Chuck Lever [Mon, 18 May 2009 15:17:49 +0000 (11:17 -0400)]
mount: remove legacy version of nfs_name_to_address()
Currently we have two separate copies of nfs_name_to_address() since
some older glibc's don't define AI_ADDRCONFIG. This means extra
work to build- and run-test both functions when code is changed in
this area.
It is also the case that gethostbyname(3) is deprecated, and should
not be used in new code.
Remove the legacy code in favor of always using getaddrinfo(3).
We can also get rid of nfs_name_to_address()'s @family argument as
well.
Note also this addresses a bug in nfsumount.c -- it was calling
nfs_name_to_address() with AF_UNSPEC unconditionally, even if the
legacy version of nfs_name_to_address(), which doesn't support
AF_UNSPEC, was in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 18 May 2009 15:08:53 +0000 (11:08 -0400)]
sm-notify: Failed DNS lookups should be retried
Currently, if getaddrinfo(3) fails when trying to resolve a hostname,
sm-notify gives up immediately on that host. If sm-notify is started
before network service is available on a system, that means it quits
without notifying anyone. Or, if DNS service isn't available due to
a network partition or because the DNS server crashed, sm-notify will
simply remove all of its callback files and exit.
Really, sm-notify should try harder. We know that the hostnames
passed in to notify_host() have already been vetted by statd, which
won't monitor a hostname that it can't resolve. So it's likely that
any DNS failure we meet here is a temporary condition. If it isn't,
then sm-notify will stop trying to notify that host in 15 minutes
anyway.
[ The host's file is left in /var/lib/nfs/sm.bak in this case, but
sm.bak is not read again until the next time sm-notify runs. ]
sm-notify already has retry logic for handling RPC timeouts. We can
co-opt that to drive DNS resolution retries.
We also add AI_ADDRCONFIG because on systems whose network startup is
handled by NetworkManager, there appears to be a bug that causes
processes that started calling getaddinfo(3) before the network came
up to continue getting EAI_AGAIN even after the network is fully
operating.
As I understand it, legacy glibc (before AI_ADDRCONFIG was exposed in
headers) sets AI_ADDRCONFIG by default, although I haven't checked
this. In any event, pre-glibc-2.2 systems probably won't run
NetworkManager anyway, so this may not be much of a problem for them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 18 May 2009 15:03:54 +0000 (11:03 -0400)]
sm-notify: Don't orphan addrinfo structs
sm-notify orphans an addrinfo struct in its address list rotation
logic if only a single result was returned from getaddrinfo(3).
For each host, the first time through notify_host(), we want to
send a PMAP_GETPORT request. ->ai is NULL, and retries is set to 100,
forcing a DNS lookup and an address rotation. If only a single
addrinfo struct is returned, the rotation logic causes a NULL to be
planted in ->ai, copied from the ai_next field of the returned result.
This means that the second time through notify_host() (to perform the
actual SM_NOTIFY call) we do a second DNS lookup, since ->ai is NULL.
The result of the first lookup has been orphaned, and extra network
traffic is generated.
This scenario is actually fairly common. Since we pass
.ai_protocol = IPPROTO_UDP,
to getaddrinfo(3), for most hosts, which have a single forward and
reverse pointer in the DNS database, we get back a single addrinfo
struct as a result.
To address this problem, only perform the address list rotation if
there is more than one element on the list returned by getaddrinfo(3).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Benny Halevy [Mon, 4 May 2009 15:44:49 +0000 (11:44 -0400)]
utils/nfsd: add support for minorvers4
minorvers4 can be used to either enable or disable nfsv4.x.
If minorvers4 is a positive integer n, in the allowed range (only
minorversion 1 is supported for now), the string "+4.n" is appended
to the versions string written onto /proc/fs/nfsd/versions.
Correspondingly, if minorver4 is a negative integer -n, the string
"-4.n" is written.
With the default value, minorvers4==0, the minor version
setting is not changed.
Note that unlike the protocol versions 2, 3, or 4. The minor version
setting controls the *maximum* minor version nfsd supports. Particular
minor version cannot be controlled on their own. With only minor
version 1 supported at the moment the difference doesn't matter,
but for future minor versions greater than 1, enabling minor
version X will enable support for all minor versions 1 through X.
Disabling minor version X will disable support for minor
versions X and up, enabling 1 through X-1.
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Sat, 18 Apr 2009 13:43:58 +0000 (09:43 -0400)]
support: Provide an API for creating a privileged RPC client
We needed to guarantee that some RPC programs, such as PMAP, got an
unprivileged port, to prevent exhausting the local privileged port
space sending RPC requests that don't need such privileges.
nfs_get_rpcclient() provides that feature.
However, some RPC programs, such as MNT and UMNT, require a privileged
port. So, let's provide an additional API for this that also supports
IPv6 and setting a destination port.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
as currently printed c is the version number, not a string char,
therefore is should be printed as %d not %c. That said, just print
optarg as %s since it might be non-numeric.
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 15 Apr 2009 16:38:40 +0000 (12:38 -0400)]
nfs-utils: reverse order of librpcsecgss and libgssglue checks
The check that validates the version of librpcsecgss also needs to
have libgssglue installed. Without libgssglue, ./configure complains
that it can't find rpcsecgss, even though it's installed.
It also turns out that the error message generated by pkg-config is
more complete than the one we have in aclocal/rpcsec_vers.m4, so just
let those PKG_CHECK_MODULES m4 macros use the default error message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 16:04:06 +0000 (12:04 -0400)]
nfs-utils: add IPv6 code to gssd
All of the pieces to handle IPv6 are now in place. Add IPv6-specific
code wrapped in the proper #ifdef's so that IPv6 support works when
it's enabled at build-time.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 16:01:46 +0000 (12:01 -0400)]
nfs-utils: switch gssd to use standard function for getting an RPC client
We already have a common function for setting up an RPC client. That
function uses the tirpc API when tirpc is enabled and is also already
IPv6 enabled. Switch gssd to use it.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 15:36:07 +0000 (11:36 -0400)]
nfs-utils: query for remote port using rpcbind instead of getaddrinfo
We already have the server's address from the upcall, so we don't really
need to look it up again, and querying the local services DB for the
port that the remote server is listening on is just plain wrong.
Use rpcbind to set the port for the program and version that we were
given in the upcall. The exception here is NFSv4. Since NFSv4 mounts
are supposed to use a well-defined port then skip the rpcbind query
for that and just set the port to the standard one (2049).
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 15:34:51 +0000 (11:34 -0400)]
nfs-utils: store the address given in the upcall for later use
The current upcall could be more efficient. We first convert the address
to a hostname, and then later when we set up the RPC client, we do a
hostname lookup to convert it back to an address.
Begin to change this by keeping the address in the clnt_info that we get
out of the upcall. Since a sockaddr has a port field, we can also
eliminate the port from the clnt_info.
Finally, switch to getnameinfo() instead of gethostbyaddr(). We'll need
to use that call anyway when we add support for IPv6.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Wed, 15 Apr 2009 14:29:04 +0000 (10:29 -0400)]
nfs-utils: make getnameinfo() required for --enable-gss
Systems that are so old that they don't have getnameinfo() in glibc are
probably also running kernels that are so old that they don't support
gssapi upcalls anyway.
Make --enable-gss dependent on the presence of the getnameinfo()
function. This allows us to reduce some conditional compilation.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Wed, 8 Apr 2009 14:26:26 +0000 (10:26 -0400)]
The --list option does not work on server stats.
The print_stats_list() routine was using the client's
stats to decide whether to display any stats. This did
not work when there was only server stats.
This patch breaks up print_stats_list into two different
routines allowing both server and clients stats to be
listed.
Steve Dickson [Wed, 8 Apr 2009 13:28:22 +0000 (09:28 -0400)]
Eliminate the displaying zero stats when the explicit protocol
is specified (-2, -3, -4) the -Z and or --list options.
When a particular protocol is specified and either
the -Z or --list options are used, zeros or blank lines
are echoed to the screen when there is not any NFS traffic.
This cause any useful data to be scroll off the screen.
With this patch only non-zero stats will be shown, which
makes the output of these options more condensed and
in turn more useful.
nfsstat.c: Adds the --list flag to print information in a list format
instead of the standard multi-column format
nfsstat.man: Updates the manpage to include the --list flag.
Signed-off-by: Kevin Constantine <kevin.constantine@disneyanimation.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Kevin Coffman [Fri, 3 Apr 2009 19:18:16 +0000 (15:18 -0400)]
svcgssd: check the return code from qword_eol() and log failures
If qword_eol() fails while writing the context information, log
an indication of the failure.
This addresses at least one cause of the intermittent, and
previously undiagnosed, problem of the server returning
GSS_S_NO_CONTEXT when a context was seemingly successfully
created and sent down to the kernel. In my case there was a
mis-match between kernel and user-land configuration resulting in
the proper kernel module not being loaded. Therefore the write
of the context failed, but was not logged by svcgssd. When the
kernel goes to find the resulting context, it was really not
there and correctly returned GSS_S_NO_CONTEXT to the client.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
Ben Myers [Fri, 3 Apr 2009 19:13:10 +0000 (15:13 -0400)]
Mountd should use separate lockfiles
Mountd keeps file descriptors used for locks separate from
those used for io and seems to assume that the lock will
only be released on close of the file descriptor that was used
with fcntl. Actually the lock is released when any file
descriptor for that file is closed. When setexportent() is called
after xflock() he closes and reopens the io file descriptor and defeats the
lock.
This patch fixes that by using a separate file for locking, cleaning
them up when finished.
Signed-off-by: Ben Myers <bpm@sgi.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Fri, 3 Apr 2009 19:03:15 +0000 (15:03 -0400)]
nfs-utils: fix AC_CHECK_FUNC calls in configure.ac
AC_CHECK_FUNC and AC_CHECK_FUNCS take 3 args. Any ones beyond that are
ignored. In several places, we're passing the "action-if-not-found" in
as the 4th arg so it's being ignored.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Mon, 23 Mar 2009 21:13:01 +0000 (17:13 -0400)]
In recent Fedora builds, the '-D _FORTIFY_SOURCE=2' compile
flag has been set. This cause warnings to be generated when
return values from reads/writes (and other calls) are not
checked. The patch address those warnings.
Jeff Layton [Mon, 23 Mar 2009 12:12:37 +0000 (08:12 -0400)]
gssd: free buffer allocated by gssd_k5_err_msg
There's no way for the caller of gssd_k5_err_msg to know whether to free
the string it returns. It can call krb5_get_error_message which returns
a string that must be freed via krb5_free_error_string. The other ways
that it can return a string require that the memory not be freed.
Deal with this by copying the string to a new buffer in all cases. Then
we can properly free the string allocated by krb5_get_error_message.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Mon, 23 Mar 2009 12:12:14 +0000 (08:12 -0400)]
gssd: NULL-terminate buffer after read in read_service_info (try #2)
Valgrind complains that we're passing an unintialized buffer to sscanf
here. The main problem seems to be that we're not ensuring that the
buffer is NULL terminated before we pass it off.
This is the second version of this patch, the first one did not increase
the buffer allocation by 1 which could have led to clobbering the next
byte on the stack if nbytes == INFOBUFLEN.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Mon, 23 Mar 2009 12:11:41 +0000 (08:11 -0400)]
gssd: initialize fakeseed in prepare_krb5_rfc1964_buffer
This causes a compiler warning and also means that we're stuffing
the buffer with uninitialized junk from the stack. Other places in
this code initialize "fakeseed" to 0. Do the same here.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 16 Mar 2009 17:42:44 +0000 (13:42 -0400)]
nfs-utils: clean up handling of libgssglue in gssd Makefile
From: Jeff Layton <jlayton@redhat.com>
Make the pkgconfig check for libgssglue conditional on tirpc being
enabled. When it's disabled, the pkgconfig check for librpcsecgss will
pull in the gssglue lib and include dir automatically.
Also, make sure we include GSSGLUE_CFLAGS and the GSSGLUE_LIBS to the
appropriate places in utils/gssd/Makefile.am so that we pick up
the gssglue libs when tirpc is enabled.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 16 Mar 2009 17:40:47 +0000 (13:40 -0400)]
nfs-utils: Include legacy or TI-RPC headers, not both
Data type incompatibilities between the legacy RPC headers and the
TI-RPC headers mean we can't use libtirpc with code that was compiled
against the legacy RPC headers. The definition of rpcprog_t for
example is "unsigned long" in the legacy library, but it's "uint32_t"
for TI-RPC. On 32-bit systems, these types happen to have the same
width, but on 64-bit systems they don't, making more complex data
structures that use these types in fields ABI incompatible.
Adopt a new strategy to deal with this issue. When --enable-tirpc is
set, append "-I/usr/include/tirpc" to the compilation steps. This
should cause the compiler to grab the tirpc/ headers instead of the
legacy headers. Now, for TI-RPC builds, the TI-RPC legacy functions
and the TI-RPC headers will be used. On legacy systems, the legacy
headers and legacy glibc RPC implementation will be used.
A new ./configure option is introduced to allow system integrators to
use TI-RPC headers in some other location than /usr/include/tirpc.
/usr/include/tirpc remains the default setting for this new option.
The gssd implementation presents a few challenges, but it turns out
the gssglue library is similar to the auth_gss pieces of TI-RPC. To
avoid similar header incompatibility issues, gssd now uses libtirpc
instead of libgssglue if --enable-tirpc is specified. There may be
other issues to tackle with gssd, but for now, we just make sure it
builds with --enable-tirpc.
Note also: svc_getcaller() is a macro in both cases that points to
a sockaddr field in the svc_req structure. The legacy version points
to a sockaddr_in type field, but the TI-RPC version points to a
sockaddr_in6 type field.
rpc.mountd unconditionally casts the result of svc_getcaller() to a
sockaddr_in *. This should be OK for TI-RPC as well, since rpc.mountd
still uses legacy RPC calls (provided by glibc, or emulated by TI-RPC)
to set up its listeners, and therefore rpc.mountd callers will always
be from AF_INET addresses for now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 16 Mar 2009 17:30:26 +0000 (13:30 -0400)]
configure: pull common nfsidmap and event checks into aclocal/
Clean up: Create an aclocal script for the nfsidmap library and
headers checks used for both --enable-gss and --enable-nfsv4.
Move libevent checks out too.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 16 Mar 2009 17:29:18 +0000 (13:29 -0400)]
nfs-utils: replace function-specific switches with HAVE_LIBTIRPC
Instead of switching in TI-RPC-specific logic with a function-specific
switch like HAVE_CLNT_VG_CREATE, let's use the more generic
HAVE_LIBTIRPC macro everywhere.
This simplifies ./configure (always a good thing), and makes it more
clear in the source code exactly what the extra conditionally compiled
code is for.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 16 Mar 2009 17:28:42 +0000 (13:28 -0400)]
configure: move TI-RPC checks into aclocal
Define an aclocal test for TI-RPC headers and library, and move the
TI-RPC checks earlier in our configure script so other feature checks
can use the availability of TI-RPC to decide what to do.
Since bindresvport_sa is required just for IPv6 support, move that
check to the IPv6 feature tests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Sun, 8 Mar 2009 14:10:25 +0000 (10:10 -0400)]
Added back the some logging variables which are no
longer used but, unfortunately, they are extern-ed by
public headers files which are not under the control
of this package.
Spotted-by: Juergen Daubert <jue@jue.li> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 5 Mar 2009 11:23:25 +0000 (06:23 -0500)]
gssd: include gssapi/gssapi.h before write_bytes.h
In gssd/context_lucid.c, ensure that gss_buffer_desc and gss_OID_desc
are defined before write_bytes.h, which uses these definitions, is
included. With TI-RPC, these definitions are not provided by
rpc/rpc.h.
It appears that <gssapi/gssapi_krb5.h> already includes krb5.h and
gssapi.h (on my system, anyway) so let's drop those includes.
Ideally write_bytes.h itself should include the needed headers, but
some source files that use Heimdal include a different, Heimdal-
compatible, header to get these definitions.
Pointed-out-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 5 Mar 2009 11:21:34 +0000 (06:21 -0500)]
mount.nfs: squelch compiler warning for TI-RPC builds
The printf format string in nfs_pp_debug() assumes the @program and
@version arguments are unsigned long, because the legacy RPC headers
define both rpcprog_t and rpcvers_t as unsigned long types.
However, the TI-RPC headers define both types as uint32_t, which
requires a different printf format type. If we replace the legacy
headers with TI-RPC headers, this type mismatch generates compiler
warnings that are nothing but noise.
We are about to provide a switch at ./configure time to allow the use
of either the legacy RPC headers or the TI-RPC headers, so we need
a printf format that works in both cases.
To squelch the compiler warnings that occur when using the TI-RPC
headers, cast both arguments in the fprintf statement to the widest of
the two types ("unsigned long" or "uint32_t").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 5 Mar 2009 11:20:40 +0000 (06:20 -0500)]
nfs-utils: Provide type-checked version of svc_getcaller()
TI-RPC's version of the svc_getcaller() macro points to a sockaddr_in6,
not a sockaddr_in, though for AF_INET callers, an AF_INET address
resides there. To squelch compiler warnings when the TI-RPC version of
the svc_req structure is used, add inline helpers with appropriate
type casting.
