-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
@CONFIG_NFSV4_TRUE@am__append_1 = idmapd
-@CONFIG_GSS_TRUE@am__append_2 = gssd
-@CONFIG_MOUNT_TRUE@am__append_3 = mount
+@CONFIG_NFSIDMAP_TRUE@@CONFIG_NFSV4_TRUE@am__append_2 = nfsidmap
+@CONFIG_NFSV41_TRUE@am__append_3 = blkmapd
+@CONFIG_GSS_TRUE@am__append_4 = gssd
+@CONFIG_MOUNT_TRUE@am__append_5 = mount
+@CONFIG_NFSDCLTRACK_TRUE@am__append_6 = nfsdcltrack
subdir = utils
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/aclocal/bsdsignals.m4 \
$(top_srcdir)/aclocal/ipv6.m4 \
$(top_srcdir)/aclocal/kerberos5.m4 \
+ $(top_srcdir)/aclocal/keyutils.m4 \
$(top_srcdir)/aclocal/libblkid.m4 \
$(top_srcdir)/aclocal/libcap.m4 \
$(top_srcdir)/aclocal/libevent.m4 \
$(top_srcdir)/aclocal/libnfsidmap.m4 \
$(top_srcdir)/aclocal/librpcsecgss.m4 \
+ $(top_srcdir)/aclocal/libsqlite3.m4 \
$(top_srcdir)/aclocal/libtirpc.m4 \
$(top_srcdir)/aclocal/libtool.m4 \
$(top_srcdir)/aclocal/ltoptions.m4 \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
distdir
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = exportfs mountd nfsd nfsstat showmount statd idmapd \
- gssd mount
+DIST_SUBDIRS = exportfs mountd nfsd nfsstat showmount statd osd_login \
+ idmapd nfsidmap blkmapd gssd mount nfsdcltrack
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
+GSSAPI_CFLAGS = @GSSAPI_CFLAGS@
+GSSAPI_LIBS = @GSSAPI_LIBS@
GSSD = @GSSD@
GSSGLUE_CFLAGS = @GSSGLUE_CFLAGS@
GSSGLUE_LIBS = @GSSGLUE_LIBS@
+GSSKRB_CFLAGS = @GSSKRB_CFLAGS@
+GSSKRB_LIBS = @GSSKRB_LIBS@
HAVE_LIBWRAP = @HAVE_LIBWRAP@
HAVE_TCP_WRAPPER = @HAVE_TCP_WRAPPER@
IDMAPD = @IDMAPD@
LIBBSD = @LIBBSD@
LIBCAP = @LIBCAP@
LIBCRYPT = @LIBCRYPT@
+LIBDL = @LIBDL@
+LIBEVENT = @LIBEVENT@
+LIBKEYUTILS = @LIBKEYUTILS@
+LIBMOUNT = @LIBMOUNT@
+LIBNFSIDMAP = @LIBNFSIDMAP@
LIBNSL = @LIBNSL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSOCKET = @LIBSOCKET@
+LIBSQLITE = @LIBSQLITE@
+LIBTIRPC = @LIBTIRPC@
LIBTOOL = @LIBTOOL@
LIBWRAP = @LIBWRAP@
LIPO = @LIPO@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
RELEASE = @RELEASE@
RPCGEN_PATH = @RPCGEN_PATH@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
enable_gss = @enable_gss@
enable_ipv6 = @enable_ipv6@
enable_mountconfig = @enable_mountconfig@
-enable_nfsv3 = @enable_nfsv3@
enable_nfsv4 = @enable_nfsv4@
enable_nfsv41 = @enable_nfsv41@
exec_prefix = @exec_prefix@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
mountfile = @mountfile@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
startstatd = @startstatd@
+statdpath = @statdpath@
statduser = @statduser@
statedir = @statedir@
sysconfdir = @sysconfdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-OPTDIRS = $(am__append_1) $(am__append_2) $(am__append_3)
+OPTDIRS = $(am__append_1) $(am__append_2) $(am__append_3) \
+ $(am__append_4) $(am__append_5) $(am__append_6)
SUBDIRS = \
exportfs \
mountd \
nfsstat \
showmount \
statd \
+ osd_login \
$(OPTDIRS)
MAINTAINERCLEANFILES = Makefile.in
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
uninstall-am:
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-strip tags-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
+ cscopelist cscopelist-recursive ctags ctags-recursive \
+ distclean distclean-generic distclean-libtool distclean-tags \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
projects / nfs-utils.git / blobdiff