From: neilbrown Date: Tue, 20 Dec 2005 05:26:17 +0000 (+0000) Subject: Add some missing files needed for ./configure;make X-Git-Tag: nfs-utils-1-0-8-rc2~3 X-Git-Url: https://git.decadent.org.uk/gitweb/?a=commitdiff_plain;h=4d6bae8685f03723421f8d60f22bcc8907171b54;p=nfs-utils.git Add some missing files needed for ./configure;make --- diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..b42a17a --- /dev/null +++ b/INSTALL @@ -0,0 +1,182 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. diff --git a/compile b/compile new file mode 100755 index 0000000..1b1d232 --- /dev/null +++ b/compile @@ -0,0 +1,142 @@ +#! /bin/sh +# Wrapper for compilers which do not understand `-c -o'. + +scriptversion=2005-05-14.22 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; +esac + +ofile= +cfile= +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/depcomp b/depcomp new file mode 100755 index 0000000..04701da --- /dev/null +++ b/depcomp @@ -0,0 +1,530 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2005-07-09.11 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/ltmain.sh b/ltmain.sh new file mode 100644 index 0000000..db4982d --- /dev/null +++ b/ltmain.sh @@ -0,0 +1,6538 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION="1.5.20 Debian 1.5.20-2" +TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)" + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes. +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` + if test "X$win32_nmres" = "Ximport" ; then + win32_libid_type="x86 archive import" + else + win32_libid_type="x86 archive static" + fi + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE + fi +} + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xdir="$my_gentop/$my_xlib" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$my_xdir"; then + exit $status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2005 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $? + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $? + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit $? + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) prevopt="--tag" prev=tag ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE +fi + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; + + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + fi + build_libtool_libs=no + build_old_libs=yes + prefer_static_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit $EXIT_FAILURE + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + darwin_framework) + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework|-arch) + prev=darwin_framework + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit $EXIT_FAILURE + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + -model) + compile_command="$compile_command $arg" + compiler_flags="$compiler_flags $arg" + finalize_command="$finalize_command $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*) + + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + if test "$with_gcc" = "yes" ; then + compiler_flags="$compiler_flags $arg" + fi + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test "$status" -ne 0 && test ! -d "$output_objdir"; then + exit $status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $absdir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5* ) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit $EXIT_FAILURE + else + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix | nonstopux) + major=`expr $current - $age + 1` + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo + if test "X$deplibs_check_method" = "Xnone"; then + $echo "*** Warning: inter-library dependencies are not supported in this platform." + else + $echo "*** Warning: inter-library dependencies are not known to be supported." + fi + $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$echo "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadable object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +" + + case $host in + *cygwin* | *mingw* ) + $echo >> "$output_objdir/$dlsyms" "\ +/* DATA imports from DLLs on WIN32 can't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs */ +struct { +" + ;; + * ) + $echo >> "$output_objdir/$dlsyms" "\ +const struct { +" + ;; + esac + + + $echo >> "$output_objdir/$dlsyms" "\ + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + cwrappersource=`$echo ${objdir}/lt-${outputname}.c` + cwrapper=`$echo ${output}.exe` + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource <> $cwrappersource<<"EOF" +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +#define DIR_SEPARATOR '/' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +#define HAVE_DOS_BASED_FILE_SYSTEM +#ifndef DIR_SEPARATOR_2 +#define DIR_SEPARATOR_2 '\\' +#endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +char * basename (const char *name); +char * fnqualify(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup ((char *) basename (argv[0])); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + newargz[1] = fnqualify(argv[0]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + return 127; +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +char * +basename (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha (name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return (char *) base; +} + +char * +fnqualify(const char *path) +{ + size_t size; + char *p; + char tmp[LT_PATHMAX + 1]; + + assert(path != NULL); + + /* Is it qualified already? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha (path[0]) && path[1] == ':') + return xstrdup (path); +#endif + if (IS_DIR_SEPARATOR (path[0])) + return xstrdup (path); + + /* prepend the current directory */ + /* doesn't handle '~' */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ + p = XMALLOC(char, size); + sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); + return p; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit $EXIT_FAILURE + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $echo >> $output "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit $EXIT_FAILURE + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE + fi +fi\ +" + chmod +x $output + fi + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "copying selected object files to avoid basename conflicts..." + + if test -z "$gentop"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + fi + + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + counter=`expr $counter + 1` + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $run ln "$obj" "$gentop/$newobj" || + $run cp "$obj" "$gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit $EXIT_SUCCESS + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit $EXIT_FAILURE + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + cmds=$postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir="/tmp" + test -n "$TMPDIR" && tmpdir="$TMPDIR" + tmpdir="$tmpdir/libtool-$$" + save_umask=`umask` + umask 0077 + if $mkdir "$tmpdir"; then + umask $save_umask + else + umask $save_umask + $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 + continue + fi + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + cmds=$old_postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + cmds=$finish_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit $EXIT_SUCCESS + + $echo "----------------------------------------------------------------------" + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "----------------------------------------------------------------------" + exit $EXIT_SUCCESS + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit $EXIT_FAILURE + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit $EXIT_SUCCESS + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test "$mode" = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + cmds=$postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + cmds=$old_postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + fi + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + fi +fi # test -z "$show_help" + +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit $EXIT_FAILURE +fi + +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to ." + exit $EXIT_SUCCESS + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit $? + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/missing b/missing new file mode 100755 index 0000000..894e786 --- /dev/null +++ b/missing @@ -0,0 +1,360 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2005-06-08.21 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: