X-Git-Url: https://git.decadent.org.uk/gitweb/?p=nfs-utils.git;a=blobdiff_plain;f=tests%2FMakefile.in;h=1deff85ea6c7089912e0a04608b850a79135416d;hp=411723368acc3b53fcb0f6acbadb2fd9b36bb680;hb=e0b66eaad419b466ecfac1b82d4802bb5fb676d0;hpb=706bfd7c94d48659a1411fdef2a3a61d4719f1aa diff --git a/tests/Makefile.in b/tests/Makefile.in index 4117233..1deff85 100644 --- a/tests/Makefile.in +++ b/tests/Makefile.in @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,6 +14,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -35,16 +51,19 @@ build_triplet = @build@ host_triplet = @host@ check_PROGRAMS = statdb_dump$(EXEEXT) subdir = tests -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/aclocal/bsdsignals.m4 \ $(top_srcdir)/aclocal/ipv6.m4 \ $(top_srcdir)/aclocal/kerberos5.m4 \ + $(top_srcdir)/aclocal/keyutils.m4 \ $(top_srcdir)/aclocal/libblkid.m4 \ $(top_srcdir)/aclocal/libcap.m4 \ $(top_srcdir)/aclocal/libevent.m4 \ $(top_srcdir)/aclocal/libnfsidmap.m4 \ $(top_srcdir)/aclocal/librpcsecgss.m4 \ + $(top_srcdir)/aclocal/libsqlite3.m4 \ $(top_srcdir)/aclocal/libtirpc.m4 \ $(top_srcdir)/aclocal/libtool.m4 \ $(top_srcdir)/aclocal/ltoptions.m4 \ @@ -88,6 +107,11 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -95,8 +119,10 @@ AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ distdir ETAGS = etags CTAGS = ctags -am__tty_colors = \ -red=; grn=; lgn=; blu=; std= +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = $(am__tty_colors_dummy) DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ @@ -151,6 +177,7 @@ CXXFLAGS_FOR_BUILD = @CXXFLAGS_FOR_BUILD@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -160,9 +187,13 @@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GREP = @GREP@ +GSSAPI_CFLAGS = @GSSAPI_CFLAGS@ +GSSAPI_LIBS = @GSSAPI_LIBS@ GSSD = @GSSD@ GSSGLUE_CFLAGS = @GSSGLUE_CFLAGS@ GSSGLUE_LIBS = @GSSGLUE_LIBS@ +GSSKRB_CFLAGS = @GSSKRB_CFLAGS@ +GSSKRB_LIBS = @GSSKRB_LIBS@ HAVE_LIBWRAP = @HAVE_LIBWRAP@ HAVE_TCP_WRAPPER = @HAVE_TCP_WRAPPER@ IDMAPD = @IDMAPD@ @@ -183,10 +214,17 @@ LIBBLKID = @LIBBLKID@ LIBBSD = @LIBBSD@ LIBCAP = @LIBCAP@ LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBEVENT = @LIBEVENT@ +LIBKEYUTILS = @LIBKEYUTILS@ +LIBMOUNT = @LIBMOUNT@ +LIBNFSIDMAP = @LIBNFSIDMAP@ LIBNSL = @LIBNSL@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBSOCKET = @LIBSOCKET@ +LIBSQLITE = @LIBSQLITE@ +LIBTIRPC = @LIBTIRPC@ LIBTOOL = @LIBTOOL@ LIBWRAP = @LIBWRAP@ LIPO = @LIPO@ @@ -194,6 +232,7 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -210,6 +249,8 @@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ RANLIB = @RANLIB@ RELEASE = @RELEASE@ RPCGEN_PATH = @RPCGEN_PATH@ @@ -225,6 +266,7 @@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -247,7 +289,6 @@ dvidir = @dvidir@ enable_gss = @enable_gss@ enable_ipv6 = @enable_ipv6@ enable_mountconfig = @enable_mountconfig@ -enable_nfsv3 = @enable_nfsv3@ enable_nfsv4 = @enable_nfsv4@ enable_nfsv41 = @enable_nfsv41@ exec_prefix = @exec_prefix@ @@ -265,7 +306,6 @@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ mountfile = @mountfile@ @@ -278,6 +318,7 @@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ startstatd = @startstatd@ +statdpath = @statdpath@ statduser = @statduser@ statedir = @statedir@ sysconfdir = @sysconfdir@ @@ -335,7 +376,7 @@ clean-checkPROGRAMS: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list -statdb_dump$(EXEEXT): $(statdb_dump_OBJECTS) $(statdb_dump_DEPENDENCIES) +statdb_dump$(EXEEXT): $(statdb_dump_OBJECTS) $(statdb_dump_DEPENDENCIES) $(EXTRA_statdb_dump_DEPENDENCIES) @rm -f statdb_dump$(EXEEXT) $(LINK) $(statdb_dump_OBJECTS) $(statdb_dump_LDADD) $(LIBS) @@ -375,12 +416,12 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ @@ -390,7 +431,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -404,37 +449,6 @@ $(RECURSIVE_TARGETS): if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ @@ -443,6 +457,10 @@ ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ + done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -506,6 +524,20 @@ GTAGS: && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -519,7 +551,7 @@ check-TESTS: $(TESTS) if test -f ./$$tst; then dir=./; \ elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \ all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$tst[\ \ ]*) \ @@ -590,14 +622,15 @@ check-TESTS: $(TESTS) fi; \ dashes=`echo "$$dashes" | sed s/./=/g`; \ if test "$$failed" -eq 0; then \ - echo "$$grn$$dashes"; \ + col="$$grn"; \ else \ - echo "$$red$$dashes"; \ + col="$$red"; \ fi; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes$$std"; \ + echo "$${col}$$dashes$${std}"; \ + echo "$${col}$$banner$${std}"; \ + test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \ + test -z "$$report" || echo "$${col}$$report$${std}"; \ + echo "$${col}$$dashes$${std}"; \ test "$$failed" -eq 0; \ else :; fi @@ -633,13 +666,10 @@ distdir: $(DISTFILES) done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ @@ -676,10 +706,15 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: @@ -764,22 +799,24 @@ ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \ - ctags-recursive install-am install-strip tags-recursive + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-TESTS check-am clean \ - clean-checkPROGRAMS clean-generic clean-libtool ctags \ - ctags-recursive distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am + clean-checkPROGRAMS clean-generic clean-libtool cscopelist \ + cscopelist-recursive ctags ctags-recursive distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables.