-.TH EXPORTS 5 "28 October 1999"
-.UC 5
+.TH EXPORTS 5 "4 March 2005" "Linux" "Linux File Formats Manual"
.SH NAME
exports \- NFS file systems being exported (for Kernel based NFS)
.SH SYNOPSIS
the export name using a backslash followed by the character code as three
octal digits.
.PP
+To apply changes to this file, run exportfs -ra or /etc/init.d/nfs-kernel-server
+reload (the latter being a distribution-specific extension).
+.PP
.SS Machine Name Formats
NFS clients may be specified in a number of ways:
.IP "single host
.IP "wildcards
Machine names may contain the wildcard characters \fI*\fR and \fI?\fR.
This can be used to make the \fIexports\fR file more compact; for instance,
-\fI*.cs.foo.edu\fR matches all hosts in the domain \fIcs.foo.edu\fR. However,
-these wildcard characters do not match the dots in a domain name, so the
-above pattern does not include hosts such as \fIa.b.cs.foo.edu\fR.
+\fI*.cs.foo.edu\fR matches all hosts in the domain
+\fIcs.foo.edu\fR. As these characters also match the dots in a domain
+name, the given pattern will also match all hosts within any subdomain
+of \fIcs.foo.edu\fR.
.IP "IP networks
You can also export directories to all hosts on an IP (sub-) network
simultaneously. This is done by specifying an IP address and netmask pair
to the network base address result in identical subnetworks with 10 bits of
host). Wildcard characters generally do not work on IP addresses, though they
may work by accident when reverse DNS lookups fail.
-.TP
+'''.TP
'''.B =public
'''This is a special ``hostname'' that identifies the given directory name
'''as the public root directory (see the section on WebNFS in
'''.B \-\-public\-root
'''option. Multiple specifications of a public root will be ignored.
.PP
+.SS RPCSEC_GSS security
+To restrict access to an export using rpcsec_gss security, use the special
+string "gss/krb5" as the client. It is not possible to simultaneously require
+rpcsec_gss and to make requirements on the IP address of the client.
+.PP
.SS General Options
.IR exportfs
understands the following export options:
This can also be made explicit by using
the
.IR ro " option.
+.TP
+.IR async
+This option allows the NFS server to violate the NFS protocol and
+reply to requests before any changes made by that request have been
+committed to stable storage (e.g. disc drive).
+
+Using this option usually improves performance, but at the cost that
+an unclean server restart (i.e. a crash) can cause data to be lost or
+corrupted.
+
.TP
.IR sync
-This option requests that all file writes be committed to disc before
-the write request completes. This is required for complete safety of
-data in the face of a server crash, but incurs a performance hit.
-The default is to allow the server to write the data out whenever it
-is ready. This can be explicitly requested with the
-.IR async " option.
+Reply to requests only after the changes have been committed to stable
+storage (see
+.IR async
+above).
+
+In releases of nfs-utils upto and including 1.0.0, this option was the
+default. In this and future releases,
+.I sync
+is the default, and
+.I async
+must be explicit requested if needed.
+To help make system adminstrators aware of this change, 'exportfs'
+will issue a warning if neither
+.I sync
+nor
+.I async
+is specified.
.TP
.IR no_wdelay
-This option only has effect if
-.I sync
+This option has no effect if
+.I async
is also set. The NFS server will normally delay committing a write request
to disc slightly if it suspects that another related write request may be in
progress or may arrive soon. This allows multiple write requests to
The option can be explicitly disabled with
.IR hide .
.TP
+.IR crossmnt
+This option is similar to
+.I nohide
+but it makes it possible for clients to move from the filesystem marked
+with crossmnt to exported filesystems mounted on it. Thus when a child
+filesystem "B" is mounted on a parent "A", setting crossmnt on "A" has
+the same effect as setting "nohide" on B.
+.TP
.IR no_subtree_check
This option disables subtree checking, which has mild security
-implications, but can improve reliability is some circumstances.
