Chuck Lever [Thu, 28 Oct 2010 16:12:12 +0000 (12:12 -0400)]
nfs-utils: Remove all uses of AI_ADDRCONFIG
It was reported that, if only "lo" is up,
mount.nfs 127.0.0.1:/export /mount
fails with "Name or service not known".
"man 3 getaddrinfo" says this:
If hints.ai_flags includes the AI_ADDRCONFIG flag, then IPv4
addresses are returned in the list pointed to by res only if the
local system has at least one IPv4 address configured, and IPv6
addresses are only returned if the local system has at least
one IPv6 address configured.
The man page oversimplifies here. A review of glibc shows that
getaddrinfo(3) explicitly ignores loopback addresses when deciding
whether an IPv4 or IPv6 address is configured.
This behavior around loopback is a problem not just for mount.nfs,
but also for RPC daemons that have to start up before a system's
networking is fully configured and started. Given the history of
other problems with AI_ADDRCONFIG and the unpredictable behavior it
introduces, let's just remove it everywhere in nfs-utils.
Jeff Layton [Thu, 28 Oct 2010 13:18:33 +0000 (09:18 -0400)]
nfs-utils: fix default value for --enable-tirpc
We need $enable_tirpc to be a tristate. 'yes' means that someone
explicitly requested building with tirpc. 'no' means that it was
explicitly disabled. Anything else means that no one specified a value.
Fix it by setting the value to a blank string so that the default is
properly undefined.
Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 13 Oct 2010 17:57:52 +0000 (13:57 -0400)]
behavior as file systems that use the monolithic /sbin/mount command.
See the MS_NOMTAB macro in utils-linux-ng/mount/mount.c.
Note that mount(8) has MS_USERS and MS_USER in the "nomtab" category
as well, but mount.nfs needs to record those values so that unmounting
a user-mounted NFS file system can work.
While we're here, fix some white space damage in fix_opts_string().
Chuck Lever [Wed, 13 Oct 2010 17:55:10 +0000 (13:55 -0400)]
umount.nfs: Distinguish between nfs4 and nfs mounts
Neil Brown reports that umount.nfs is still confused by "-t nfs -o
vers=4" mounts.
/etc/mtab can be confused. /proc/mounts is authoritative on the
fstype of a mount. Have umount.nfs consult it to determine which
mechanism to use for unmounting. The code to read /proc/mounts was
lifted from the nfsstat command.
The code introduced by this patch may look like belt-n-suspenders, but
we have two use cases to consider:
1. Old kernels don't support the "vers=4" mount option, so
umount.nfs must look for the "nfs4" fstype
2. Upcoming kernels may eliminate support the "nfs4" fstype, so
umount.nfs must look for the "vers=4" mount option
Thus this logic checks for "nfs4" first then looks for the NFS version
setting.
Note that we could handle unmounting entirely in the kernel, but that
won't help older kernels that have this issue.
Chuck Lever [Wed, 13 Oct 2010 17:01:51 +0000 (13:01 -0400)]
mount.nfs: mountproto does not support RDMA
Clean up. Our client does not support the MNT protocol on RDMA.
nfs_mount_protocol() isn't invoked for RDMA mounts (they are shunted
off before nfs_options2pmap() is invoked). But in case it ever is,
it should return the expected response.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 13 Oct 2010 15:54:49 +0000 (11:54 -0400)]
mount.nfs: Eliminate compiler warnings in utils/mount/mount.c
Clean up.
mount.c: In function parse_opt:
mount.c:354: warning: conversion to size_t from int may change the
sign of the result
mount.c:354: warning: conversion to int from size_t may change the
sign of the result
mount.c:359: warning: conversion to size_t from int may change the
sign of the result
mount.c:359: warning: conversion to int from size_t may change the
sign of the result
mount.c: In function parse_opts:
mount.c:374: warning: conversion to int from size_t may change the
sign of the result
mount.c:377: warning: conversion to size_t from int may change the
sign of the result
Character string lengths are usually size_t anyway. We can easily
avoid the implicit type cast here.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 13 Oct 2010 15:50:57 +0000 (11:50 -0400)]
mount.nfs: Eliminate compiler warnings in utils/mount/version.h
Clean up.
In file included from mount.c:50:
version.h: In function linux_version_code:
version.h:48: warning: conversion to unsigned int from int may
change the sign of the result
version.h:48: warning: conversion to unsigned int from int may
change the sign of the result
version.h:48: warning: conversion to unsigned int from int may
change the sign of the result
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 13 Oct 2010 15:38:22 +0000 (11:38 -0400)]
mount.nfs: Eliminate compiler warnings
Clean up.
fstab.c: In function ?lock_mtab?:
fstab.c:385: warning: declaration of ?errsv? shadows a previous local
fstab.c:367: warning: shadowed declaration is here
fstab.c:407: warning: declaration of ?errsv? shadows a previous local
fstab.c:367: warning: shadowed declaration is here
fstab.c:417: warning: declaration of ?tries? shadows a previous local
fstab.c:325: warning: shadowed declaration is here
fstab.c:422: warning: declaration of ?errsv? shadows a previous local
fstab.c:367: warning: shadowed declaration is here
These are probably harmless. Reusing a variable name, however, is a
little confusing to follow when reading the code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 13 Oct 2010 15:22:07 +0000 (11:22 -0400)]
libnfs.a: Allow multiple RPC listeners to share listener port number
Normally, when "-p" is not specified on the mountd command line, the
TI-RPC library chooses random port numbers for each listener. If a
port number _is_ specified on the command line, all the listeners
will get the same port number, so SO_REUSEADDR needs to be set on
each socket.
Thus we can't let TI-RPC create the listener sockets for us in this
case; we must create them ourselves and then set SO_REUSEADDR (and
other socket options) by hand.
Different versions of the same RPC program have to share the same
listener and SVCXPRT, so we have to cache xprts we create, and re-use
them when additional requests for registration come from the
application.
Though it doesn't look like it, this fix was "copied" from the legacy
rpc_init() function. It's more complicated for TI-RPC, of course,
since a TI-RPC application can set up listeners with a nearly
arbitrary number of address families and socket types, not just the
two listeners that legacy RPC applications can set up (one for AF_INET
UDP and one for AF_INET TCP).
Steve Dickson [Wed, 13 Oct 2010 14:09:53 +0000 (10:09 -0400)]
nfs-utils: Move common code into support
There are several source files and headers present in the ./utils/idmapd
directory which are also usable in a doimapd daemon. Because of this we
move that support into the support directory such that it can be shared by
both daemons.
Signed-off-by: Jim Rees <rees@umich.edu> Signed-off-by: Steve Dickson <steved@redhat.com>
Allow the principal that is used to get the machines creds definable
on the command like with the new '-p <principal>'. This is useful
in cluster environments.
Signed-off-by: Eberhard Kuemmerle <E.Kuemmerle@fz-juelich.de> Signed-off-by: Steve Dickson <steved@redhat.com>
David Lecorfe [Mon, 27 Sep 2010 17:29:31 +0000 (13:29 -0400)]
nfs-iostat.py: don't wait for an extra interval when given a count
If I invoke the tool with an interval of 10 and a count of 2, it will:
- show the summary
- sleep 10s
- show the stats for the last 10s
- sleep 10s
- exit
Signed-off-by: David Lecorfe <dlecorfec@gmail.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 27 Sep 2010 14:14:34 +0000 (10:14 -0400)]
mountd: Update mountd/exportfs man pages to reflect IPv6 changes
Document IPv6 support in rpc.mountd and exportfs, and clarify existing
language in the man page.
Clean up: Use bold consistently for program names, and italics
consistently for file names. Use "rpc.mountd" consistently as the
name of the mountd daemon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 27 Sep 2010 14:13:39 +0000 (10:13 -0400)]
mountd: Use MNT status values instead of NFSERR
Clean up: The MNT protocol has its own enum type defining error
status values. While the values can be the same as the NFSERR enum
type on some systems, it's not guaranteed to be true everywhere.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Mon, 27 Sep 2010 14:11:18 +0000 (10:11 -0400)]
mountd: Fix up version and usage messages
Clean up: rpc.mountd is no longer known as kmountd. Use the program's
basename rather than the full pathname for the usage message. Display
a version message at start up similar to statd's.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Jeff Layton [Thu, 16 Sep 2010 18:34:39 +0000 (14:34 -0400)]
rpc.nfsd: mount up nfsdfs is it doesn't appear to be mounted yet
There's a bit of a chicken and egg problem when nfsd is run the first
time. On Fedora/RHEL at least, /proc/fs/nfsd is mounted up whenever nfsd
is plugged in via a modprobe.conf "install" directive.