Note that tcp_wrappers support only AF_INET addresses for now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 5 Mar 2009 11:16:04 +0000 (06:16 -0500)]
configure: Remove CPPFLAGS substitution
At least on my systems, the AM_CPPFLAGS substitution at the end of
configure.ac is not needed. It adds an extra copy of
"-I../../support/includes" to each compile step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 4 Mar 2009 20:54:39 +0000 (15:54 -0500)]
configure: fix AC_CACHE_VAL warnings on Fedora 10
Autoconf 2.63 (and maybe earlier releases) complains about the cache
variable name used in aclocal/libblkid.m4:
configure.ac:217: warning: AC_CACHE_VAL(libblkid_is_recent, ...):
suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1974: AC_CACHE_VAL is expanded from...
aclocal/libblkid.m4:2: AC_BLKID_VERS is expanded from...
configure.ac:217: the top level
This addresses
https://bugzilla.redhat.com/attachment.cgi?bugid=481386 .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Wed, 4 Mar 2009 20:36:27 +0000 (15:36 -0500)]
General clean up. Removed unused routines. Reworked syslog
message to (hopefully) make it more sensible. Move
"#ifdef HAVE_LIBWRAP" around so nothing will be defined
when tcp wrapper is not configured.
Steve Dickson [Wed, 4 Mar 2009 20:24:58 +0000 (15:24 -0500)]
Converted good_client() to correctly use the tcp wrapper
interface and added a note to the mountd man page saying
hostnames will be ignored when they can not be looked up.
Tomas Richter [Wed, 18 Feb 2009 18:33:27 +0000 (13:33 -0500)]
Exportfs and rpc.mountd optimalization
There were some problems with exportfs and rpc.mountd for long export
lists - see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=76643
I do optimalization as my bachelors thesis (Facuulty of informatics,
Masaryk's university Brno, Czech Republic), under lead of Yenya
Kasprzak.
Both exportfs and rpc.mount build linked list of exports (shared
functions in export.c). Every time they are inserting new export into
list, they search for same export in list.
I replaced linked list by hash table and functions export_add and
export_lookup by functions hash_export_add and hash_export_lookup
(export.c).
Because some other functions required exportlist as linked list, hash
table has some implementation modification im comparison with ordinary
hash table. It also keeps exports in linked list and has pointer to
head of the list. So there's no need of implementation function
<for_all_in_hash_table>.
Signed-off-by: Tomas Richter <krik3t@gmail.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 17 Feb 2009 21:26:31 +0000 (16:26 -0500)]
umount.nfs command: Support AF_INET6 server addresses
Replace existing mount option parser in nfsumount.c with the new pmap
stuffer
function nfs_options2pmap(). Mount option parsing for umount.nfs now
works
the same as it does for mount option rewriting in the text-based
mount.nfs
command.
This adds a number of new features:
1. The new logic supports resolving AF_INET6 server addresses
2. Support is added for the recently introduced "mountaddr" option.
3. Parsing numeric option values is much more careful
4. Option parsing no longer uses xmalloc/xstrdup, so it won't fail
silently if memory can't be allocated
5. Mount program number set in /etc/rpc is respected
6. Mount doesn't exit with EX_USAGE if the hostname lookup fails
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 17 Feb 2009 21:25:27 +0000 (16:25 -0500)]
umount.nfs command: Add an AF_INET6-capable version of nfs_call_unmount()
We need an AF_INET6-capable version of nfs_call_unmount() to allow the
umount.nfs command to support unmounting NFS servers over IPv6. The
legacy
mount.nfs command still likes to use nfs_call_umount(), so we leave it
in
place and introduce a new API that can take a "struct sockaddr *".
The umount.nfs command will invoke this new API, but we'll leave the
legacy
mount.nfs command and the umount.nfs4 command alone. The umount.nfs4
command does not need this support because NFSv4 unmount operations are
entirely local.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Tue, 17 Feb 2009 20:33:58 +0000 (15:33 -0500)]
The mount sockaddr len (mnt_salen) is not be set in
nfs_extract_server_addresses() which causes the mount.nfs
command to segmentation fault when a NFS server only
supports UDP mounts.
Chuck Lever [Tue, 17 Feb 2009 20:19:58 +0000 (15:19 -0500)]
text-based mount command: fix return value from po_rightmost()
Recently commit 0dcb83a8 changed the po_rightmost() function to
distinguish among several possible mount options by taking a table
containing the alternatives, and returning the table index of the
entry which is rightmost in the mount option string.
If it didn't find any mount option that matches an entry from the
passed-in table, it returned zero. This was the same behavior it had
before, when it only checked for two options at a time. It returned
PO_NEITHER_FOUND, which was zero.
Since this is C, however, zero also happens to be a valid index into
the passed-in array of options.
Modify the po_rightmost() function to return -1 if the entry wasn't
found, and fix up the callers to look for a C-style array index that
starts at zero.
Thanks to Steve Dickson for troubleshooting the problem. His solution
was merely to bump the return value, as callers already expected an
ordinal index instead of a C-style index.
I prefer this equivalent but slightly more extensive change because it
makes the behavior of po_rightmost() more closely match how humans
understand C arrays to work. Let's address some of the confusion that
caused this bug, as well as fixing the run-time behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 27 Jan 2009 22:48:17 +0000 (17:48 -0500)]
text-based mount command: support AF_INET6 in rewrite_mount_options()
Now that we have an AF_INET6-capable probe_bothports(), we can support
AF_INET6 when rewriting text-based NFS mount options. This should be
adequate to support NFS transport protocol and version negotiation with
AF_INET6 NFS servers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 27 Jan 2009 22:45:48 +0000 (17:45 -0500)]
text-based mount options: Use new pmap stuffer when rewriting mount options
all nfs_options2pmap() in nfs_rewrite_mount_options() instead of
open-coding the logic to convert mount options to a pmap struct.
The new nfs_options2pmap() function is more careful about avoiding
invalid mount option values, and handles multiply-specified transport
protocol options correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 27 Jan 2009 22:43:29 +0000 (17:43 -0500)]
text-based mount command: Function to stuff "struct pmap" from mount options
Both the text-based mount.nfs command and the umount.nfs command need
to fill in a pmap structure based on string mount options. Introduce
a shared function that can do this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 27 Jan 2009 22:41:02 +0000 (17:41 -0500)]
text-based mount command: make po_rightmost() work for N options
Sometimes we need to choose the rightmost option among multiple
different mount options. For example, we want to find the rightmost
of "proto," "tcp," and "udp". Or, the rightmost of "vers," "nfsvers,"
"v2," and "v3".
Update po_rightmost() to choose among N options instead of just two.
Chuck Lever [Wed, 7 Jan 2009 17:18:11 +0000 (12:18 -0500)]
configure: Add new build option "--enable-tirpc"
Allow easier testing of nfs-utils in legacy environments by providing
a "configure" option to force the build not to use libtirpc, even if
it's present on the build system. This can also be tried as a
fallback if problems are found with the new TI-RPC-based nfs-utils
code.
Chuck Lever [Tue, 6 Jan 2009 17:35:15 +0000 (12:35 -0500)]
configure: use "--disable-uuid" instead of "--without-uuid"
Reported by Kevin Coffman and Jonathan Andrews. Apparently --without-uuid
doesn't work with some older versions of autoconf, so correct the help text
to document the option that actually does the trick.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 6 Jan 2009 17:08:33 +0000 (12:08 -0500)]
mount: getport: don't use getaddrinfo(3) on old systems
Older glibc versions have a getaddrinfo(3) that doesn't support
AI_ADDRCONFIG. Detect that case and build something else for
getport.c that will work adequately on those systems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 6 Jan 2009 17:07:04 +0000 (12:07 -0500)]
mount command: use gethostbyname(3) when building on old systems
Glibc's getaddrinfo(3) implementation was added over time. Some old
versions support AI_ADDRCONFIG, but don't define it in header files.
Some older versions don't support AI_ADDRCONFIG at all.
Let's add specific checks to configure.ac to see that the local
getaddrinfo(3) implementation is complete. If it isn't, we will make
available a resolver that uses gethostbyname(3) and disable IPv6
entirely.
This patch should apply to 1.1.4 as well as the current nfs-utils repo.
The next patch has a fix for the getaddrinfo(3) call added since 1.1.4
in support/nfs/getport.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 6 Jan 2009 17:03:26 +0000 (12:03 -0500)]
mount: revert recent fix for build problems on old systems
Revert the patch that added local definitions of AI_ADDRCONFIG and
friends to utils/mount/network.c. While old header versions don't
have those flags, even older versions of getaddrinfo(3) don't
support those flags at all.
The result is this error:
mount.nfs: DNS resolution failed for 10.10.10.10: Bad value for ai_flags
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Kevin Coffman [Mon, 5 Jan 2009 19:07:05 +0000 (14:07 -0500)]
gssd: By default, don't spam syslog when users' credentials expire
Change the priority of "common" log messages so that syslog doesn't get
slammed/spammed when users' credentials expire, or there is another
common
problem which would cause error messages for all context creation
requests.
Note that this will now require that gssd or svcgssd option "-v" is used
to
debug these common cases.
Original patch from Andrew Pollock <apollock@google.com>.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com> CC: Andrew Pollock <apollock@google.com>
Steve Dickson [Sat, 3 Jan 2009 19:08:25 +0000 (14:08 -0500)]
Now that the TCP wrapper actually works, mounts will
be denied with misconfigured DNS configurations. Warnings
will be logged when these types of configurations are
detected.
Steve Dickson [Fri, 19 Dec 2008 19:20:14 +0000 (14:20 -0500)]
To ensure the hash table of clients has valid
access rights, check the modification times on
both access files. If one of them have change,
update the hash entry instead of creating a
new entry.
Steve Dickson [Fri, 19 Dec 2008 19:11:09 +0000 (14:11 -0500)]
Clients IP address and host names are check on
every RPC request, to both mountd and statd
when TCP wrappers are enabled. To help this
process scale better the access rights are stored
in a hash table, which are hashed per IP address,
RPC program and procudure numbers.
Steve Dickson [Fri, 19 Dec 2008 19:09:59 +0000 (14:09 -0500)]
When clients are define as IP addresses in /etc/hosts.deny,
access is allow due to misinterpreting the return value of
hosts_ctl(). This patch reworks that logic which closes
that hole.
Steve Dickson [Wed, 17 Dec 2008 21:41:35 +0000 (16:41 -0500)]
statd: not unlinking host files
Statd is not unlinking host files during SM_UNMON and
SM_UNMON_ALL calls because the given host is still on the run-time
notify list (rtnl) and the check flag is set when xunlink() is
called. But the next thing the caller of xunlink() does is
remove the host from the rtnl list which means the
unlink will never happen.
So this patch removes the check flag from xunlink() since
its not needed and correctly allocates and frees memory
used by xunlink().
Chuck Lever [Wed, 17 Dec 2008 19:42:14 +0000 (14:42 -0500)]
sm-notify command: fix a use-after-free bug
The recv_reply() function was referencing host->ai in a freeaddrinfo(3)
call after it had freed @host.
This is not likely to be harmful in a single-threaded user context,
but it's still bad form, and it will get called out if testing
sm-notify with poisoned free memory. The less noise, the better we
are able to see real problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Kevin Coffman [Thu, 11 Dec 2008 16:43:31 +0000 (11:43 -0500)]
svcgssd: use the actual context expiration for cache
Instead of sending down an infinite expiration value for the rsi(init) and
rsc(context) cache entries, use a reasonable value for the rsi cache, and
the actual context expiration value for the rsc cache.
Prompted by a proposal from Neil Brown as a result of a complaint of a
server running out of kernel memory when under heavy load of rpcsec_gss
traffic. Neil's original patch used one minute for the init cache and one
hour for the context cache. Using the actual expiration time prevents
unnecessary context re-negotiation.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
Kevin Coffman [Thu, 11 Dec 2008 16:39:38 +0000 (11:39 -0500)]
gssd/svcgssd: add support to retrieve actual context expiration
Add some plumbing so that the context expiration can be returned while
serializing the information. Later patch(es) will actually get the
expiration and pass it down to the kernel.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 11 Dec 2008 15:30:20 +0000 (10:30 -0500)]
mount command: AF_INET6 support for probe_bothports()
Introduce an AF_INET6 capable probe_bothports() API. This means replacing
"struct sockaddr_in *" arguments with a "struct sockaddr *" and a socklen_t
arguments.
These functions often combine a "struct sockaddr_in" and a "struct pmap" into
a single "clnt_addr_t" argument. Instead of modifying "clnt_addr_t" and all
the legacy code that uses it, I'm going to create a new probe_bothports() API
for the text-based mount command that takes a "struct sockaddr *" and
sockaddr length, and leave the existing probe_bothports() interface, which
takes "clnt_addr_t" arguments, for legacy use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
projects / nfs-utils.git / log