+implications, but can improve reliability in some circumstances.
If a subdirectory of a filesystem is exported, but the whole
filesystem isn't then whenever a NFS request arrives, the server must
directories to which only root has access can only be accessed if the
filesystem is exported with
.I no_root_squash
-(see below), even the file itself allows more general access.
+(see below), even if the file itself allows more general access.
As a general guide, a home directory filesystem, which is normally
exported at the root and may see lots of file renames, should be
.IR auth_nlm ,
or
.IR secure_locks .
+.TP
+.IR no_acl
+On some specially patched kernels, and when exporting filesystems that
+support ACLs, this option tells nfsd not to reveal ACLs to clients, so
+they will see only a subset of actual permissions on the given file
+system. This option is safe for filesystems used by NFSv2 clients and
+old NFSv3 clients that perform access decisions locally. Current
+NFSv3 clients use the ACCESS RPC to perform all access decisions on
+the server. Note that the
+.I no_acl
+option only has effect on kernels specially patched to support it, and
+when exporting filesystems with ACL support. The default is to export
+with ACL support (i.e. by default,
+.I no_acl
+is off).
'''.TP
'''.I noaccess
'''.TP
'''.IR link_absolute
'''Leave all symbolic link as they are. This is the default operation.
+
+.TP
+.IR mountpoint= path
+.TP
+.I mp
+This option makes it possible to only export a directory if it has
+successfully been mounted.
+If no path is given (e.g.
+.IR mountpoint " or " mp )
+then the export point must also be a mount point. If it isn't then
+the export point is not exported. This allows you to be sure that the
+directory underneath a mountpoint will never be exported by accident
+if, for example, the filesystem failed to mount due to a disc error.
+
+If a path is given (e.g.
+.IR mountpoint= "/path or " mp= /path)
+then the nominted path must be a mountpoint for the exportpoint to be
+exported.
+
+.TP
+.IR fsid= num
+This option forces the filesystem identification portion of the file
+handle and file attributes used on the wire to be
+.I num
+instead of a number derived from the major and minor number of the
+block device on which the filesystem is mounted. Any 32 bit number
+can be used, but it must be unique amongst all the exported filesystems.
+
+This can be useful for NFS failover, to ensure that both servers of
+the failover pair use the same NFS file handles for the shared filesystem
+thus avoiding stale file handles after failover.
+
+Some Linux filesystems are not mounted on a block device; exporting
+these via NFS requires the use of the
+.I fsid
+option (although that may still not be enough).
+
+The value 0 has a special meaning when use with NFSv4. NFSv4 has a
+concept of a root of the overall exported filesystem. The export point
+exported with fsid=0 will be used as this root.
+
.SS User ID Mapping
.PP
.I nfsd
'''in the password file at startup time. If it isn't found, a uid and gid
.I exportfs
chooses a uid and gid
-of -2 (i.e. 65534) for squashed access. These values can also be overridden by
+of 65534 for squashed access. These values can also be overridden by
the
.IR anonuid " and " anongid
options.
.TP
.IR root_squash
Map requests from uid/gid 0 to the anonymous uid/gid. Note that this does
-not apply to any other uids that might be equally sensitive, such as user
-.IR bin .
+not apply to any other uids or gids that might be equally sensitive, such as
+user
+.IR bin
+or group
+.IR staff .
.TP
.IR no_root_squash
Turn off root squashing. This option is mainly useful for diskless clients.
'''entry.
.SH FILES
/etc/exports
+.SH SEE ALSO
+.BR exportfs (8),
+.BR netgroup (5),
+.BR mountd (8),
+.BR nfsd (8),
+.BR showmount (8).
'''.SH DIAGNOSTICS
'''An error parsing the file is reported using syslogd(8) as level NOTICE from
'''a DAEMON whenever nfsd(8) or mountd(8) is started up. Any unknown
projects / nfs-utils.git / blobdiff