If someone runs rpc.nfsd without plugging in nfsd.ko first,
/proc/fs/nfsd won't be mounted and rpc.nfsd will end up using the legacy
nfsctl interface. After that, nfsd will be plugged in and subsequent
rpc.nfsd invocations will use that instead.
This is a problem as some nfsd command-line options are ignored when the
legacy interface is used. It'll also be a problem for people who want
IPv6 enabled servers. The upshot is that we really don't want to use the
legacy interface unless there is no other option.
To avoid this situation, have rpc.nfsd check to see if the "threads"
file is already present. If it's not, then make an attempt to mount
/proc/fs/nfsd. This is a "best-effort" sort of thing, however so we
just ignore the return code from the mount attempt and fall back to
using nfsctl() if it fails.
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 16 Sep 2010 18:25:52 +0000 (14:25 -0400)]
libexport.a: Enable IPv6 support in hostname.c
If --enable-ipv6 is specified when building nfs-utils, libexport's
host_foo() helpers can now return both IPv4 and IPv6 addresses.
This means IPv6 presentation addresses and IPv6 DNS resolution
results are handled properly in the mountd cache and /etc/exports,
but does not yet enable IPv6 mountd listeners.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 16 Sep 2010 18:19:19 +0000 (14:19 -0400)]
mountd: clean up cache API
Clean up: Squelch compiler warnings and document public parts of
cache API.
cache.c: At top level:
cache.c:67: warning: no previous prototype for auth_unix_ip
cache.c:123: warning: no previous prototype for auth_unix_gid
cache.c:217: warning: no previous prototype for get_uuid
cache.c:247: warning: no previous prototype for uuid_by_path
cache.c:326: warning: no previous prototype for nfsd_fh
cache.c:745: warning: no previous prototype for nfsd_export
cache.c:820: warning: no previous prototype for cache_open
cache.c:832: warning: no previous prototype for cache_set_fd
cache.c:841: warning: no previous prototype for
cache_process_req
cache.c:921: warning: no previous prototype for cache_export
cache.c:953: warning: no previous prototype for
cache_get_filehandle
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 16 Sep 2010 17:44:02 +0000 (13:44 -0400)]
mountd: Support IPv6 in mountd's svc routines
Replace IPv4-specific code with use of our generic hostname helpers
in the routines that handle incoming MNT RPC requests.
These functions will support IPv6 without additional changes, once
IPv6 is enabled in the generic hostname helpers.
As part of this update, I've modified all of mountd's _svc routines
to use a debug message format that is consistent with statd. It may
be overkill for some of these; if so we can pull them out later.
Chuck Lever [Thu, 16 Sep 2010 13:32:52 +0000 (09:32 -0400)]
libnfs.a: Fix API for getfh() & friends
This is more of a clean-up than a behavioral change.
POSIX requires that a "struct sockaddr" is the same size as a "struct
sockaddr_in". Therefore, a variable or field of type "struct sockaddr"
cannot contain an AF_INET6 address. However, "struct sockaddr *" is
often used to reference a generic (ie non-address family specific)
socket address, generating some confusion about this.
The nfsctl_arg struct uses a struct sockaddr (not a pointer) to pass
the client's IP address to the kernel. This means the legacy nfsctl()
kernel API can never support IPv6. Fortunately for us, this legacy
interface was replaced by a text-based cache interface a few years
back. We don't need to support non-AF_INET addresses here.
The getfh() functions in nfs-utils provide a handy C API for the
kernel's nfsctl interface. The getfh() functions still take a struct
sockaddr *, though, and that can imply that a non-IPv4 address can be
passed via this API. To make it abundantly clear that only IPv4
addresses can be used with this interface, change the synopses of
getfh() and friends to take a struct sockaddr_in * instead of a struct
sockaddr * .
This makes these functions conform with other places in mountd and
exportfs that already grok the difference between a struct sockaddr
and a struct sockaddr_in.
While we're here...
Introduce some nice documenting comments for the get_fh() functions,
and...
Since mountd will support IPv6 in the near future, assert that the
family of client addresses passed to this API is indeed AF_INET, in
order to prevent non-AF_INET addresses from ever being passed to the
legacy nfsctl() interface.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 16 Sep 2010 11:26:07 +0000 (07:26 -0400)]
mount.nfs: Refactor mount version and protocol autonegotiation
Clean up.
I'm beginning to agree with Bruce and Steve's assessment that the
fallthrough switch case in nfs_try_mount() is more difficult to read
and understand than it needs to be. The logic that manages
negotiating NFS version and protocol settings is getting more complex
over time anyway.
So let's split the autonegotiation piece out of nfs_try_mount().
We can reduce indenting, and use cleaner switch-based logic. Also,
adding more comments can only help.
Neil also suggested replacing the pre-call "errno = 0" trick. The
lower-level functions may try to mount several times (given a list of
addresses to try). errno could be set by any of those. The mount
request will succeed at some point, and "success" is returned, but
errno is still set to some non-zero value.
The kernel version check in nfs_try_mount() is more or less loop
invariant: it's impossible for the result of that test to change
between retries. So we should be able to safely move it to the logic
that sets the initial value of mi->version.
This patch is not supposed to cause a behavioral change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 8 Sep 2010 17:28:24 +0000 (13:28 -0400)]
mount.nfs: Prepare way for "vers=4,rdma" mounts
At some point, when the kernel starts to support "vers=4,rdma" mounts,
we will want the mount.nfs command to pass "vers=4,rdma" mounts
instead of rejecting them.
Assuming that the kernel will reject these today with EPROTONOSUPPORT,
that would cause the version fallback logic to go to "vers=3,rdma"
automatically. So the extra check we have now is not needed anyway.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 8 Sep 2010 17:27:31 +0000 (13:27 -0400)]
mount.nfs: Support an "rdma" mount option
The kernel NFS client's mount option parser recognizes a stand-alone
"rdma" mount option, similar to the legacy "udp" and "tcp" options.
The mount.nfs command text-based mount option parser used to pass
"rdma" straight to the kernel, but since we've started handling MNT in
the kernel instead of in user space, "rdma" on the command line has
not worked.
Until now, no-one has noticed, especially since an "rdma" mount option
isn't documented in nfs(5).
Support "rdma" in mount.nfs command, and document it in nfs(5).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Wed, 8 Sep 2010 17:25:56 +0000 (13:25 -0400)]
getport: Recognize "rdma" and "rdma6" netid
The mount.nfs command must recognize the values of "rdma" and "rdma6"
with the "proto=" mount option. Typically the mount.nfs command
relies on libtirpc or getprotobyname(3) to recognize netids and
translate them to protocol numbers.
RFCs 5665 and 5666 define the "rdma" and "rdma6" netids. IANA defines
a specific port number for NFS over RDMA (20049), but has not provided
a protocol name and number for RDMA transports, and is not expected
to. The best we can do is translate these by hand, as needed, to get
RDMA mount requests to the kernel without erroring out.
Only the forward translation is needed until such time that "rdma" and
"rdma6" start to appear in rpcbind registries. For now, the version
and transport negotiation logic is skipped, avoiding rpcbind queries
for RDMA mounts.
Note: As of kernel 2.6.36, the kernel's NFS over RDMA transport
capability does not support IPv6.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Thu, 9 Sep 2010 14:27:17 +0000 (10:27 -0400)]
libexport.a: Refactor init_netmask()
Instead of a single function that can handle both AF_INET and AF_INET6
addresses, two separate functions might be cleaner.
The original plan was to keep code redundancy at a minimum, but the
resulting code was cumbersome at best. I think I've traded a little
extra code for something that will be much easier to read, understand,
and maintain.
I've also eliminated the "#if / #endif" instances inside the functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 31 Aug 2010 19:30:14 +0000 (15:30 -0400)]
libexport.a: IPv6 support for client_init_subnet()
To parse and store an IPv6 host or subnet address, init_netmask()
needs to handle 128 bit subnet masks.
Unfortunately what once was a pretty simple little function has grown
much larger. This logic must now not only parse IPv6 addresses
correctly, but must also distinguish between IPv4 and IPv6.
