Filtering information configured into the bridge
+ by (local or network) management specifying the
+ set of ports to which frames received from a
+ specific port and containing a specific
+ destination address are allowed to be forwarded."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 6.7.2"
+ INDEX { dot1dStaticAddress}--, dot1dStaticReceivePort }
+ ::= { dot1dStaticTable 1 }
+
+ Dot1dStaticEntry ::=
+ SEQUENCE {
+ dot1dStaticAddress
+ OCTET STRING (SIZE (6))
+-- dot1dStaticReceivePort
+-- INTEGER,
+-- dot1dStaticAllowedToGoTo
+-- INTEGER,
+-- dot1dStaticStatus
+-- INTEGER
+ }
+
+ dot1dStaticAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (6))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The destination MAC address in a frame to which
+ this entry's filtering information applies. This
+ object can take the value of a unicast address, a
+ group address or the broadcast address."
+ REFERENCE
+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
+ ::= { dot1dStaticEntry 1 }
+
+-- dot1dStaticReceivePort OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "Either the value '0', or the port number of the
+-- port from which a frame must be received in order
+-- for this entry's filtering information to apply.
+-- A value of zero indicates that this entry applies
+-- on all ports of the bridge for which there is no
+-- other applicable entry."
+-- ::= { dot1dStaticEntry 2 }
+
+-- dot1dStaticAllowedToGoTo OBJECT-TYPE
+-- SYNTAX INTEGER
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "The set of ports to which frames received from a
+-- specific port and destined for a specific MAC
+-- address, are allowed to be forwarded. Each octet
+-- within the value of this object specifies a set of
+-- eight ports, with the first octet specifying ports
+-- 1 through 8, the second octet specifying ports 9
+-- through 16, etc. Within each octet, the most
+-- significant bit represents the lowest numbered
+-- port, and the least significant bit represents the
+-- highest numbered port. Thus, each port of the
+-- bridge is represented by a single bit within the
+-- value of this object. If that bit has a value of
+-- '1' then that port is included in the set of
+-- ports; the port is not included if its bit has a
+-- value of '0'. (Note that the setting of the bit
+-- corresponding to the port from which a frame is
+-- received is irrelevant.) The default value of
+-- this object is a string of ones of appropriate
+-- length."
+-- ::= { dot1dStaticEntry 3 }
+--
+-- dot1dStaticStatus OBJECT-TYPE
+-- SYNTAX INTEGER {
+-- other(1),
+-- invalid(2),
+-- permanent(3),
+-- deleteOnReset(4),
+-- deleteOnTimeout(5)
+-- }
+-- ACCESS read-write
+-- STATUS mandatory
+-- DESCRIPTION
+-- "This object indicates the status of this entry.
+-- The default value is permanent(3).
+-- other(1) - this entry is currently in use but
+-- the conditions under which it will
+-- remain so are different from each of the
+-- following values.
+-- invalid(2) - writing this value to the object
+-- removes the corresponding entry.
+-- permanent(3) - this entry is currently in use
+-- and will remain so after the next reset
+-- of the bridge.
+-- deleteOnReset(4) - this entry is currently in
+-- use and will remain so until the next
+-- reset of the bridge.
+-- deleteOnTimeout(5) - this entry is currently
+-- in use and will remain so until it is
+-- aged out."
+-- ::= { dot1dStaticEntry 4 }
+
+
+
+
+
+ProtocolFilterGRP OBJECT IDENTIFIER ::= {atmelSys 6}
+
+ProtocolFilterNum OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter's value indicates the number of the currently
+ protocol filters."
+ ::= { ProtocolFilterGRP 1 }
+
+
+
+
+ ProtocolFilterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ProtocolFilterEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "A table containing filtering information
+ configured into the bridge by (local or network)
+ management specifying the set of protocol filter."
+ ::= { ProtocolFilterGRP 2 }
+
+ protocolFilterEntry OBJECT-TYPE
+ SYNTAX ProtocolFilterEntry
+ ACCESS not-accessible
+ STATUS mandatory
+ DESCRIPTION
+ "Filtering information configured into the bridge
+ by (local or network) management specifying the
+ set of protocol filter."
+ INDEX { ProtocolFilterCode }
+ ::= { ProtocolFilterTable 1 }
+
+ ProtocolFilterEntry ::=
+ SEQUENCE {
+ ProtocolFilterCode
+ OCTET STRING (SIZE (2)),
+ ProtocolFilterDescription
+ DisplayString (SIZE (0..255)),
+ ProtocolFilterActivity
+ INTEGER
+ }
+
+ ProtocolFilterCode OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (2))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The protocol code configured into the bridge
+ by (local or network) management specifying the
+ set of protocol filter."
+ ::= { protocolFilterEntry 1 }
+
+ ProtocolFilterDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A textual description of the protocol."
+ ::= { protocolFilterEntry 2 }
+
+ ProtocolFilterActivity OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This object indicates the status of this filter."
+ ::= { protocolFilterEntry 3 }
+
+
+
+
+
+EthStatisticsGRP OBJECT IDENTIFIER ::= {atmelSys 7}
+
+EthRxStatistics OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (64))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Rx Statistics."
+ ::= {EthStatisticsGRP 1 }
+
+EthTxStatistics OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (56))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Ethernet Tx Statistics."
+ ::= {EthStatisticsGRP 2 }
+
+
+
+
+
+
+
+TestModeSettingsGRP OBJECT IDENTIFIER ::= {atmelSys 8}
+
+TestModeOnOff OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= { TestModeSettingsGRP 1 }
+
+
+TestModeCommandStruct OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {TestModeSettingsGRP 2 }
+
+TestModeRadioConfiguration OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (14))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "Configuration of radio derive from tests."
+ ::= {TestModeSettingsGRP 8 }
+
+TestModeStatistics OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (8))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Statistics derive from tests."
+ ::= {TestModeSettingsGRP 9 }
+
+
+
+
+
+
+AuthorizedSettingsGRP OBJECT IDENTIFIER ::= {atmelSys 9}
+
+AuthorizedUserPass OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {AuthorizedSettingsGRP 1 }
+
+
+AuthorizedAdminPass OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {AuthorizedSettingsGRP 2 }
+
+
+AuthorizedManufactPass OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (16))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {AuthorizedSettingsGRP 3 }
+
+
+--*************************** wireless ***************************
+--****************************************************************
+
+
+
+OperationalSettingsGRP OBJECT IDENTIFIER ::= {wireless 1}
+
+
+
+
+operChannelID OBJECT-TYPE
+ SYNTAX INTEGER {
+ channel1(1),
+ channel2(2),
+ channel3(3),
+ channel4(4),
+ channel5(5),
+ channel6(6),
+ channel7(7),
+ channel8(8),
+ channel9(9),
+ channel10(10),
+ channel11(11),
+ channel12(12),
+ channel13(13),
+ channel14(14)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The operating frequency channel. Valid numbers
+ are as defind in ISO/IEC 8802-11:1999, 15.4.6.2."
+ ::= { OperationalSettingsGRP 1 }
+
+
+operESSIDLength OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The ESSID Length"
+ ::= {OperationalSettingsGRP 2 }
+
+operESSID OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (32))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The network name. The size of the network name
+ should not be more than 32 characters long."
+ ::= {OperationalSettingsGRP 3 }
+
+
+operRTSThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute indicates the number of bytes in an
+ MPDU (frame), above which an RTS/CTS handshake will be
+ performed. Setting this attribute to be larger than the
+ maximum frame size, will prevent the RTS/CTS handshake
+ for frames trassmitted by this station."
+ ::= {OperationalSettingsGRP 4 }
+
+
+operFragmentationThreshold OBJECT-TYPE
+ SYNTAX INTEGER
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute indicates the number of bytes in an
+ MPDU (frame), above which MPDU fragmentation will be
+ performed."
+ ::= {OperationalSettingsGRP 5 }
+
+
+operPreambleType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ShortPreamble(1),
+ LongPreamble(2)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter's value indicates the number of the currently
+ associated STAtions. Associated STAtions should not be more
+ than 2007."
+ ::= {OperationalSettingsGRP 6 }
+
+
+operAuthenticationType OBJECT-TYPE
+ SYNTAX INTEGER {
+ openSystem(1),
+ sharedKey(2),
+ BothType(3)
+ }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute indicates the authentication algorithm
+ used during the authentication sequence.
+ The value of this attribute is one of the following:
+ 1 - Open System,
+ 2 - Shared Key
+ 3 - Both Type "
+ ::= {OperationalSettingsGRP 7 }
+
+
+operBasicRates OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (4))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute indicates the basic rates of AP-Bridge."
+ ::= { OperationalSettingsGRP 8 }
+
+
+operAutoRateFallBack OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute indicates if Auto Rate Fall Back is enable or disable."
+ ::= {OperationalSettingsGRP 9 }
+
+operAccessPointName OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (32))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The AP name."
+ ::= {OperationalSettingsGRP 10 }
+
+
+
+
+
+privacyGRP OBJECT IDENTIFIER ::= { wireless 2 }
+
+
+
+defaultWEPKey1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (13))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A WEP default secret key value."
+ ::= { privacyGRP 1 }
+
+defaultWEPKey2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (13))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A WEP default secret key value."
+ ::= { privacyGRP 2 }
+
+defaultWEPKey3 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (13))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A WEP default secret key value."
+ ::= { privacyGRP 3 }
+
+defaultWEPKey4 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (13))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "A WEP default secret key value."
+ ::= { privacyGRP 4 }
+
+
+
+privacyWEPEnable OBJECT-TYPE
+ SYNTAX INTEGER {enable64(1),disable(2),enable128(3) }
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute, when true, indicates that the 802.11
+ standard encryption mechanism (WEP) is implemented."
+ ::= {privacyGRP 5}
+
+
+privacyDefaultWEPKeyID OBJECT-TYPE
+ SYNTAX INTEGER (1..4)
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "This attribute shall indicate the use of the first, second,
+ third or fourth DefaultWEPKey when set to values of one, two,
+ three or four."
+ ::= {privacyGRP 6}
+
+
+
+
+WLstatisticsGRP OBJECT IDENTIFIER ::= {wireless 3}
+
+wirelessStatistics OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (88))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "Wireless Statistics. 22 elements(ULONG)."
+ ::= {WLstatisticsGRP 1 }
+
+
+
+WLSiteSurveyGRP OBJECT IDENTIFIER ::= {wireless 4}
+
+ChannelStatus OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (14))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {WLSiteSurveyGRP 1}
+
+
+
+AssociatedStationsGRP OBJECT IDENTIFIER ::= {wireless 5}
+
+AssociatedSTAsNum OBJECT-TYPE
+ SYNTAX INTEGER (1..2007)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "This parameter's value indicates the number of the currently
+ associated STAtions. Associated STAtions should not be more
+ than 2007."
+ ::= { AssociatedStationsGRP 1 }
+
+
+AssociatedSTAsInfo OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (24))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The associated STAtion's Information."
+ ::= { AssociatedStationsGRP 2 }
+
+
+
+AuthorizedMacAddressesGRP OBJECT IDENTIFIER ::= {wireless 6}
+
+AuthorizationMacEnable OBJECT-TYPE
+ SYNTAX INTEGER {enable(1),disable(2)}
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {AuthorizedMacAddressesGRP 1}
+
+
+
+AuthorizedMac OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (64))
+ ACCESS read-write
+ STATUS mandatory
+ DESCRIPTION
+ "The Authorized Wireless Mac Addresses."
+ ::= { AuthorizedMacAddressesGRP 2 }
+
+
+
+
+WLKnownAPGRP OBJECT IDENTIFIER ::= {wireless 7}
+
+wirelessKnownAPsNum OBJECT-TYPE
+ SYNTAX INTEGER (1..8)
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {WLKnownAPGRP 1 }
+
+
+
+wirelessKnownAPs OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (32))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "."
+ ::= {WLKnownAPGRP 2 }
+
+
+
+--*************************** Traps ***************************
+--*************************************************************
+
+trapSTAMacAddress OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (6))
+ ACCESS read-only
+ STATUS mandatory
+ DESCRIPTION
+ "The MAC address of a station device"
+
+ ::= {traps 1}
+
+
+trapReassociation TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ trapSTAMacAddress
+ }
+ DESCRIPTION
+ "This trap message is sent when a STAtion's reassosiation
+ request is received."
+ ::= 1
+
+trapRoamOut TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ trapSTAMacAddress
+ }
+ DESCRIPTION
+ "This trap message is used to indicate tha a STAtion has
+ roamed out of the Wireless bridge's coverage area."
+ ::= 2
+
+trapAssociation TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ trapSTAMacAddress
+ }
+ DESCRIPTION
+ "Indicates the reception of an association request packet
+ and the sender STAtion's successful association with the
+ Wireless Bridge."
+ ::= 3
+
+trapDisassociation TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ trapSTAMacAddress
+ }
+ DESCRIPTION
+ "This trap message is sent when a dissasociation notification
+ packet is received from a STAtion."
+ ::= 4
+
+trapAssociationExpire TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ trapSTAMacAddress
+ }
+ DESCRIPTION
+ "When the association's maximum time interval expires for
+ an associated STAtion this trap message is sent."
+ ::= 5
+
+trapReset TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ sysReset
+ }
+ DESCRIPTION
+ "This trap message is sent when Bridge Resets."
+ ::= 6
+
+trapSettingPingIPAddress TRAP-TYPE
+ ENTERPRISE atmel
+ VARIABLES {
+ operIPAddress
+ }
+ DESCRIPTION
+ "This trap message is sent when the ATMEL Bridge IP address
+ is set with the transmition of a ping message."
+ ::= 7
+
+trapStartUp TRAP-TYPE
+ ENTERPRISE atmel
+-- apparently the 4.2.1 ucd-snmp tools do not liek
+-- empty variable blocks - msp 9jul2001
+-- VARIABLES {
+-- }
+ DESCRIPTION
+ "This trap message is sent when Bridge Starts Up."
+ ::= 8
+
+trapFailedToEraseFlash TRAP-TYPE
+ ENTERPRISE atmel
+-- apparently the 4.2.1 ucd-snmp tools do not liek
+-- empty variable blocks - msp 9jul2001
+ --VARIABLES {
+ --}
+ DESCRIPTION
+ "This trap message is sent when Bridge Failed To Erase Flash."
+ ::= 9
+
+
+END
projects / ap-utils.git / blobdiff