To avoid code duplication, I'm "bending" the cardinal rule of not
using "#ifdef" inside functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 31 Aug 2010 19:29:02 +0000 (15:29 -0400)]
libexport.a: Prepare init_subnetwork() for IPv6 support
Retire the slash32 logic in inet_netmask() in favor of a more generic
netmask parser that can support IPv6 addresses.
If an invalid IP address string is given to inet_addr(3), it returns
INADDR_NONE, which is actually a "valid" address (255.255.255.255).
We're none the wiser to the substitution until something breaks later.
This patch provides better sanity checking of the parsed address, now
that such an error can be reported to client_init()'s callers.
We can also check the prefixlen value a little more carefully as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 31 Aug 2010 19:27:19 +0000 (15:27 -0400)]
libexport.a: Use host helper to parse address in client_init()
Take the first step towards making it possible to parse either IPv4 or
IPv6 addresses in client_init(). It won't handle IPv6 until
host_pton() has IPv6 support enabled, and it still doesn't deal with
IPv6 netmasks yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 31 Aug 2010 19:25:35 +0000 (15:25 -0400)]
libexport.a: Prepare to recognize IPv6 addresses in client_gettype()
The current open-coded parsing logic in client_gettype() will be hard
to modify to recognize IPv6 addresses. Use a more generic mechanism
for detecting IP presentation addresses.
IPv6 will be enabled automatically in client_gettype() when host_pton()
is changed to support IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 24 Aug 2010 11:19:34 +0000 (07:19 -0400)]
exportfs: Use xlog() for error reporting
exportfs already invokes xlog_open() because libexport.a uses xlog()
exclusively for error reporting and debugging messages. If we can
use xlog() throughout exportfs itself, that enables xlog debugging
messages everywhere in the code path.
In addition, use xlog() instead of fprintf(stderr) for reporting
errors in exportfs.c, to be consistent with libexport.a and other
components of nfs-utils.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 24 Aug 2010 11:16:10 +0000 (07:16 -0400)]
statd: statd fails to monitor if no reverse mapping of mon_name exists
Commit 8ce130c4 switched in the new statd_canonical_name() function
that constructs a "unique" name statd can use to uniquely identify a
monitor record.
The legacy statd would monitor a client that sent an IP address with
no reverse map as its caller_name. To remain bug-for-bug compatible,
allow this case in the new statd.
This shouldn't be a problem: statd_canonical_name() needs to create
a unique name for the monitored host so it can keep track of monitor
requests from the same remote. The IP address itself should work as
well as the host's canonical name, in case there is no reverse
mapping.
We still enforce the requirement that a mon_name that is a DNS name
must have a forward map to an IP address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steve Dickson <steved@redhat.com>
Chuck Lever [Tue, 24 Aug 2010 11:13:54 +0000 (07:13 -0400)]
libexport: Fix IP address check in check_netgroup()
Neil Brown reports that recent changes to replace
gethostby{addr,name}(3) with get{addr,info}name(3) may have
inadvertently broken netgroup support.
There used to be a gethostbyaddr(3) call in the third paragraph in
check_netgroup(). The reason for that gethostbyaddr(3) call was that
the first innetgr(3) call has already confirmed that hname is not a
member of the netgroup. We also need to confirm that, if hname
happens to be an IP address, the hostname bound to that IP address is
not a member of the netgroup, either.
Fix this by restoring appropriate address to hostname mapping of hname
before retrying the innetgr(3) call.
Steve Dickson [Wed, 4 Aug 2010 14:41:18 +0000 (10:41 -0400)]
Removed warnings from idmapd.c
idmapd.c:120: warning: missing initializer
idmapd.c:120: warning: (near initialization for 'nfsd_ic[0].ic_event')
idmapd.c:121: warning: missing initializer
idmapd.c:121: warning: (near initialization for 'nfsd_ic[1].ic_event')
idmapd.c: In function 'flush_nfsd_cache':
idmapd.c:173: warning: comparison between signed and unsigned integer expressions
idmapd.c: In function 'dirscancb':
idmapd.c:384: warning: unused parameter 'fd'
idmapd.c:384: warning: unused parameter 'which'
idmapd.c: In function 'svrreopen':
idmapd.c:468: warning: unused parameter 'fd'
idmapd.c:468: warning: unused parameter 'which'
idmapd.c:468: warning: unused parameter 'data'
idmapd.c: In function 'clntscancb':
idmapd.c:474: warning: unused parameter 'fd'
idmapd.c:474: warning: unused parameter 'which'
idmapd.c: In function 'nfsdcb':
idmapd.c:488: warning: unused parameter 'fd'
idmapd.c: In function 'nfscb':
idmapd.c:663: warning: unused parameter 'fd'
idmapd.c: In function 'validateascii':
idmapd.c:850: warning: comparison between signed and unsigned integer expressions
idmapd.c:858: warning: comparison between signed and unsigned integer expressions
idmapd.c: In function 'getfield':
idmapd.c:916: warning: comparison between signed and unsigned integer expressions
Steve Dickson [Wed, 4 Aug 2010 14:26:13 +0000 (10:26 -0400)]
Removed warnings from svcgssd_proc.c
svcgssd_proc.c: In function 'send_response':
svcgssd_proc.c:135: warning: unused parameter 'f'
svcgssd_proc.c: In function 'handle_nullreq':
svcgssd_proc.c:434: warning: comparison of unsigned expression < 0 is always false
Steve Dickson [Tue, 20 Jul 2010 22:13:45 +0000 (18:13 -0400)]
Removed warnings from gssd_proc.c
gssd_proc.c: In function 'create_auth_rpc_client':
gssd_proc.c:939: warning: comparison between signed and unsigned integer expressions
gssd_proc.c:939: warning: comparison between signed and unsigned integer expressions
gssd_proc.c: In function 'handle_krb5_upcall':
gssd_proc.c:1164: warning: comparison between signed and unsigned integer expressions
gssd_proc.c: In function 'handle_spkm3_upcall':
gssd_proc.c:1178: warning: comparison between signed and unsigned integer expressions
Steve Dickson [Tue, 20 Jul 2010 22:08:13 +0000 (18:08 -0400)]
Removed warnings from krb5_util.c
krb5_util.c: In function 'realm_and_service_match':
krb5_util.c:617: warning: unused parameter 'context'
krb5_util.c: In function 'limit_krb5_enctypes':
krb5_util.c:1275: warning: unused parameter 'uid'
Steve Dickson [Mon, 19 Jul 2010 18:54:51 +0000 (14:54 -0400)]
Removed warnings from nfsstat.c
nfsstat.c: In function 'print_callstats':
nfsstat.c:797: warning: comparison between signed and unsigned integer
expressions
nfsstat.c:801: warning: comparison between signed and unsigned integer
expressions
nfsstat.c:802: warning: comparison between signed and unsigned integer
expressions
nfsstat.c:805: warning: comparison between signed and unsigned integer
expressions
nfsstat.c: In function 'print_callstats_list':
nfsstat.c:821: warning: comparison between signed and unsigned integer
expressions
nfsstat.c:828: warning: comparison between signed and unsigned integer
expressions
nfsstat.c: In function 'unpause':
nfsstat.c:1111: warning: unused parameter 'sig' Signed-off-by: Steve Dickson <steved@redhat.com>
Steve Dickson [Mon, 19 Jul 2010 18:48:37 +0000 (14:48 -0400)]
Removed warnings from nfssvc.c
nfssvc.c:184: warning: comparison between signed and unsigned integer expressions
nfssvc.c: In function 'nfssvc_setvers':
nfssvc.c:254: warning: comparison between signed and unsigned integer expressions
nfssvc.c: In function 'nfssvc_threads':
nfssvc.c:280: warning: comparison between signed and unsigned integer expressions
Steve Dickson [Mon, 19 Jul 2010 16:17:24 +0000 (12:17 -0400)]
Removed warnings from rpcdispatch.c
rpcdispatch.c: In function 'rpc_dispatch':
rpcdispatch.c:30: warning: comparison between signed and unsigned
integer expressions
rpcdispatch.c:35: warning: comparison between signed and unsigned
integer expressions
Doug Nazar [Mon, 19 Jul 2010 15:08:46 +0000 (11:08 -0400)]
gssd: picking wrong creds
When not using machine credentials for root, if the machine
credential cache file is newer than the root credential file
the wrong file will get picked. Ignore the machine file in
this case.
projects / nfs-utils.git / log